Foreword
Thank you for purchasing the FEELWORLD WT1S 4K wireless video transmission system. This system is equipped with a Transmitter (TX) and Receiver (RX) set, integrating intercom and live streaming capabilities. Featuring a 10Mbps high data rate, SDI (for WT1S), dual HDMI ports, and other professional filmmaking features, it empowers filmmakers, crews, and content creators. Please read this manual carefully before using the product for an optimal experience.
Cautions
- Do not expose this device to extreme hot, cold, dusty, or humid environments.
- Do not scratch the device with sharp objects.
- Do not drop this device from a high place, as this may cause hardware damage.
- This device is designed for non-waterproofing. Do not allow any liquid to penetrate into the device.
- Do not attempt to dismantle, open, or repair this device by non-technical personnel, as this may cause permanent damage.
Key Features
- Dual HDMI & SDI (optional for WT1S) signal interfaces.
- Transmission range up to 1000ft (300m) with ultra-low latency of 0.08 seconds.
- Supports up to 4K30Hz video transmission.
- Includes a Type-C to Ethernet adapter accessory for live streaming.
- The transmitter can be switched to function as a receiver.
- Wireless full-duplex talkback for real-time intercom between director and photographer.
- One transmitter can connect to multiple receivers.
- Grouping mode allows for easy and quick TX/RX pairing.
- Supports APP monitoring for Android/iOS systems.
- Features 13 frequency channels with AUTO channel scan.
Setup Guide
1. Installation Instruction
For optimal performance, ensure proper placement and connection of your WT1S system.
Image: Installation diagram showing a camera connected to the WT1S Transmitter, which wirelessly transmits to the WT1S Receiver. The receiver is connected to a monitor for the director. Both units are powered by F970 batteries or a power bank via USB. It is recommended to install the receiver 2+ meters high and the transmitter 1.7+ meters high from the ground for best reception.
- Powering On: Connect an NP-F battery to the battery slot, or use a USB-C (5V/1.5A) or DC (6-16V) input.
- Antennas: Attach the provided antennas to the antenna ports on both the Transmitter and Receiver.
- Mounting: Use the 1/4-inch screw hole to mount the units on camera arms, cold shoes, or tripods.
2. Port Instruction (WT1S)
Familiarize yourself with the input and output ports on both the Transmitter (TX) and Receiver (RX).
Image: Detailed diagram of the WT1S Transmitter and Receiver units highlighting all input and output ports. The Transmitter features HDMI IN, SDI IN, HDMI OUT, and a 3.5mm earphone port. The Receiver features HDMI OUT 1, HDMI OUT 2, SDI OUT, and a 3.5mm earphone port. Both have antenna ports, power buttons, Type-C ports for power/upgrade, DC power in, OLED screens, UP/DOWN/OK buttons, battery release buttons, NP-F battery slots, and 1/4 screw holes.
Transmitter (TX) Ports:
- Antenna Ports
- Power OFF/ON Button
- Type-C Power Input/Upgrade Port
- DC Power IN Port
- OLED Screen
- UP Button
- OK Button
- DOWN Button
- HDMI Signal Output
- HDMI Signal Input
- SDI Signal Input
- 3.5mm Earphone Port
- 1/4 Screw Hole
- NP-F Battery Slot
- Battery Release Button
Receiver (RX) Ports:
- Antenna Ports
- Power OFF/ON Button
- Type-C Power In/Streaming/Upgrade Port
- DC Power IN Port
- OLED Screen
- UP Button
- OK/MENU Button
- DOWN Button
- HDMI Signal Output 1
- HDMI Signal Output 2
- SDI Signal Output (optional)
- 3.5mm Earphone Port
- 1/4 Screw Hole
- NP-F Battery Slot
- Battery Release Button
3. Initial Pairing
The WT1S supports both Pairing Mode (manual) and Grouping Mode (automatic).
Pairing Mode (Manual WPS Pairing):
- One Transmitter can pair with up to four Receivers.
