I. Warning & Safety Information
- ▲ Do not modify or disassemble the product's circuitry, as this may cause malfunctions or safety hazards.
- ▲ Do not use in damp, high temperature, or flammable/explosive environments.
- ▲ Do not adjust the lights during driving to avoid distractions.
II. Product Overview
The VGETTING LED Car Rear Bumper Reflector Lights are designed to enhance the safety and appearance of your Hyundai Accent, Solaris, or Verna (models 2017-2019). These lights integrate three essential functions: running lights, brake lights, and dynamic turn signals.
Key Features:
- 3-in-1 Functions: Running Lights, Brake Lights, and Dynamic Turn Signals.
- High Quality & Luminance: Utilizes 100% brand new, high-luminance LEDs for superior visibility.
- Easy Installation: Designed for elaborate and straightforward installation.
- Energy Efficient: Consumes significantly less power than standard bulbs while maintaining optimal light output.
- Durable & Waterproof: Features an IP67 waterproof reflector, suitable for all road weather conditions.
- Long Lifespan: LED lifetime up to 50,000 hours, ensuring minimal maintenance costs.
- Enhanced Safety: Improves vehicle visibility, allowing your car to be seen at much further distances and greatly improving reaction time for oncoming motorists.
Product Demonstration Video:
Video demonstrating the product display and various lighting effects.
III. Specifications
| Attribute | Value |
|---|---|
| Light Source | LED |
| Material | ABS, LED |
| Voltage | 12 V |
| Lumens | 3400LM |
| Item Weight | 0.2 kg |
| Item Type | Rear Bumper Lights Assembly |
| Certification | CCC |
| Waterproof Rating | IP67 |
| Package Length | 30 cm |
| Package Width | 7 cm |
| Package Height | 6 cm |
IV. Installation (Setup)
Follow these steps for proper installation of your LED Rear Bumper Reflector Lights:
- Unpack and Verify: Ensure all items listed in the package are present and undamaged.
- Initial Test: Before permanent installation, test the lights by connecting them to a 5-12V power source to confirm functionality.
- Select Location & Clean Surface: Choose the desired installation location on your vehicle's rear bumper. Thoroughly clean the surface to remove any dust, dirt, or oil, which ensures strong adhesion.
- Secure Wiring: Carefully hide the connecting wires under the vehicle's interior panel, sealing strip, or carpet. This prevents the wiring from being exposed or interfering with driving operations. Ensure all wiring harnesses are securely fixed and not loose.
- Connect Wires: Follow the wiring diagram below for correct connections.
Wiring Diagram:
- White wire: Connect to ACC/Tail light
- Black wire: Connect to NEGATIVE (Ground)
- Red wire: Connect to Brake light
- Yellow wire: Connect to Turn Signal
Installation Effect:
V. Operation
Once properly installed and wired, the LED Rear Bumper Reflector Lights will operate automatically in conjunction with your vehicle's existing lighting system:
- Running Lights: The lights will illuminate when your vehicle's running lights are active.
- Brake Lights: The lights will brighten when the brake pedal is pressed.
- Dynamic Turn Signal: The lights will display a dynamic (sequential) amber signal when the turn indicators are activated.
Lighting Effects:
VI. Maintenance
- Wiring Integrity: Periodically check that all wiring harnesses are securely fixed and not loose to prevent electrical issues.
- Environmental Exposure: Avoid exposing the light strip to excessively high temperatures or humid environments to prolong its lifespan.
- Long-Term Storage: If the vehicle is not used for an extended period, ensure all electrical systems, including the lights, are properly shut down to prevent unnecessary power drain.
- Cleaning: Clean the light surfaces with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the lens or housing.
Durability:
VII. Troubleshooting
- Light does not illuminate: Check whether the power connection is secure and normal. Ensure the vehicle's corresponding light function (running, brake, turn signal) is active.
- Incorrect lighting functions: If the lights are not performing as expected (e.g., brake light stays on, turn signal is static), verify all wiring connections according to the diagram. If issues persist, consult a professional auto electrician.
- Overheating: In case of abnormal heat from the lights, discontinue use immediately and allow the unit to cool down. Check for any obstructions or incorrect wiring that might cause excessive current draw.
- Abnormal flashing or odor: If you notice abnormal flashing of lights or any unusual odor, immediately turn off the power and inspect the connections and the unit for any visible damage.
VIII. User Tips
No specific user tips were available from customer reviews or Q&A for this product at this time. Always ensure professional installation if you are unsure about the wiring process.
IX. Warranty & Support
For any questions, concerns, or after-sales service inquiries regarding your VGETTING LED Car Rear Bumper Reflector Lights, please contact the store customer service directly.
A more detailed user manual is available in PDF format. You can access it here: Download User Manual (PDF)