Introduction
Thank you for choosing the GuliKit ES/ES PRO Wireless Controller. This manual provides detailed instructions on how to set up, operate, maintain, and troubleshoot your controller to ensure an optimal gaming experience. The GuliKit ES and ES PRO controllers offer advanced features like Hall Effect joysticks, motion controls, and multi-platform compatibility.
Package Contents
- GuliKit ES or ES PRO Wireless Controller
- USB-C to USB-A Data Cable (Included with ES PRO; ES model requires separate USB-C cable)
- User Manual (this document)
Controller Overview
Familiarize yourself with the buttons and ports on your GuliKit ES/ES PRO controller:

Figure 1: GuliKit ES PRO Controller Layout
- USB-C Port: For charging and wired connection.
- Indicator Light: Orange (Charging), Green (Fully charged), Flashing (Pairing mode), Solid White (No custom settings), Solid Blue (Custom settings configured).
- Home Button: Press to power on. Press and hold to power off.
- Setting Button: Used in combination with other buttons to configure controller settings.
- Pairing Button: Press and hold to enter pairing mode.
- Power-Off Button: Press to power off.
- Slide Switch: To change controller mode (PC, NS).
Setup
Charging the Controller
Connect the USB-C end of the data cable to the controller and the USB-A end to a power source (e.g., computer USB port, USB wall adapter). The indicator light will be orange while charging and turn green when fully charged.
Pairing Methods
Ensure the controller is adequately charged before attempting to pair.
1. Pairing with PC
Bluetooth Pairing (730Hz Polling Rate):
- Switch the controller to PC mode using the slide switch.
- Press and hold the Pairing Button for 2 seconds until the indicator light flashes rapidly, indicating pairing mode.
- On your computer, open Bluetooth settings, search for new devices, and select "GuliKit XW Controller" to pair.
- Once "Connected" is displayed, pairing is complete.
Wired Connection (1000Hz Polling Rate):
- Set the controller to PC mode.
- Connect one end of the USB-C to USB-A data cable to the controller and the other end to a USB-A port on your computer. For desktop PCs, using a rear USB port is recommended for stability.
2. Pairing with Android Devices
- Set the controller to PC mode.
- Press and hold the Pairing Button for 2 seconds until the indicator light flashes rapidly.
- On your Android device, go to Bluetooth settings, search for new devices, and select "GuliKit XW Controller".
- Once "Connected" is displayed, pairing is complete.
3. Pairing with Nintendo Switch/Switch 2
- Set the controller to NS mode.
- Turn on the controller, then press and hold the Pairing Button for 2 seconds. The indicator light will flash rapidly.
- Wake up your Switch/Switch 2 (if in sleep mode) by pressing the HOME button on a Joy-Con. It will enter the controller pairing interface.
- Once the interface shows a new controller is connected, pairing is complete.
Operating Instructions
Power On/Off
- Power On: Press the Home Button.
- Power Off: Press and hold the Home Button.
- Automatic Power Off: The controller will automatically power off after 15 minutes of inactivity. It will not power off if connected via USB or if Auto-Continuous Fire (Turbo) is active.
Customized Settings
All customized settings require holding the Setting Button while pressing the corresponding buttons. When custom settings are active, the indicator light will turn blue; otherwise, it remains white. If the battery is low, the indicator light will flash, and vibration will automatically turn off until the battery level is restored.
1. Joysticks Calibration
- While the controller is powered on, press and hold the "L," "R," "D-pad Left," and "B" buttons simultaneously for 6 seconds to enter calibration mode.
- Rotate both the left and right joysticks in full circles 2 to 3 times.
- The controller will vibrate once to indicate successful calibration and automatically exit calibration mode.
2. Gyroscope Calibration
- While the controller is powered on and placed on a flat surface, press and hold the "+", "-", "D-pad Left", and "B" buttons simultaneously.
- The controller will vibrate once to indicate successful calibration.
Note: Calibration is not necessary if the gyroscope is functioning normally.
3. Clear All Settings (Reset)
- Press and hold Setting Button + Home Button. A long vibration indicates the reset is complete, and the controller is restored to default settings.
4. Joystick Dead Zone Setting
- Press and hold Setting Button + D-pad Down. One vibration: Dead zone enabled. Long vibration: Dead zone disabled (Default).
5. Continuous Fire (Turbo) Setting
- Press and hold Setting Button + (A/B/X/Y/R/ZR).
- One vibration: Manual Turbo Mode (fire while holding).
- Two vibrations: Auto Turbo Mode (press once to start, press again to stop).
- Long vibration: Disables both turbo modes (Default).
6. A-B X-Y Button Swap (ES PRO Only)
- Press and hold Setting Button + D-pad Up.
- One vibration: Swaps A-B and X-Y input functions.
- Long vibration: Restores default assignments (Default).
