NINIVISION DGHBFDGH-8

Contents

NINIVISION 5MP Speaker Camera User Manual

Model: DGHBFDGH-8

Outdoor WiFi IP Camera with Two-Way Audio and Floodlight

Safety Information and Compliance

⚠️ Disclaimer:

Camera products can only be used for purposes permissible under applicable law and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and may radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to attempt to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Important:

Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.

Product Overview

The NINIVISION DGHBFDGH-8 is a versatile 5MP outdoor WiFi IP camera designed for surveillance and illumination. It features high-definition video, two-way audio communication, advanced night vision capabilities, and robust weatherproofing.

NINIVISION 5MP Speaker Camera with features listed

Figure 1: NINIVISION 5MP Speaker Camera highlighting 5MP Ultra HD, Detection, Two-Way Audio, Color Night Vision, Floodlight, WiFi, and SightSys App compatibility.

Key Features:

  • 5MP Ultra HD Video: Capture clearer images and details.
  • Two-Way Audio: Built-in microphone and speaker for real-time communication.
  • Color Night Vision: Enhanced visibility in low-light conditions with full-color, black & white, and smart night vision modes.
  • Motion Detection: Supports humanoid detection and sends push alerts to your app.
  • Integrated Floodlight: Bright 5W LED light with 120° luminous angle and 400-500LM luminous flux for deterrence and illumination.
  • IP66 Waterproof: Designed for reliable outdoor use in various weather conditions (rain, snow, sun).
  • H.265 Video Compression: Saves storage space and bandwidth while maintaining video quality.
  • Flexible Storage: Supports up to 128GB TF card local storage and cloud storage (additional cost may apply).
  • Multi-User Viewing & Remote Control: Access and control the camera remotely via the SightSys app on Android/iOS, supporting up to 10 shared users.
Floodlight Camera with Smart Sensor Light features

Figure 2: Overview of the 5MP Floodlight Camera with Smart Sensor Light features.

Specifications

Feature Specification
Brand NameNINIVISION
Model NumberDGHBFDGH-8
High Definition5.0 Megapixels
Lens (mm)3.6mm
ConnectivityWIFI (2.4GHz)
SensorCMOS (Sony Brand)
AI FunctionsMotion Detection
Color Night VisionYes
IP RatingIP66
Power ModeMains Electricity
Power Supply (V)DC
Power Consumption (W)<3W
SceneIndoor and outdoor
Movement Range (Tilt)-10°-180°
Movement Range (Pan)Other (90° Viewing Angle)
TF Card SupportUp to 128G
Video Compression FormatH.265
IR Distance (m)30-50M
Minimum Illumination (Lux)0.01lux
Supported Mobile SystemsAndroid, iOS
Supported Operating SystemsWindows 7, Windows 8, Windows 10
Special FeaturesWaterproof / Weatherproof
CertificationCE, FCC, RoHS
Alarm TypeLocal Alarm, FTP Photo, Email Photo
CE, FCC, RoHS certifications

Figure 3: Product Certifications (CE, FCC, RoHS).

Setup Guide

1. APP Download

To begin, download the CareCamPro application:

  1. Scan the QR code provided on the manual cover or search for "Carecam Pro" in your device's app store.
  2. Download and install the application.
  3. Register for an account and log in.
CareCamPro APP download QR code

Figure 4: Scan this QR code to download the CareCamPro APP.

2. Wireless Connection with Camera

  1. Power on the camera. Wait for 10-15 seconds until you hear the "Welcome to use!" prompt.
  2. Long press the "RESET" button for 3 to 5 seconds. Release the button after hearing a "ding" sound.
  3. Wait for the camera to restart.

3. Adding Device to APP

  1. First Step: In the APP interface, click the "+" icon and select "Add Device".
  2. Second Step: Confirm the camera belongs to the "WiFi camera" or "4G camera" type. Select "Device Scan Code" and check that you heard the "Welcome to use!" prompt tone.
  3. Third Step: Select your WiFi network name and enter the WiFi password. Click "Connect Wi-Fi". (This step is not required for 4G cameras).
  4. Fourth Step: Point the QR code displayed on your mobile phone directly at the camera lens. The camera will send an "OK" prompt, indicating successful configuration. Click "I heard the OK prompt".
  5. Fifth Step: Wait for the camera to complete its configuration.
CareCamPro APP interface for adding device

Figure 5: CareCamPro APP interface showing device list and adding a new device.

4. Adding by Camera Sharing

If you wish to share camera access with family members:

  1. Click the share icon on the device list to enter the share device interface.
  2. Select "Share device to family" and choose the sharing method.
  3. If the family member is nearby, click "Invite by QR code". Once they open the app, click "Scan" to scan the shared QR code.
  4. If the family member is not nearby, click "Invite by Account" and enter their APP account, then click "OK" to complete sharing.

