1. Introduction
Thank you for choosing the LCQPTW Tire Dust Proof Plug Wheel Hub Cap. This product is designed to protect your electric scooter's wheel hubs from dust, dirt, and water ingress, ensuring smoother operation and prolonging the life of your scooter's components. Made from durable rubber, these caps offer a simple yet effective solution for maintaining your scooter.
2. Compatibility
This product is compatible with the following electric scooter models:
- Xiaomi M365 Pro
- Xiaomi 1S
- Xiaomi Mi3
- Ninebot Max G30
- Ninebot Max G30D
- Ninebot Max G30LP
Please verify your scooter model before installation to ensure proper fit.
3. Package Contents
Your package should contain:
- 2 x Tire Dust Proof Plugs (Black Rubber)

Figure 1: Example of product packaging and plugs.
4. Setup and Installation
Installation of the dust proof plugs is simple and requires no special tools. Please refer to the product diagrams for visual guidance.
- Prepare the Wheel Hub: Ensure the aperture (hole) in your scooter's wheel hub is clean and free of any dirt, dust, or debris. A clean surface ensures a secure fit.
- Align the Plug: Take one dust proof plug and align its narrower end with the hole in the scooter's wheel hub.
- Insert the Plug: Gently push the plug into the aperture. Apply steady, even pressure until the plug sits flush with the surface of the wheel hub. The flexible rubber material will conform to the opening.
- Verify Security: Once inserted, gently tug on the plug to ensure it is securely seated and will not easily fall out during scooter operation.

Figure 2: Illustration of plug insertion into the scooter wheel hub.

Figure 3: Dust plugs protecting the wheel from dust and dirt.
5. Operating Instructions
Once installed, the dust proof plugs operate passively. Their primary function is to seal the wheel hub aperture against environmental elements. No active operation is required.
- Periodically check that the plugs remain securely in place, especially after riding in rough terrain or wet conditions.
6. Maintenance
These dust proof plugs are made from high-quality, durable rubber and require minimal maintenance.
- Cleaning: If the plugs become dirty, wipe them clean with a damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these may damage the rubber.
- Inspection: Periodically inspect the plugs for any signs of wear, tear, or damage. If a plug appears cracked, torn, or no longer fits snugly, it should be replaced to maintain optimal protection.
7. Troubleshooting
Plug Does Not Fit
- Check Compatibility: Ensure your scooter model is listed in the compatibility section.
- Verify Aperture Size: The plugs are designed for a 0.9cm aperture. Measure your wheel hub hole if unsure.
Plug Falls Out
- Ensure Full Insertion: Make sure the plug was pushed in completely until it sat flush.
- Clean Aperture: Dirt or debris in the hole can prevent a secure fit. Clean the aperture thoroughly.
- Inspect Plug: If the plug is damaged or deformed, it may not hold securely. Replace with a new plug.
8. Specifications
| Brand | LCQPTW |
| Material | High-Quality Rubber |
| Color | Black |
| Overall Height | 1 cm |
| Top Diameter | 0.6 cm |
| Base Diameter | 1 cm |
| Inner Plug Height | 0.6 cm |
| Suitable Aperture Size | 0.9 cm |

Figure 4: Product dimensions and suitable aperture size.
9. User Tips
- Before your first ride after installation, always double-check that the plugs are firmly seated to prevent loss.
- Consider carrying a spare plug if you frequently ride in conditions where they might be dislodged.
10. Warranty and Support
For any questions, concerns, or support regarding your LCQPTW Tire Dust Proof Plug Wheel Hub Caps, please contact the seller or retailer from whom you purchased the product. Please retain your proof of purchase for any support inquiries.
11. Safety Information
WARNING:
- To avoid danger of suffocation, keep any plastic packaging bags away from babies and children.
- Do not use plastic bags in cribs, beds, carriages, or playpens.
- This plastic bag is not a toy.