7. Adjust Vibration Intensity
- Press and hold Setting Button + D-pad Right.
- One vibration: Weak. Two vibrations: Standard (Default). Three vibrations: Strong. Long vibration: Off.
8. Adjust Joystick Sensitivity (ES PRO Only)
- Press and hold Setting Button + R3 (Right Joystick Press).
- One vibration: 50% sensitivity. Two vibrations: 100% sensitivity (Default). Three vibrations: 150% sensitivity.
9. Set 4-Direction Mode on D-Pad (ES PRO Only)
- Press and hold Setting Button + L3 (Left Joystick Press).
- One vibration: Switches D-pad to 4-direction mode.
- Long vibration: Restores default 8-direction mode (Default).
10. Adjust Motion Aim Assist for PC FPS Games (ES PRO Only)
- Press and hold Setting Button + ZL.
- One vibration: Low-sensitivity. Two vibrations: Medium-sensitivity. Three vibrations: High-sensitivity. Long vibration: Disabled (Default).
Maintenance
Battery Care
The controller is equipped with a 950mAh Polymer Battery, providing up to 30 hours of playtime (based on full-auto Turbo mode testing with non-vibration). It features zero power consumption in standby, allowing a fully charged and stored controller to still turn on after a year.
- Avoid exposing the controller to extreme temperatures.
- Charge the controller regularly, even if not in use, to maintain battery health.
Cleaning
Use a soft, dry cloth to clean the controller. Do not use harsh chemicals or abrasive materials, as they may damage the surface.
Troubleshooting
Controller Drifting or Unintended Movement
- If you experience unintended joystick movement (drift), perform the Joysticks Calibration procedure detailed in the Operating Instructions.
- Ensure the controller's firmware is up to date (check GuliKit's official website for updates).
Connectivity Issues or High Latency
- Re-pair the controller: Delete the controller from your device's Bluetooth list and re-pair it.
- Check battery level: Low battery can affect wireless performance.
- Bluetooth Interference (Windows 10/11): Disable "Show notifications to connect using 'Swift Pair'" in Windows Bluetooth settings. Enabling this feature can add ~1ms latency and reduce the report rate.
- Multiple Bluetooth Devices: If connecting multiple devices to one Bluetooth adapter, bandwidth sharing may lower polling rates. For optimal performance, use one adapter per controller.
- Wi-Fi Interference: Use 5GHz Wi-Fi to avoid 2.4GHz interference with Bluetooth, which may reduce polling rates.
- Wired Connection: If wireless issues persist, try connecting the controller via USB-C cable.
Settings Not Applying
- Ensure you are holding the Setting Button correctly while pressing the corresponding function button.
- Observe the indicator light: it should turn blue if custom settings are successfully applied.
Specifications
| Brand | GuliKit |
| Model | ES / ES PRO |
| Compatible Platforms | Nintendo Switch, Switch 2, Windows, Android, iOS |
| Connectivity | Bluetooth, Wired (USB-C) |
| Joystick Type | ES: Hall Effect (2200-level precision) ES PRO: TMR (4000-level precision) |
| Trigger Button Type | 256-Level Hall Effect Linear Triggers |
| Battery | 950mAh Polymer Battery |
| Battery Life | Up to 30 hours (non-vibration, full-auto Turbo mode) |
| Polling Rate | Wired: 1000Hz Bluetooth: 730Hz |
| Latency | Wired: 1.87ms Bluetooth: 3.25ms |
| Vibration | Asymmetric Rotory Vibration Motors (3-level adjustment, optional on/off) |
| Gyroscope | Built-in for motion controls |
| D-pad | Tactile Switch D-pad |
| Package Dimensions | 10cm (L) x 15cm (W) x 8cm (H) |
| Package Weight | 0.401 kg |
User Tips
- Linux Compatibility: This controller is highly regarded for Linux users as all features and firmware updates are handled directly via controller buttons, eliminating the need for additional software.
- No Software Needed: All extra features like gyro, turbo, and button remapping are configured directly on the controller, making it convenient and driver-free.
- Optimize Bluetooth Latency (Windows): For Windows 10/11, disable "Show notifications to connect using 'Swift Pair'" in Bluetooth settings to reduce latency.
- Dedicated Bluetooth Adapter: If using multiple Bluetooth devices, consider using a dedicated Bluetooth adapter for each controller to maintain optimal polling rates.
- Avoid Wi-Fi Interference: To minimize potential interference with Bluetooth, use a 5GHz Wi-Fi network instead of 2.4GHz.
- Drift Correction: If you experience any joystick drift, perform the joystick calibration procedure outlined in this manual.
- LED Brightness: The LED indicator can be quite bright; if desired, a dimming tape can be applied.
Warranty and Support
For the latest support, FAQs, and warranty information, please visit the official GuliKit website:
Please refer to the website for detailed warranty terms and conditions applicable to your region.