- Turn on WPS on both the Transmitter and Receiver simultaneously.
- Once paired, turn off the receiver that has finished pairing.
- Repeat the process for additional receivers.
- Finally, turn on all paired devices.
Grouping Mode (Automatic Pairing):
Image: Diagram illustrating the grouping mode where one transmitter can connect to multiple receivers automatically if they are set to the same group and channel. For example, a TX set to Group A, Channel 03 will automatically link with an RX set to Group A, Channel 03.
- Set both the Transmitter and Receiver to the same group and channel (e.g., TX: Group A, CH03; RX: Group A, CH03).
- The devices will connect automatically.
Operating Instructions
1. User Interface (UI) Instruction
Startup:
Upon powering on, the FEELWORLD logo will display, followed by the main menu.
Main Menu:
The main menu displays critical information including channel, device type (TX/RX), link status, signal strength, video format, intercom mode, battery level, temperature, and fan status.
- Channel Switch: Press "UP" or "DOWN" to change channels. Press "OK" to confirm the channel.
Secondary Menu:
- Long press "OK" for 2 seconds to enter the secondary menu. Long press "OK" for 2 seconds again to return to the main menu.
- Press "UP" or "DOWN" to switch options. Press "OK" to confirm selection.
- Device (TX only): Switch between TX (transmitter) and RX (receiver) manually.
- FAN Status: Turn the fan ON or OFF manually.
- Intercom: Switch between Full Duplex, TD mode (TX speaks, RX listens), or OFF.
- WIFI SSID: Displays device name and password.
- Version: Shows the device's firmware version.
- Web: Displays the FEELWORLD website.
- Telephone: Displays customer service contact number.
- IP (RX only): Displays IP address (routeIP, staticIP).
- Language: Select English or Chinese.
- Working Mode: Select Pairing mode or Grouping mode.
2. Streaming Instruction
The WT1S allows for effortless live streaming using a Type-C to Ethernet adapter.
Image: Diagram showing two streaming methods: Static IP Streaming and Route IP Streaming. Both involve connecting the WT1S Receiver to a Type-C to Ethernet Adapter, then via LAN cable to a computer running OBS or similar software for streaming to platforms like YouTube, Facebook, or Twitch.
Static IP Streaming:
- Ensure the receiver is linked to the transmitter and receiving video.
- Plug the Type-C to Ethernet adapter into the receiver's Type-C port. The adapter will flash red.
- Select "staticIP" in the receiver's secondary menu (IP -> staticIP).
- Connect the Type-C to Ethernet adapter to your computer via a LAN cable.
- The receiver's static IP is 192.168.11.111. Set your computer's static IP to 192.168.11.xxx (where xxx is 2-254, not 111).
- Verify connection by running
CMD->ping 192.168.11.111on your computer. - Use the URL
rtsp://192.168.11.111:554/test.264in streaming software like VLC or OBS.
Route IP Streaming:
- Enter the receiver's secondary menu (IP -> routeIP).
- Connect a monitor to the receiver.
- Connect the receiver to a router via the Type-C to Ethernet adapter. A flashing blue light on the adapter indicates a good connection. The monitor will display the IP address.
- Connect your computer to the same router.
- Use the URL
rtsp://[IP address shown on monitor]/test.264for streaming. - Note: The router's IP address must be in the same network segment as the device's IP address.
3. Smart APP Monitoring and Recording
The "Feelworld Wireless 2" APP offers extensive monitoring functions.
Image: A smartphone screen displaying the "Feelworld Wireless 2" app interface, showing various monitoring tools like waveform, vector scope, histogram, false colors, LUT, nine grid, pixel to pixel, image flip, scan mode, focus assist, exposure tips, monochrome display, deformation mode, center mark, safety frame, mask mark, audio column, image freeze, and image overlay. Download links for App Store and Google Play are also visible.
APP Download:
- iOS: Search "feelworld wireless 2" on the App Store.
- Android: Search "feelworld wireless 2" on Google Play.
Connecting Smart Devices:
- Power on the transmitter.
