1. Safety Information
- Do not operate the interior lights while driving to ensure driving safety.
- Avoid contact with high-temperature areas of the bulbs to prevent burns.
- This product is for indoor vehicle use only; it is not intended for exterior vehicle lighting.
2. Package Contents
The ABRIGHT Car Interior LED Light Kit provides super bright LED bulbs to replace original halogen bulbs, enhancing your car's interior lighting and modern appearance. The package contents vary slightly based on the vehicle's model year:
For Toyota Fortuner (2005-2014) - 7 Pieces
- Front Dome/Map Light (2 pieces)
- Rear Dome/Map Light (1 piece)
- Glove Box Light (1 piece)
- Trunk Light (1 piece)
- License Plate Light (2 pieces)
For Toyota Fortuner (2015-2021) - 6 Pieces
- Front Dome/Map Light (2 pieces)
- Rear Dome/Map Light (1 piece)
- Trunk Light (1 piece)
- License Plate Light (2 pieces)
3. Specifications
| Feature | Description |
|---|---|
| Model Name | Car LED Interior Light |
| Voltage | 12 V |
| Material | LED |
| Brightness | 300% Brighter than original bulb (white color) |
| Lifetime | Over 50,000 hours |
| Canbus Compatibility | 100% No Error (No ECU Errors) |
| Installation | Plug and Play |
| Application | Dome light, Map light, Trunk light, Vanity mirror light, Glove box light, Door light |
| Package Weight | 0.05 kg |
| Package Dimensions | 11 cm (Length) x 8 cm (Width) x 4 cm (Height) |
4. Installation & Operation Instructions
Follow these steps to install and operate your new ABRIGHT LED interior lights:
- Preparation: Turn off the vehicle's power supply before beginning installation. This prevents electrical shorts and ensures safety.
- Access the Light: Carefully open the interior dome light cover or the cover of the specific light you are replacing (e.g., map light, trunk light). You may need a plastic pry tool to avoid damaging the trim.
- Remove Old Bulb: Gently remove the original halogen bulb. Be cautious as the old bulb may be hot if it was recently in use.
- Install LED Bulb: Insert the new LED strip into the light slot and secure it in place. The design is 'Plug and Play' for direct fitment into the original socket.
- Test Functionality: Power on the vehicle and test the light. If the LED lamp does not illuminate immediately, remove it and re-insert it by turning it over 180 degrees. This corrects the polarity if it was initially incorrect.
- Secure Fitment (if needed): If the bulb feels loose, gently move the metal pin holder closer to ensure a tighter and more secure connection.
- Replace Cover: Once the LED light is working correctly, replace the light cover.
5. Precautions
- Always turn off the vehicle's power supply before installation to prevent electrical hazards.
- Avoid using the LED lights in humid environments to prevent damage to the electronic components.
- Do not disassemble or modify the lamp arbitrarily, as this may void the warranty and cause malfunction.
6. Feature Highlights
- Energy-Efficient: These LED bulbs consume significantly less power compared to traditional halogen bulbs, reducing strain on your vehicle's electrical system.
- Long Service Life: Designed for durability, the bulbs offer an operational life of up to 50,000 hours, minimizing the need for frequent replacements.
- Uniform Illumination: Experience soft, flicker-free light output that provides consistent and comfortable lighting throughout your car's interior.
- Super Bright: Enjoy a 300% brighter light output compared to standard halogen bulbs, improving visibility inside your vehicle.
- Canbus Error Free: Built-in Canbus technology ensures no ECU errors or warning messages appear on your dashboard after installation.
- Easy Installation: The 'Plug and Play' design allows for straightforward installation directly into your car's original sockets without complex wiring.
- Perfect Heat Resistance: Engineered with excellent heat dissipation properties to maintain optimal performance and longevity.
7. Troubleshooting
- Light does not turn on: Check whether the power connection is secure and normal. Ensure the bulb is inserted with the correct polarity (try rotating 180 degrees).
- Low brightness: The LED strip may be improperly positioned. Re-adjust its placement within the light slot.
- Heat generation: Some heat generation is normal for LED bulbs and is not a cause for concern, especially given the product's heat resistance design.
8. User Tips
- For optimal brightness and performance, ensure each LED bulb is securely and correctly seated in its socket. If the light appears dim, double-check the connection.
9. Warranty & Support
This ABRIGHT Car Interior LED Light Kit comes with a 2-year warranty from the date of purchase. For any issues or support, please refer to the official product documentation or contact ABRIGHT customer service.
A detailed user manual in PDF format is available for download: View User Manual (PDF)