1. Introduction
Thank you for choosing the BOAYAL Laser Distance Meter. This device is designed for easy and accurate measurement of length, height, area, and volume, making it an ideal tool for interior designers and various measurement tasks.

Figure 1: BOAYAL Laser Distance Meter, highlighting its ease of use for various measurements.
2. Safety Instructions
Please read these safety instructions carefully before using the product. Failure to do so may result in hazardous laser radiation or electric shock. The person responsible for the equipment must ensure all users understand and adhere to these instructions.
- This product is a Class 2 laser product. DO NOT stare into the beam at any time when operating this product.
- DO NOT look directly into the beam with optical aids.
- DO NOT remove any safety labels on this product.
- The laser will switch off automatically after 30 seconds of inactivity, and the instrument will power off after 3 minutes of inactivity.
3. Setup
3.1 Unpacking Inspection
Upon receiving the product, unpack and check for any damage or missing items. If any issues are found, contact your local sales service agency.
- Mainframe (Laser Distance Meter)
- User Manual
- AAA Battery (2x1.5V) - Note: Batteries are not included and must be purchased separately.

Figure 2: Contents of the product package.
3.2 Battery Installation
To install the batteries:
- Open the battery compartment cover.
- Insert two AAA 1.5V batteries, ensuring correct polarity.
- Close the battery compartment cover securely.
Caution:
- Do not mix new and old batteries. Use only alkaline or rechargeable batteries.
- Replace batteries when the battery symbol flashes permanently on the display.
- Remove batteries if the instrument will not be used for an extended period.
- Dispose of used batteries responsibly according to national and local regulations.
3.3 Measurement Reference
The device allows you to switch between front and post benchmarks for measurements. The default setting uses the rear edge as the reference.

Figure 3: Explanation of front and post benchmark icons.
4. Operating Instructions
4.1 Key Functions and LCD Display
Familiarize yourself with the device's buttons and display icons:

Figure 4: Key functions of the BOAYAL Laser Distance Meter.
- ON/MEASURE Button: Power on and initiate measurement.
- +/- / History Button: Addition and subtraction, data query forward/backward.
- UNITS Button: Function selector (Area, Volume, Pythagorean, etc.), unit conversion (m/ft/in).
- Reference/Backlight Button: Switch measurement reference key, display backlight switch.
- C/OFF Button: Clear last command, power off.
- Spirit Bubble: For horizontal leveling.
4.2 Power On/Off
- Power On: Long press the ON/MEASURE button. The equipment will switch on with default settings (single measurement mode, rear reference, metric unit).
- Power Off: Long press the C/OFF button. The laser will switch off automatically after 30 seconds of inactivity, and the equipment will power off after 3 minutes of inactivity.
4.3 Unit Conversion
In measurement mode, short press the UNITS button to cycle through distance units: meters (m), feet (ft), and inches (in).
4.4 Single Measurement
In boot state, short press the ON/MEASURE button to turn on the laser. Aim the laser point at the object to be measured. Short press the ON/MEASURE button again to trigger a single measurement. The result will be immediately displayed on the screen.

Figure 5: Illustration of single and continuous measurement.
4.5 Continuous Measurement
In standby mode, a long press of the ON/MEASURE button will trigger continuous measurement. The current value is displayed below the screen. The results of the measurement (Min/Max) are immediately displayed on the screen.
4.6 Area Measurement
Press the UNITS button repeatedly until the area measurement icon (m²) appears. Follow the prompts on the screen to take the necessary length and width measurements. The device will automatically calculate and display the area.

Figure 6: Steps for Area and Volume measurement.
4.7 Volume Measurement
Press the UNITS button repeatedly until the volume measurement icon (m³) appears. Follow the prompts on the screen to take the necessary length, width, and height measurements. The device will automatically calculate and display the volume.
4.8 Pythagorean Theorem Measurement
Press the UNITS button repeatedly until the Pythagorean theorem icon appears. Follow the on-screen prompts to measure the hypotenuse (A) and base (B). The device will automatically calculate and display the height (H).

Figure 7: How to perform Pythagorean theorem measurement.
4.9 Addition and Subtraction Functions
The current measurement result can be added to or subtracted from the previous one using the +/- button.
4.10 Historical Data Record
The device stores up to 20 sets of measurement data automatically. Press the +/- button to view the measurement history. Use the forward/backward keys to scroll through the stored measurements.

Figure 8: Data storage and automatic shutdown features.
4.11 Clear Button
Pressing the C/OFF button will clear the last command or displayed data.
5. Maintenance
5.1 Prohibited Use
- Do not open the equipment using tools unless specifically instructed.
- Do not immerse the equipment in water or any other liquids.
- Do not clean the lens with alcohol or any other organic solvent.
- Do not touch the lens directly with fingers or other rough surfaces.
- Do not power the equipment beyond the rated DC voltage.
5.2 Cleaning
To clean the device, use a soft, dry cloth. For the optical lens, use a lens cleaning cloth to avoid scratches.
6. Troubleshooting
If you encounter any issues, refer to the message codes below:
| Message Code | Description |
|---|---|
| 204 | Calculation error |
| 207 | Too far / Too close |
| 208 | Weak signal |
| 209 | Strong signal |
If the problem persists, contact customer support.
7. Specifications
The BOAYAL Laser Distance Meter comes in various measurement ranges. Below are the general technical parameters:

Figure 9: Product dimensions and technical parameters.
| Parameter | Specification |
|---|---|
| Model | D40, D60, D80, D100 |
| Measurement Range | 0.05-40m, 0.05-60m, 0.05-80m, 0.05-100m |
| Measurement Accuracy | ±2.0mm |
| Distance Unit | m (metre), ft (feet), in (inch) |
| Laser Wavelength | 620-690nm |
| Laser Class | Class 2 (<1mW) |
| Single Measurement Time | 0.25s/Time (Seconds/time) |
| Working Temperature | 0 ~ +40℃ |
| Storage Temperature | -20 ~ +65℃ |
| Battery Type | AAA 2x1.5V (Alkaline) |
| Battery Measurable Times | > 5000 |
| Weight (without batteries) | About 72g |
| Size | 110x40x24mm |
| Certification | CE, FCC, RoHS, KC, WEEE |
Maximum deviation or shorter range may occur under unfavorable conditions such as bright sunlight, weak reflection, or very rough/high surfaces, or extreme temperatures. When measuring within 10m, accuracy is ±2.0mm. For distances over 10m, accuracy is calculated as ±2.0mm + 0.05mm/m.
8. Warranty and Support
8.1 Warranty Information
The product comes with a warranty. Please refer to the warranty card included in your package for specific terms and conditions. Keep your proof of purchase for warranty claims.
8.2 User Manual (PDF)
For a downloadable version of the user manual, please refer to the official PDF document: BOAYAL Laser Distance Meter User Manual (PDF).
9. User Tips
- For best accuracy, ensure a clear line of sight between the device and the target.
- Use a stable surface or tripod when taking measurements to minimize movement and improve precision.
- Always check the battery level before starting important measurements to avoid interruptions.
- In bright outdoor conditions, using a reflective target plate can help improve measurement accuracy and range.
- Keep the laser lens clean to ensure accurate readings.