AVATTO GW90-POE-Ti

Contents

AVATTO Zigbee3.0 PoE Dongle User Manual

Model: GW90-POE-Ti | Brand: AVATTO

1. Introduction

The AVATTO Zigbee 3.0 PoE Dongle (Model: GW90-POE-Ti) is a versatile Zigbee gateway designed to connect Zigbee devices with open-source smart home platforms like Home Assistant and Zigbee2MQTT. It features an ESP32+CC2652P chip, supports Power over Ethernet (PoE), and offers multiple connectivity options including Ethernet, WiFi, and USB, making it adaptable to various application scenarios.

The device includes a web console accessible via mDNS for easy management, allowing for firmware updates and mode switching. Additional functionalities such as Webhook, MQTT, and VPN are also integrated.

AVATTO Zigbee 3.0 PoE Dongle with antennas, showing compatibility with Home Assistant and Zigbee2MQTT.
The AVATTO Zigbee 3.0 PoE Dongle, compatible with Home Assistant and Zigbee2MQTT.

2. Package Contents

Please check the box for the following items:

  • 1x AVATTO Zigbee 3.0 PoE Dongle (GW90-POE-Ti)
  • 2x 5dBi Antennas
  • 1x USB Type-C Cable
  • 1x Mounting Bracket
  • Screws for mounting
  • 1x User Manual (this document and PDF reference)
Image showing the contents of the AVATTO Zigbee 3.0 PoE Dongle package, including the dongle, antennas, USB cable, mounting bracket, and screws.
Contents included in the product package.

3. Specifications

Feature Detail
Model Number GW90-POE-Ti
Brand Name AVATTO
Supported Platform Home Assistant
Chipset ESP32 + CC2652P
Antenna Dual 5dBi rotatable high-gain antennas (360° rotation capability)
Network Interface Type RJ45 (Gigabit Ethernet port)
Power Input (Type-C) 5V — 1A
Power Input (PoE) 48V — 0.25A
Working Temperature -10°C to 60°C
Dimensions (L*W*H) 157mm * 45mm * 131mm (with antennas)
EU LVD Voltage Low voltage: Below 50Vac or 75Vdc
High-concerned chemical None
Certification CE
Diagram showing the dimensions of the AVATTO Zigbee 3.0 PoE Dongle and its ports.
Product dimensions and port layout.

4. Setup Guide

4.1. Antenna Installation

Attach the two 5dBi antennas to the designated connectors on the dongle. The antennas are rotatable 360 degrees and can be adjusted 90 degrees for optimal signal reception.

Diagram illustrating the adjustable antennas of the AVATTO Zigbee 3.0 PoE Dongle, showing 360-degree and 90-degree rotation capabilities.
Adjustable antennas for optimal signal coverage.

4.2. Power Supply

The dongle can be powered in two ways:

  • Power over Ethernet (PoE): Connect an Ethernet cable from a PoE-enabled router or switch to the RJ45 port on the dongle. Ensure your network equipment supports PoE power supply. If not, a separate PoE power supply module will be required.
  • USB Type-C: If PoE is not available or preferred, use the included USB Type-C cable to connect the dongle to a 5V/1A USB power adapter (not included) or a computer's USB port.
Detailed view of the dongle's ports, including Type-C and RJ45 (PoE), with a note on PoE power requirements.
Powering the device via PoE or Type-C.

4.3. Network Connection Methods

The dongle supports multiple network connection types:

  • Ethernet Connection (PoE Powered): Connect a network cable to the RJ45 port for a stable and reliable network signal.
  • WiFi Connection: The device can establish a stable WiFi network connection, allowing flexible placement anywhere in your home.
  • USB Connection: Connect the dongle directly to a Home Assistant Box or computer using the included USB Type-C cable to use it as a USB dongle.
Illustrations of Ethernet, WiFi, and USB connection methods for the AVATTO Zigbee 3.0 PoE Dongle.
Available network connection methods.

4.4. Device Installation (Physical)

The dongle can be placed on a desktop or mounted:

  • Desktop Placement: For desktop use, double-sided tape can be used to secure the device.
  • Mounted Installation: Use the provided screws to secure the mounting bracket, then attach the dongle to the bracket.