Operating Instructions

1. Two-Way Audio

The camera features a built-in microphone and speaker, allowing you to communicate in real-time with visitors or family members through the SightSys app on your smartphone.

Two-Way Audio feature in use

Figure 6: Two-Way Audio allows real-time conversation via the app.

2. Motion Detection and Alerts

The camera supports humanoid detection. When motion is detected in the monitored area, the camera will send push alerts to your mobile phone. It also supports siren alarms upon human motion detection.

Motion Detection with humanoid detection and alerts

Figure 7: Motion Detection feature with alerts sent to the app.

3. Color Night Vision Modes

The camera incorporates 2 IR LEDs and a warm LED lamp, offering three night vision modes:

  • Infrared Night Vision: Standard black and white night vision.
  • Full-Color Night Vision: Provides color images even in low light.
  • Smart Night Vision: Automatically illuminates the warm LED light for full-color vision when human motion is detected at night.
Color Night Vision modes: human color recognition, full color, black and white

Figure 8: Different night vision modes including full color and black & white.

4. Floodlight Function

The integrated 5W LED floodlight provides bright illumination (400-500 LM, 120° luminous angle, 5M radius luminous distance), serving as both a security deterrent and an outdoor light source.

Bright LED Light 5W for deterrence

Figure 9: The 5W LED floodlight can deter intruders and provide illumination.

5. TF Card Recording Settings

  1. Disconnect the device from the power supply.
  2. Insert the TF card into the card slot, ensuring correct direction, then power on the device.
  3. In the APP device list, click the settings icon Settings icon to enter the setting interface.
  4. Click "Memory Card", select "TF Card Format", and click "Return" to set the interface.
  5. Click "Timed Recording", turn "Switch" on, select the desired time period, and click "Save".
  6. To play back TF card video, click "SD card query" to enter the video playback interface.

6. Cloud Storage Video

Click the device's cloud recording icon Cloud icon to enter the cloud recording package purchase. Select the appropriate package and purchase. After successful purchase, the cloud storage icon will light up next to the device name in the device list. Note: To select the "Event Storage" package, you need to turn on the "Motion Detection" or "Human Detection" function in the alarm settings to record.

Flexible storage options with SD card and cloud

Figure 10: Storage options include local TF card and cloud storage.

7. PC Viewing Guide

  1. PC Software Download: Enter http://yyp2p.cn/care directly through your computer browser. Click "Care PC" to download and install the software.
  2. Log in to the Client: Install the client on your computer, double-click to open it. Enter the account and password registered with your mobile app, then click "Login" to view all devices under your account.

Maintenance

  • Cleaning: Use a soft, dry cloth to clean the camera lens and body. Avoid using harsh chemicals or abrasive materials.
  • Firmware Updates: Regularly check the SightSys app for available firmware updates to ensure optimal performance and security.
  • Environmental Protection: Ensure the camera's IP66 rating is maintained by properly sealing all connections and avoiding direct high-pressure water jets.
  • Power Supply: Use only the specified power supply to prevent damage to the device.

Troubleshooting

Common Connection Issues:

If the camera cannot connect normally using the methods described, please check the following:

  • Ensure your router is properly connected and that Wi-Fi is not disabled or hidden.
  • Verify that your Wi-Fi network name does not contain Chinese characters or other special characters.
  • Confirm that your router is operating on a 2.4GHz network and does not support 5GHz networks for camera connection.

Other Issues:

  • No Video/Poor Quality: Check network connection strength. Ensure the camera lens is clean. Verify power supply.
  • Audio Problems: Ensure microphone and speaker are not obstructed. Check app volume settings.
  • Motion Detection Not Triggering: Verify motion detection settings in the app are enabled and sensitivity is adjusted correctly. Ensure "Event Storage" is enabled if using cloud recording.
  • TF Card Not Recording: Ensure the TF card is inserted correctly and formatted within the app. Check "Timed Recording" settings.

User Tips

  • For optimal night vision performance, ensure there are no obstructions directly in front of the camera's IR LEDs or floodlight.
  • When installing outdoors, choose a location that provides a clear view of the area you want to monitor and is within range of your 2.4GHz Wi-Fi network.
  • Regularly review recorded footage and adjust motion detection sensitivity to minimize false alarms.
  • Consider using cloud storage for an additional layer of data backup, especially for critical surveillance.

Warranty and Support

This product comes with a 3-year warranty from the date of purchase. For any technical support or warranty claims, please contact your seller or refer to the official NINIVISION support channels.

For additional information or to view the original user manual (PDF), please refer to the provided documentation or visit the seller's website. The PDF manual is available at: User manual (PDF).

© 2024 NINIVISION. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.