Boost 10132400859

Contents

Boost Solar Charge Controller MPPT Solar Panel Regulator User Manual

Model: 10132400859

Brand: Boost

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Boost Solar Charge Controller MPPT Solar Panel Regulator. This device is designed to efficiently charge 24V to 72V batteries in various electric vehicles and solar system kits using solar panels. Please read this manual thoroughly before use to ensure proper functionality and safety.

2. Safety Information

  • WARNING: To avoid danger of suffocation, keep this plastic bag away from babies and children.
  • Always ensure proper ventilation around the controller.
  • Do not attempt to disassemble or repair the controller yourself. Contact qualified personnel for service.
  • Ensure all connections are secure and correctly polarized to prevent damage to the controller, batteries, and other connected devices.
  • Install appropriate circuit breakers for both battery and photovoltaic input circuits as specified in the wiring procedure.

3. Product Overview

The Boost MPPT Solar Charge Controller is an advanced device utilizing Maximum Power Point Tracking (MPPT) technology to optimize power extraction from solar panels. It is suitable for a wide range of battery types and applications, particularly in electric vehicles and off-grid solar systems.

3.1 Key Features

  • Efficient Charging: Innovative MPPT technology with up to 99% tracking efficiency and 98% peak conversion efficiency, reducing power consumption and operating temperatures.
  • Multiple Electronic Guards: Integrated protection mechanisms including overcharge, short circuit, and reverse current protection to safeguard devices and batteries.
  • Lithium Battery Compatibility: Supports lithium-ion batteries with adaptive charging cycle settings. Includes a feature to activate protected lithium batteries using solar panel energy.
  • Wide Application: Ideal for electric cars, carts, scooters, tricycles, and other electric vehicles, compatible with sealed, gel, FLD acid, and ternary lithium batteries.
  • Multifunctional Boost: Boosts voltage from 15V-60V solar panels to charge 24V-72V batteries, especially useful when PV input voltage is lower than battery voltage.

3.2 Components

Front view of the Boost Solar Charge Controller with display and control buttons.
Figure 1: Front view of the Boost Solar Charge Controller, showing the display and control buttons (PRG/ESC, Up, Down, ENTER).
Side view of the Boost Solar Charge Controller, showing mounting brackets.
Figure 2: Side view of the controller, highlighting its compact design and mounting points.

4. Specifications

Parameter Value
Product Name Boost Solar Charge Controller MPPT Solar Panel Regulator
Model 10132400859
Batch/Serial Number ALI5205612677
Input Voltage (Battery) 24V, 36V, 48V, 60V, 72V
Rated Charging Current 10A
Charging Technology MPPT
Charging Algorithm 3 Stages
Battery Voltage Range 20-88V
Operating Temperature Range -35°C to 65°C
Humidity Range 95% (non-condensing)
Material ABS, Aluminium Alloy
Dimensions (L x W x H) 140mm x 50mm x 85mm (approx. 5.51in x 1.97in x 3.35in)
Package Weight 0.42 kg
Dimensions of the Boost Solar Charge Controller: 140mm length, 50mm width, 85mm height.
Figure 3: Product dimensions.

5. Setup and Installation

Follow these steps carefully for safe and correct installation of the solar charge controller.

5.1 Wiring Procedure

  1. Battery Connection: Prioritize connecting the battery module before connecting the photovoltaic array. Install a separate DC circuit breaker for the battery charging circuit.
  2. Photovoltaic Connection: After confirming that the configured photovoltaic array voltage is within the acceptable range of the controller, connect the photovoltaic array. Install a separate DC circuit breaker on the photovoltaic input circuit.
  3. Controller Startup: After completing the connection of the battery and photovoltaic array, check for reverse or loose connections in the cables. Once confirmed, sequentially close the circuit breakers for the battery charging circuit and photovoltaic input circuit to start the controller.
Wiring diagram for the Boost Solar Charge Controller, showing connections for PV Array, Breaker, Controller, Fuse, Battery (36V/48V), and AC output to Inverter.
Figure 4: Detailed wiring diagram for the solar charge controller. Ensure all components are connected as shown, with appropriate circuit breakers and fuses.