- On your smartphone/tablet, go to Settings > Wireless & networks.
- Select the transmitter's Wi-Fi name (e.g., FEELWORLD_5G_XXXXX) and enter the password (default: 12345678).
- Open the "Feelworld Wireless 2" app and click "Go" to enter the monitoring interface.
APP Operation (iOS Example):
- Click the settings icon to access all monitoring auxiliary functions.
- Click on a function to add it to the top shortcut bar.
- Click on a function in the shortcut bar to quickly turn it ON or OFF.
Function Settings and Instructions:
- All Waves: Displays waveform, vector, and histogram.
- Waveform: Assists with exposure calibration and lighting evenness.
- Vector: Shows image saturation and color spectrum.
- Histogram: Displays color tone distribution (RGB) and brightness (Y).
- Focus Assist: Highlights in-focus areas.
- Exposure Tips: Highlights overexposed areas.
- False Colors: Depicts objects in colors different from a true color image.
- Monochrome Display: Adjusts hue and saturation.
- LUT: Loads 3D-LUT tables for color tone recombination (built-in SLOG2, LOGC, SLOG3, VLOG).
- Deformation Mode: Unsqueezes anamorphic footage.
- Nine Grid: Divides the picture into equal grids.
- Center Mark: Displays a center crosshair.
- Safety Frame: Displays various aspect ratio safety frames.
- Mask Mark: Applies a mask to the image.
- Image Flip: Flips the image (T&B, L&R, ALL).
- Scan Mode: Switches between "Under Scan" and "Over Scan".
- Pixel to Pixel: Displays a 1:1 signal source without scaling.
- Image Freeze: Freezes the current image.
- Image Overlay: Overlays a screenshot image from the APP.
- Audio Column: Provides numerical indicators for audio levels.
- Record: Initiates recording.
- Playback: Accesses recorded videos.
4. Full Duplex Intercom
Image: A person wearing a headset connected to the WT1S Transmitter, demonstrating the full-duplex intercom function for real-time communication between crew members.
The WT1S features an intercom function for real-time communication between the director and photographer, eliminating the need for an additional intercom system.
5. Smart Channel Scan
Image: The OLED screen of the WT1S Receiver displaying the results of a channel scan, indicating available (checked) and occupied (crossed) channels from 1 to 13.
The receiver's smart channel scan function helps identify occupied channels and select available ones for optimal signal transmission.
6. TX to RX Switching
Image: Diagram showing how a WT1S Transmitter unit can be reconfigured to act as a Receiver. This allows for flexible setups, such as one Transmitter and three Receivers if two WT1S sets are purchased.
The transmitter unit can be flexibly switched to function as a receiver, offering greater versatility in multi-unit setups.
Maintenance
1. Cleaning
- Use a soft, dry cloth to clean the device's exterior.
- Do not use liquid cleaners or solvents, as they may damage the finish or internal components.
- Keep ports free of dust and debris.
2. Battery Care
- Always use compatible NP-F batteries or power sources within the specified voltage range (DC 6-16V, USB-C 5V/1.5A).
- Remove batteries if the device will not be used for an extended period.
- Store batteries in a cool, dry place.
3. Efficient Cooling System
Image: Diagram illustrating the WT1S's efficient cooling system. The fan speed adjusts automatically to prevent overheating and ensure stable signal transmission. Users can also manually turn off the fan for audio-critical scenarios where no fan noise is permissible.
The WT1S features a fan cooling system to prevent overheating and ensure stable signal transmission. The fan is on by default and automatically adjusts its speed based on temperature. For noise-sensitive environments, the fan can be manually turned off.
Troubleshooting
Common Problems and Solutions:
-
Screen appears mosaic or signal connection is unstable:
This indicates Wi-Fi signal interference near the transmission frequency. Re-select another channel. (Note: Only the receiver can adjust the channel).
-
Transmitter and receiver cannot connect in pairing mode:
Turn off both the transmitter and receiver, then turn them on again simultaneously. Re-enable WPS mode to pair again.
