Focabo HY300 Pro

Contents

FOCABO Projector HY300 Pro User Manual

Model: HY300 Pro | Brand: Focabo

1. Introduction and Safety Information

Thank you for purchasing the FOCABO Projector HY300 Pro. This manual provides essential information for setting up, operating, and maintaining your projector. Please read it thoroughly before use and keep it for future reference.

1.1 Important Safety Instructions

  • Please read this manual carefully before use and keep it for future reference.
  • The projector is not dustproof or waterproof.
  • In order to reduce the risk of fire and electric shock, do not expose the projector to rain and fog.
  • Please use the original power adapter. The projector should work under specified rated power supply.
  • When the projector is working, please do not look directly into the lens. The strong light can cause eye strain or slight pain. Children should use the projector under the supervision of adults.
  • Do not cover the vents of the projector. Overheating will reduce the life of the projector and may cause damage.
  • Regularly clean projector vents, as dust may cause cooling malfunction.
  • Do not use the projector in greasy, damp, dusty, or smoky environments. Oil or chemicals will cause malfunction.
  • Please handle with care during daily use.
  • Please cut off the power if the projector is out of use for a long time.
  • Non-professionals are forbidden to disassemble the projector for testing and maintenance.
  • Please consult qualified personnel for installation and repair services, and do not use damaged wires, accessories, and other peripherals.
  • The projector should be kept away from flammable, explosive, strong electromagnetic interference (e.g., large radar stations, power stations, substations). Avoid direct sunlight and strong ambient light.
  • Do not bend or drag the power cord.
  • Do not place the power cord under the projector or any heavy objects.
  • Do not cover the power cord with other soft materials.
  • Do not heat the power cord.
  • Avoid touching the power adapter with wet hands.

2. Package Contents

Upon opening the package, please verify that all items listed below are present and in good condition:

Video: Unboxing the FOCABO Projector HY300 Pro, showing the projector unit, remote control, power cable, and user manual.

  • FOCABO Projector HY300 Pro Unit
  • Remote Control
  • Power Cable
  • Quick Installation Guide (User Manual)

3. Specifications

Feature Specification
Brand NameFocabo
TypeDigital Projector
UseHome
Home Theater ProjectorYes
Projection TechnologyLCD
Optical Resolution1280x720dpi
Brightness8000 Lumens
Ansi Lumens260
Contrast Ratio1000:1-2000:1
Projected Dimension40-300 inches
Projection Distance1-10 meters
Screen Scale4:3/16:9
Keystone CorrectionAuto Correction
Input/OutputHDMI, TF
Power SourceDC
Power (W)39
Weight0.38kg
BatteryYes
Bluetooth-compatibleYes (BT5.0)
Built-in SpeakerNo
Remote controller includedYes
Inbox adaptorYes
Light SourceLED
Projective ModeT4
FunctionVideo Playback, Others
StructureWithout display device
OriginMainland China
CertificationCE
Voltage rangeHigh voltage (50-1000V DC, 75-1000V AC)
High-concerned chemicalNone

4. Initial Setup

4.1 Power Connection

Connect the provided power cable to the projector's power input port and then plug the adapter into a suitable power outlet.

4.2 Power ON/OFF

  • Power On: Long press the power button on the projector or the remote control for 3 seconds.
  • Power Off: When the projector is powered on, press and hold the power button on the projector or the remote control for 3 seconds to power off.

4.3 Focus Adjustment

When the projector is on, adjust the sharpness of the image by rotating the focus wheel located on the back of the projector.

4.4 Keystone Correction

The projector features automatic keystone correction. Ensure the projector is placed on a stable, level surface for optimal results.

Projector with Auto Keystone correction feature highlighted

Image: The projector supports Auto Keystone correction for easy setup.

4.5 OSD Language Setting

To choose your preferred language for the On-Screen Display (OSD):

  1. Go to Settings.
  2. Select System Settings.
  3. Choose OSD Lang.

5. Operating Instructions

5.1 Launcher UI

The projector runs on Android 11 and features a user-friendly interface for accessing apps and settings.

Launcher UI showing various app icons like YouTube, Spotify, HBO Max, Apple TV, Prime Video, Netflix

Image: The projector's Launcher UI with popular streaming apps.