Note: The diagram illustrates a typical setup. Ensure your solar panel system voltage (15V to 60V) and battery bank voltage (24V to 72V) are compatible with the controller's specifications.

Diagram showing a 15V to 60V solar panel system connected to the 10A MPPT Boost Solar Charge Controller, which then charges a 24V to 72V battery bank.
Figure 5: Connection overview from solar panels to battery bank via the controller.

6. Operating Instructions

Once the controller is properly installed and powered on, it will automatically begin operating. The display provides real-time information about the charging process.

6.1 Display and Controls

Close-up of the Boost Solar Charge Controller display showing solar panel voltage (24.8V) and battery voltage (47.1V), along with charging indicators.
Figure 6: Controller display showing real-time charging data.

The display shows key parameters such as solar panel voltage and battery voltage. Use the PRG/ESC, Up, Down, and ENTER buttons to navigate menus and adjust settings if available. Refer to the full PDF manual for detailed menu navigation.

6.2 Battery Type Configuration

The controller is compatible with various battery types. If using lithium-ion batteries, ensure the battery type parameter is correctly set in the controller's settings. This will adjust the charging cycle accordingly.

Diagram illustrating Lithium Battery Activation, showing compatibility with Gel, FLD, AGM, LiFePO4, Sealed, and Lead-acid batteries. Text explains that the controller activates protected lithium batteries using solar energy.
Figure 7: Battery compatibility and Lithium Battery Activation feature.

When a connected lithium battery is in a protected state, the controller will use energy from the solar panel to activate it, ensuring the current does not exceed the battery's protective voltage and current range.

7. Maintenance

  • Regularly check all wiring connections for tightness and corrosion.
  • Keep the controller clean and free from dust and debris. Use a dry cloth for cleaning.
  • Ensure adequate ventilation around the controller to prevent overheating.
  • Inspect the solar panels and batteries periodically for any signs of damage or wear.
  • Do not expose the controller to water or excessive moisture.

8. Troubleshooting

This section provides solutions to common issues you might encounter.

Problem Possible Cause Solution
Controller not powering on Loose battery connection, faulty wiring, discharged battery. Check battery connections and polarity. Ensure battery has sufficient charge. Verify circuit breakers are closed.
No charging from solar panels PV array not connected, low solar input voltage, faulty solar panel. Check PV array connections and circuit breaker. Ensure sufficient sunlight. Verify PV array voltage is within acceptable range (15V-60V).
Battery not charging fully Incorrect battery type setting, undersized solar array, battery degradation. Verify battery type setting. Ensure solar array size matches battery capacity. Consider battery health check.
Overheating Insufficient ventilation, excessive load. Ensure controller has adequate airflow. Reduce load if possible.
Diagram illustrating multiple protection functions of the controller: Protection against overheating, limit maximum charging current, protection against output short circuit, and protection against reverse polarity connection.
Figure 8: Built-in protection features of the controller.

9. User Tips

  • For optimal performance, ensure your solar panels are clean and free from obstructions.
  • Periodically monitor the display to ensure consistent charging and healthy battery voltage.
  • When connecting to electric vehicles, ensure the controller is securely mounted to prevent vibrations from affecting connections.
  • If using lithium batteries, double-check the controller's settings to match the specific lithium battery chemistry for proper charging profiles.

10. Manufacturer and Support Information

Manufacturer:

  • Company Name: Wenzhou Liyu Electric Co., Ltd
  • Full Address: Wuchang Road, Tong'er Village, Tongqin Town, Wuyi County, Jinhua City, Zhejiang Province, China
  • Email: 123456@qq.com
  • Telephone: 48-758496353

EU Authorized Representative:

  • AR Company Name: Nenninger GmbH
  • Full Address: Friedrichstr. 95, 10117 Berlin, Germany
  • Email: nenningerde@gmail.com
  • Telephone: 49-12345678910

For further assistance or technical support, please contact the manufacturer or your local distributor.

A detailed user manual in PDF format can be found at: User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.