-
Weak signal frequency:
Try choosing another channel with a wider frequency span. For example, if channel 8 is weak, try channel 1 or 5 instead of 7 or 9.
-
Poor Wi-Fi reception on mobile phone:
This can be related to the brand and model of the mobile phone. Try using a different mobile phone for monitoring.
Specifications
| Parameter | Transmitter (TX) | Receiver (RX) |
|---|---|---|
| Screen | OLED | OLED |
| Interface | 1* SDI input (optional), 1* HDMI input, 1* HDMI output, 2* Antenna port (RP-SMA Male), DC power input, 3.5mm headphone jack, Type-C | 2* HDMI output, 1* SDI output (optional), 2* Antenna port (RP-SMA Male), DC power input, 3.5mm headphone jack, Type-C |
| Power Supply Way/Voltage Range | F970 battery, Type-C: 5V/1.5A, DC adapter: 6-16V (ensure battery output <16V) | F970 battery, Type-C: 5V/1.5A, DC adapter: 6-16V (ensure battery output <16V) |
| Power Consumption | <5.5W | <6W |
| HDMI Input/Output Video Format | 480P60, 576P60, 720P60/59.94/50, 1080P60/59.94/50/30/29.97/25/24/23.98, 1080I60/59.94/50 (HDMI Type A) | 480P60, 576P60, 720P60/59.94/50, 1080P60/59.94/50/30/29.97/25/24/23.98, 1080I60/59.94/50 (HDMI Type A) |
| SDI Input/Output Video Format | 480P60, 576P60, 720P60/59.94/50, 1080P60/59.94/50/30/29.97/25/24/23.98, 1080I60/59.94/50 (1*BNC) | 480P60, 576P60, 720P60/59.94/50, 1080P60/59.94/50/30/29.97/25/24/23.98, 1080I60/59.94/50 (1*BNC) |
| Frequency | 5.1-5.9GHz | 5.1-5.9GHz |
| Modulation Mode | OFDM | OFDM |
| Transmission Power | 22dBm | / |
| Receiving Sensitivity | / | -87dBm |
| Band Width | 20/40MHZ | 20/40MHZ |
| Latency | Min0.08S | Min0.08S |
| Intercom Frequency Response Range | 20Hz~20KHz | 20Hz~20KHz |
| Operating Temperature | 0℃ ~ 40℃ | 0℃ ~ 40℃ |
| Storage Temperature | -20℃ ~ 60℃ | -20℃ ~ 60℃ |
| Unit Size (mm) | 77.1x30x118.6 (excluding antenna) | 77.1x30x118.6 (excluding antenna) |
| Unit Weight | 138.8g | 138.8g |
Package Contents:
Image: The WT1S package includes one Transmitter, one Receiver, multiple antennas, a cold shoe mount, a USB-C to Ethernet adapter, a USB-A to USB-C adapter, and a Quick Start Guide.
- 1x Transmitter
- 1x Receiver
- Antennas
- 1x Cold Shoe Mount
- 1x USB-C to Ethernet Adapter
- 1x USB-A to USB-C Adapter
- 1x Quick Start Guide
User Tips
- For best signal stability, ensure line-of-sight between the transmitter and receiver.
- Always check for available channels using the smart channel scan feature before starting a shoot to avoid interference.
- Utilize the full-duplex intercom for seamless communication with your crew, especially in dynamic shooting environments.
- When live streaming, ensure your network configuration (Static IP vs. Route IP) matches your setup for a smooth broadcast.
- Keep the firmware updated to benefit from the latest features and performance improvements.
Warranty and Support
FEELWORLD products are designed with quality and stability in mind. This product typically comes with a 1-year warranty from the date of purchase. For detailed warranty terms, service, and technical support, please refer to the official FEELWORLD website or contact your local distributor.
As product features and performance are continuously improved, specifications are subject to change without prior notice. Please refer to the latest user manual available on the official FEELWORLD website for the most up-to-date information.