SHOVIA D1S D2S D3S D4S D8S

Contents

Instruction Manual for SHOVIA D-Series LED Car Headlights

1. Product Overview

The SHOVIA D-Series LED Car Headlight is specifically designed to replace traditional xenon (HID) headlights. This product is compatible with D1S, D2S, D3S, D4S, and D8S series bulbs and supports universal 12V/24V vehicle voltage. Featuring CANBUS error-free technology, it ensures a seamless Plug&Play installation without complex modifications or decoding. With an ultra-high brightness of 2,000,000LM and 1800W high-power light-emitting chips, these headlights provide uniform, soft light with strong penetration, significantly improving driving visibility at night, in rain, or fog. The design prioritizes energy efficiency, low consumption, and a long lifespan, making it a reliable upgrade for various vehicle models to enhance driving safety.

Key Features:

  • Ultra-High Brightness & Clear Vision: 2,000,000LM high-power lighting with strong penetration for improved night driving clarity.
  • CANBUS Error-Free & Strong Compatibility: Built-in CANBUS module prevents fault codes and flickering on over 98% of mainstream vehicle models.
  • Plug&Play & Easy Installation: Designed for direct replacement of original xenon bulbs, requiring no wire cutting or decoding.
  • Energy-Saving & Long-Lasting: Reduces energy consumption by over 30% compared to xenon lamps, with a lifespan of over 50,000 hours.
  • Xenon Replacement & Upgrade: Offers higher luminous efficiency and lower heat generation, eliminating slow startup and delay issues common with xenon lamps.
  • Stable Heat Dissipation & Reliable Safety: Equipped with an efficient heat dissipation structure and a 12000 RPM hydraulic industrial fan for stable operation in extreme temperatures.
  • IP68 Waterproof & Dust-Proof: Fully sealed design ensures reliable performance in various weather conditions.
  • Sharp Cut-off Line: Newly upgraded light focusing technology provides a sharp and clear cut-off line, preventing glare for oncoming vehicles.
  • 0.01S High-Speed Start: Instantaneous illumination for immediate brightness and safety.

2. Specifications

Parameter Name Specific Specifications
Product Model D1S, D2S, D3S, D4S, D8S
Product Type Car LED Headlight (Replaces Xenon HID)
Brand Name SHOVIA
Brightness 2,000,000LM Super Bright
Wattage 1800W High Power
Working Voltage 12V/24V Universal (Compatible with Passenger Cars and Commercial Vehicles)
Color Temperature 6000K White Light
Core Technology CANBUS Error-Free Technology (Anti-Flicker)
Installation Method Plug&Play - no wire cutting or decoding required
Service Life ≥50,000 Hours
Product Material Aviation Aluminum
Waterproof Rating IP68
Cooling Method Extra large copper alloy body cooling + double ball fan cooling (12000 RPM Hydraulic Industrial Fan)
Applicable Ambient Temperature -45℃ to 150℃ (-49°F to 302°F)
Size 1:1 Original Xenon Bulb Perfect Fit (Ultra-thin 1mm body)
Certification E-Mark, CE

For more detailed dimensions, please refer to the diagram below or consult customer service.

Series Dimension Diagram for D2S/R D4S/R and D1S/R D3S/R D8S/R LED bulbs
Figure 2.1: Series Dimension Diagram. Shows dimensions for D2S/R D4S/R (14mm width, 40mm height, 70mm total length) and D1S/R D3S/R D8S/R (13mm width, 40mm height, 70mm total length).

3. Installation

The SHOVIA D-Series LED Headlights feature a Plug&Play design for easy installation, typically completed within 5-10 minutes without the need for professional tools or wire cutting.

Installation Steps:

  1. Preparation Before Installation:
    • Turn off the vehicle engine and all lights.
    • Allow the original headlights to cool down completely to avoid high-temperature burns.
    • Prepare the new LED headlight product and any necessary tools (or use your hands).
  2. Remove the Original Headlight:
    • Open the vehicle hood.
    • Locate the original xenon headlight connector.
    • Squeeze the connector clip and gently pull out the original headlight plug.
    • Remove the original xenon headlight bulb.
  3. Install the New LED Headlight:
    • Align the new LED headlight product with the original headlight mounting position.
    • Gently push it in to ensure a secure fit.
    • Align the product plug with the original vehicle connector, insert it firmly, and fasten the clip to ensure good contact. (No wire cutting or additional wiring is required).
  4. Adjust the Light:
    • Start the vehicle.
    • Turn on both the low and high beams to check if the lights illuminate normally without flickering or fault codes.
    • If the light beam is misaligned, fine-tune the height using the headlight adjustment knob until it meets your driving needs.
  5. Installation Completed:
    • After confirming that the lights work normally and are securely installed, organize any loose wires.
    • Close the hood. The product is now ready for use.
10 Minute Easy Plug-and-Play Installation Steps
Figure 3.1: Visual guide for the 10-minute Plug-and-Play installation process, showing alignment, insertion, and connection steps.
Plug & Play Easy Install Diagram
Figure 3.2: Diagram illustrating the simple Plug & Play connection for D1/D3 and D2/D4 series bulbs, emphasizing no wire breaking.

4. Operation

The SHOVIA D-Series LED Headlights are designed for optimal performance and safety. Once installed, they provide superior illumination compared to traditional HID or halogen lamps.

