SHINE-TALE USB COB LED Strip Light with Hand Sweep Sensor

Contents

USB COB LED Strip Light with Hand Sweep Sensor - Instruction Manual

Model: USB COB LED Strip Light with Hand Sweep Sensor

1. Product Overview

The USB COB LED Strip Light provides uniform, soft illumination with no visible light spots. Featuring a hand sweep sensor for convenient on/off and dimming control, this flexible and cuttable LED strip is ideal for various indoor lighting applications.

USB COB LED Strip Light with Hand Sweep Sensor

Figure 1: Product overview showing the COB LED strip, hand sweep sensor, and key features like high color rendering, no spots, cuttable design, and no flicker.

Key Features:

  • Soft and Balanced Lighting: Uniform illumination without light spots or dark areas.
  • High Brightness: High luminous efficacy for bright lighting.
  • Flexible Design: Soft and flexible, can be bent to create various shapes.
  • Customizable Length: Can be cut or joined to achieve desired lengths.
  • Easy Installation: Equipped with strong adhesive tape for simple mounting.
  • High Color Rendering: CRI > 90 for better color accuracy.
  • Energy Efficient: Low energy consumption with strong heat dissipation and long service life.
  • Hand Sweep Sensor: Contactless control for turning on/off and dimming.

2. Setup and Installation

2.1 Preparation

  • Ensure the installation surface is clean, dry, and smooth.
  • Unroll the LED strip carefully to avoid kinks or damage.

2.2 Installation Steps

  1. Clean the Surface: Thoroughly clean the area where you intend to install the light with a cloth to ensure proper adhesion.
  2. Measure and Cut: Measure the desired length for your installation. Cut the LED strip only at the designated "Cut Marks" (typically every 2.5cm or 50mm/1.97in) to avoid damaging the circuit.
  3. Remove Adhesive Backing: Carefully peel off the protective backing from the adhesive tape on the back of the LED strip.
  4. Attach the Strip: Firmly press the LED strip onto the desired surface, ensuring good contact along its entire length.
  5. Connect Power: Connect the USB plug from the sensor cable to a 5V USB power port (e.g., USB wall adapter, power bank, computer USB port).
LED Strip Cutting and Adhesive

Figure 2: Installation details showing the cut points on the LED strip, the strong double-sided adhesive, and the low voltage safety feature.

LED Strip Product Details

Figure 3: Product details illustrating the minimum cut size of 50mm (1.97in), the flexibility of the strip, its smooth and soft light emission, and the double-sided adhesive tape.

2.3 Important Notes for Setup

  • Sensor Placement: Ensure the hand sweep sensor is placed in an accessible location, free from obstructions, and within the 1-5cm detection range.
  • Power Connection: The input side of the sensor cable connects to the 5V USB power supply, and the output side connects to the LED strip. Ensure these connections are correct.
  • Overheating Prevention: Keep the LED strip unfolded before usage to avoid overheating.

3. Operating Instructions

3.1 Hand Sweep Sensor Operation

The LED strip is controlled by an integrated hand sweep sensor, offering contactless operation for convenience.

  1. Turning On/Off: Wave your hand (within 1-5cm) across the sensor to turn the LED strip on or off.
  2. Stepless Dimming: To adjust brightness, hold your hand steady over the sensor. The brightness will gradually increase to its highest level or decrease to its lowest level. Remove your hand when the desired brightness is reached.
Hand Sweep Sensor Dimming

Figure 4: Illustration of the hand sweep sensor in operation, demonstrating the 1-5cm detection range and dimmable brightness from 25% to 100%.

3.2 Important Operating Notes

  • When testing the sensor switch, do not hold the switch body, as this may interfere with its operation.
  • The LED strip is available in Cold White (6500K), Natural White (4000K), and Warm White (3000K) color temperatures.
LED Strip Color Temperatures and Applications

Figure 5: Display of available light colors (6500K, 4000K, 3000K) and various application scenarios in kitchens, bedrooms, and living spaces.

4. Maintenance

The USB COB LED Strip Light requires minimal maintenance.

  • Cleaning: To clean the LED strip, gently wipe it with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the strip or its adhesive.
  • Inspection: Periodically check the adhesive to ensure the strip remains securely attached.

5. Troubleshooting

If you encounter issues with your LED strip, please refer to the following common problems and solutions:

ProblemPossible CauseSolution
LED strip does not light up.
  • No power to the USB port.
  • Incorrect input/output connection on the sensor cable.
  • LED strip cut incorrectly.
  • Check if the USB power source is active.
  • Ensure the sensor cable's input is connected to power and output to the LED strip.
  • Verify cuts were made only at designated marks. Incorrect cuts lead to dead LEDs.
Sensor not responding.
  • Hand too far from sensor.
  • Holding the sensor body during operation.
  • Ensure hand is within 1-5cm of the sensor.
  • Avoid touching the sensor body when waving or holding for dimming.
LED strip gets hot.
  • LED strip is folded or coiled during operation.
  • Ensure the LED strip is fully unfolded and laid flat before and during use to allow for proper heat dissipation.
Slight color temperature variation.
  • Normal manufacturing variation between batches.
  • This is a normal characteristic of LED manufacturing and not a quality problem.

Note: Soldering is widely used in electronic products and is not considered a quality problem.

6. Specifications

FeatureSpecification
Product TypeUSB 5V COB LED Strip Light
Working VoltageDC 5V
Lamp BeadsCOB
Length Options1m / 2m / 3m / 4m / 5m
COB Width8mm
LEDs Quantity320 LEDs/meter
Luminous Flux100 LM/Watt
Waterproof GradeIP20
Color Rendering Index (RA)>90
Light Color OptionsCold White, Natural White, Warm White

7. Warranty and Support

For any warranty claims, technical support, or inquiries regarding your USB COB LED Strip Light, please contact the seller directly through your purchase platform. Please provide your order number and a detailed description of the issue for prompt assistance.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.