4.5. Accessing the Web Console

Once the device is connected to your network (Ethernet or WiFi), open a web browser on a device within the same Local Area Network (LAN). Enter http://avatto-gw90-ti.local in the address bar to access the web console. Follow the on-screen instructions to configure the dongle for ZHA or Z2M. A password must be set during the first access for security.

5. Operating the Dongle

The AVATTO Zigbee 3.0 PoE Dongle acts as a coordinator for your smart home network, allowing you to integrate and control various Zigbee devices. It is primarily designed for use with Home Assistant, Zigbee2MQTT, and iobroker.

Diagram showing the AVATTO Zigbee 3.0 PoE Dongle's compatibility with Home Assistant, Zigbee2MQTT, and iobroker, and its role in connecting various Zigbee devices.
The dongle as a central gateway for Zigbee devices.

It is compatible with various Home Assistant host devices, including Home Assistant Green, Home Assistant Yellow, Raspberry Pi, AVATTO HA70, and AVATTO HA80.

Image showing various application scenarios and compatible host devices like Home Assistant Green, Home Assistant Yellow, Raspberry Pi, AVATTO HA70, and AVATTO HA80.
Application scenarios and compatible host devices.

You can monitor and control the dongle via a computer or mobile phone using its web interface.

6. Maintenance

6.1. Firmware Updates

Firmware updates for the AVATTO Zigbee 3.0 PoE Dongle are performed directly through its web interface. Regularly checking for and applying updates is recommended to ensure optimal performance and security.

6.2. Cleaning

To clean the device, use a soft, dry cloth. Do not use liquid cleaners or aerosol sprays, as these may damage the device.

7. Troubleshooting

  • Device not powering on: Ensure the power source (PoE or Type-C) is correctly connected and providing adequate power (5V/1A for Type-C, 48V/0.25A for PoE). Verify that your PoE switch/router supports PoE if using that method.
  • Cannot access web console: Ensure the device is connected to the same LAN as the computer/mobile device you are using. Double-check the URL http://avatto-gw90-ti.local for typos. Restart the dongle and your network equipment if necessary.
  • Zigbee devices not connecting: Verify that the dongle is configured correctly as a coordinator in your smart home platform (Home Assistant, Z2M, ZHA). Ensure Zigbee devices are within range and in pairing mode.
  • Poor signal strength: Adjust the position and angle of the dual 5dBi antennas for optimal signal coverage.

8. User Tips

  • The dongle works seamlessly with Home Assistant, providing a robust smart home experience.
  • Note that this device is specifically designed for Home Assistant, Zigbee2MQTT, and ZHA ecosystems and is not compatible with Tuya.

9. Frequently Asked Questions (FAQ)

Q: What smart home platforms are supported?
A: The AVATTO Zigbee 3.0 PoE Dongle is compatible with Home Assistant, Zigbee2MQTT, and iobroker.
Q: How do I update the firmware?
A: Firmware updates are performed directly through the device's web interface. Access it via http://avatto-gw90-ti.local.
Q: Can I use this dongle with Tuya?
A: No, this device is not compatible with the Tuya smart home platform.
Q: What are the power options?
A: The dongle can be powered via Power over Ethernet (PoE) through its RJ45 port or via a USB Type-C cable.

10. Warranty and Support

For detailed product information, additional guides, and firmware files, please visit the official AVATTO website:

https://www.avattosmart.com

To access the specific manual and firmware for the GW90-POE-Ti model:

  1. Visit https://www.avattosmart.com
  2. Navigate to the "Home Assistant Dongle" section and locate the GW90-POE-Ti model.
  3. Click "Learn More" and scroll to the bottom of the page.
  4. Select "Enter" under Technical Support to view setup instructions and download firmware/updates.

If you have any further questions or require technical assistance, please contact AVATTO support at:

Email: happiness993@outlook.com

A user manual in PDF format is also available for download from the official website.

11. Safety Information

WARNING:

  • This product is not a toy and is not intended for use by children. For adult use only.
  • The appliance is suitable for moderate climates only.
  • Ventilation must not be impaired by covering the appliance with items such as newspapers, tablecloths, curtains, etc.
  • Naked flame sources, such as lit candles, must not be placed on the appliance.

This device complies with CE standards.

© 2023 AVATTO. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.