5.2 Home Background

To customize the home screen background:

  1. Go to Settings.
  2. Select System Settings.
  3. Choose Home Background and select your desired option (Blue, Dark blue, White, Grey).

5.3 Media Player (USB)

To play local media files from a USB drive:

  1. Insert your U disk into the USB port on the projector.
  2. Click the USB icon on the homepage to access and play local video, music, photos, or e-books.

5.4 Wired Screen Mirroring

5.4.1 For iPhone (iOS devices)

  1. Connect your iPhone to the projector via the original iPhone charging cable (a cable with a USB port and Lightning port).
  2. When your iPhone displays a pop-up window, click 'Trust'.
  3. Enter your device password if prompted.

5.4.2 For Android Phones

  1. Connect your Android phone to the projector via the original Android phone cable (the data cable must have a USB port and be connected to a computer to read the contents of the phone).
  2. Install the APK required for screen mirroring according to the prompt, or scan the two-dimensional code on the projector screen interface to download and install.
  3. After the APK is successfully installed, the screen mirroring function can be realized.
  4. Note: When Android phones are on the same screen, the sound will come from the phone, not the projector.

5.5 HDMI Signal Input

To connect an external device (e.g., laptop, gaming console) via HDMI:

  1. Connect the external sourcing device to the projector using an HDMI cable.
  2. Enter HDMI on the projector's homepage. The signal from the sourcing device will be transmitted to the projector and cast out.

5.6 Projector Mode

To select different projection modes based on your setup:

  1. Go to Settings.
  2. Select System Settings.
  3. Choose Flip to select your desired mode: Front Table, Front Ceiling, Back Table, Back Ceiling.

5.7 Image Mode

To select a different image mode according to your application scenario:

  1. Go to Settings.
  2. Select Picture Settings.
  3. Choose Image Mode. Four modes are available: Standard, Dynamic, Mild, and User.

5.8 Color Temperature

To adjust the color temperature of the projection:

  1. Go to Settings.
  2. Select Picture Settings.
  3. Choose Color Temperature. Three modes are available: Cold, Standard, and Warm.

6. Maintenance

  • Cleaning: Regularly clean the projector vents to prevent dust buildup, which can cause cooling malfunctions. Use a soft, dry cloth for cleaning the exterior.
  • Environment: Keep the projector away from greasy, damp, dusty, smoky environments, and avoid contact with oil or chemicals.
  • Handling: Always handle the projector with care to prevent damage.
  • Storage: If the projector will not be used for an extended period, cut off the power and store it in a cool, dry place.

7. Troubleshooting

Problem Possible Solution
Projector does not power on
  • Ensure the power cable is securely connected to the projector and a working power outlet.
  • Verify that the original power adapter is being used.
  • Press and hold the power button on the projector or remote for 3 seconds.
No image or signal displayed
  • If using HDMI, ensure the HDMI cable is connected correctly and the projector's input source is set to HDMI.
  • For wired screen mirroring, check the connection cable and ensure any required apps are installed and permissions granted.
Image is blurry or out of focus
  • Rotate the focus wheel on the back of the projector to adjust sharpness.
  • Ensure the projector is placed within the recommended projection distance (1-10 meters).
Image is distorted (e.g., trapezoidal)
  • The projector has auto keystone correction. Ensure it is placed on a stable, level surface.
Projector is overheating
  • Ensure the projector's ventilation vents are not blocked or covered.
  • Clean any dust from the vents regularly.
  • Operate the projector in a well-ventilated area.
No sound from projector
  • Check the volume settings on the projector and the connected source device.
  • If using wired Android screen mirroring, note that sound typically comes from the phone, not the projector.
  • The projector does not have a built-in speaker, external audio output is required.
Remote control not working
  • Ensure there are fresh batteries in the remote control.
  • Check for any obstructions between the remote and the projector's IR receiver.

8. User Tips

No specific user tips from reviews or Q&A were available for this product at the time of manual creation.

9. Warranty and Support

This manual is for reference only. The pictures and functions described herein are subject to the actual product. The manufacturer is constantly working to improve product performance and reserves the right to modify product functions and interface without prior notice.

For further assistance, detailed information, or to download the complete user manual, please refer to the official PDF document:

View User Manual (PDF)

© 2024 Focabo. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.