Using Your Headlights:

  • Instant Brightness: The LED bulbs achieve full brightness in 0.01 seconds, eliminating the warm-up delay associated with HID lights.
  • Beam Patterns: Utilize both low beam for concentrated, safer illumination in normal driving conditions and high beam for long-range, ultra-bright spotlight coverage when needed.
  • Anti-Glare Technology: The newly upgraded light focusing technology provides a sharp and clear cut-off line, significantly reducing glare for oncoming vehicles and enhancing overall driving safety.
  • Uniform Light Distribution: The 360° uniform light design ensures no dark spots or shadowed areas, providing consistent and safe illumination.
Light Beam Effect Comparison: Low Beam vs. High Beam
Figure 4.1: Comparison of low beam (concentrated, safer) and high beam (long range, ultra bright, wide coverage) effects.
Perfect Beam Pattern: Our LED vs. Other LED
Figure 4.2: Illustrates the superior 6000K 'further' beam pattern of SHOVIA LED compared to a narrower 5000K 'other LED'.
No Blinding Oncoming Vehicles with SHOVIA LED Headlights
Figure 4.3: Demonstrates the sharp cut-off line technology that prevents blinding oncoming vehicles, enhancing safety.
0.01S High Speed Start Comparison LED vs HID
Figure 4.4: Comparison showing the 0.01s instant start of SHOVIA LED headlights versus the slow 5-second warm-up of HID lights.
Video 4.1: Product demonstration showcasing the LED bulbs, their waterproof capabilities, and on-road lighting performance.

5. Maintenance

Proper maintenance ensures the longevity and optimal performance of your SHOVIA D-Series LED Headlights.

General Care:

  • Handling: Always handle the product with care. Avoid colliding with or squeezing the lamp body, as this can damage the light-emitting chips and the heat dissipation structure.
  • Cleaning: Periodically clean any dust or debris from the heat dissipation structure to maintain efficient cooling.
  • Storage: If storing the product, keep it in a dry, ventilated, and cool place. Avoid moisture, high temperatures, and direct sunlight to prevent damage.
  • Waterproof Design: The IP68 waterproof and dust-proof grade ensures the bulbs are protected against water and dust ingress, making them suitable for all weather conditions.
IP68 Defensive Waterproof Test
Figure 5.1: Illustrates the IP68 waterproof rating, showing the LED bulb submerged in water and functioning, suitable for rainy, foggy, and snowy conditions.

6. Troubleshooting

If you encounter any issues with your SHOVIA D-Series LED Headlights, refer to the table below for common faults and their solutions.

Common Faults Possible Causes Solutions
Lights Not Turning On
  • Loose plug connection
  • Abnormal vehicle voltage
  • Damaged product connector
  • Reconnect the plug and ensure the clip is securely fastened.
  • Check the vehicle battery voltage.
  • Contact customer service to replace the product if damaged.
Light Flickering & On-Board Computer Error
  • CANBUS module incompatibility with the vehicle model
  • Poor wire contact
  • Contact customer service to obtain a special decoder if needed.
  • Check the plug connection and reconnect if necessary.
Insufficient Light Brightness & Deviation
  • Improper installation
  • Unadjusted light height
  • Stains on the lampshade
  • Reinstall the lamp body to ensure it is securely fixed.
  • Fine-tune the height using the headlight adjustment knob.
  • Clean stains from the lampshade.
Lamp Body Overheating & Odor
  • Clogged heat dissipation structure
  • Excessively high vehicle voltage
  • Product quality issues
  • Turn off the lights and clean dust from the heat dissipation structure.
  • Check the vehicle voltage.
  • Stop using the product immediately and contact customer service for after-sales support.

7. User Tips

  • Always ensure your vehicle's original HID ballast is working correctly for optimal performance of these LED bulbs.
  • When installing, confirm the correct headlight model (D1S/D2S/D3S/D4S/D8S) to avoid compatibility issues.
  • For certain special vehicle models (e.g., niche imported cars or those with modified on-board computers), minor errors might occur. In such cases, contact customer service for a special decoder.
  • Exercise caution when using high beams at night. Avoid directly shining the light on pedestrians or oncoming vehicles to prevent blinding. Always comply with traffic rules.
  • While the product is designed for efficient heat dissipation, it will generate slight heat during operation. Avoid touching the heat dissipation area with bare hands to prevent burns.

8. Warranty & Support

Warranty Instructions:

  • This product comes with a 12-month warranty, calculated from the date of receipt.
  • If the product experiences non-human-induced quality issues within the warranty period, please contact the seller for free repair or replacement.
  • Warranty Exclusions: The warranty does not cover the following situations:
    • Man-made damage (e.g., collision, extrusion, unauthorized disassembly, modification).
    • Damage caused by improper installation.
    • Damage caused by abnormal voltage.
    • Damage caused by force majeure (e.g., fire, flood).
  • For any repair or replacement claims within the warranty period, you will need to provide product photos and order information to assist the seller in verifying the issue.

Customer Support:

This product is specially designed for vehicle lighting and is intended solely for this purpose. If you have any questions or encounter issues during use, please contact the seller's customer service promptly. They will provide a solution as soon as possible.

A detailed user manual in PDF format is also available for download. Please refer to the product page for the link to the PDF document.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.