1. Introduction
The iManAuto Wireless CarPlay Android Auto Module (Model: CX-ADM12) is designed to upgrade your Audi's MIB infotainment system with modern smartphone integration. This module enables Wireless CarPlay and Android Auto functionalities, allowing seamless access to navigation, music, calls, and voice control directly through your car's display. It also supports AirPlay, Mirror Link, and reversing camera input for an enhanced driving experience.

2. Compatibility
This module is compatible with specific Audi models equipped with the MIB system. Please verify your car's model year and screen size before installation.
- For Audi A3/S3 (2014-2018) with 5.8" or 7" screen.
- For Audi A4L/A5 (2017-2018) with 7" or 8.3" screen.
- For Audi Q2L/Q5L (2018) with 7" or 8.3" screen.
- For Audi Q7 (2016-2018) with 7" or 8.3" screen.
Important Note: Original car models with touch screens are NOT compatible.
It is highly recommended to send a picture of your original dashboard to the seller for confirmation of compatibility before proceeding with installation.

3. Specifications
| Feature | Detail |
|---|---|
| Din Size | One Din |
| Operating System | Linux |
| Voltage | 12 V |
| Item Weight | 1 kg |
| Digital Media Format | CD (Note: This refers to the original system's capability, not the module's direct media playback.) |
| Display Size Support | 5", 7", 8" |
| Origin | Mainland China |
| Certification | CE |
| Package Dimensions (L x W x H) | 26 cm x 16 cm x 10 cm |

4. Setup and Installation
This section provides detailed instructions for installing and setting up your iManAuto module. For a visual guide, please refer to the installation video below and the wiring diagrams.
4.1. Pre-Installation Check
Before starting, ensure your vehicle's MIB system version and screen size are compatible. You may need to access your car's system information to verify this.



4.2. DIP Switch Settings
The module features DIP switches to configure it for your specific Audi model and screen size. Refer to the table within the wiring diagram image to set the switches correctly.

Example: For an Audi A3 with a 7-inch screen, set DIP switches as follows: 1-OFF, 2-OFF, 3-OFF, 4-ON.
4.3. Wiring Connections
Carefully follow the wiring diagram to connect the module to your car's MIB system. Ensure all connections are secure.

Refer to Figure 5 for the detailed wiring diagram.
- Connect the original 48PIN harness to the module.
- Connect the OEM LVDS cable to the module's LVDS port.
- Connect the module's LVDS cable to the OEM Radio.
- Connect the USB cable for media and updates.
- Connect the rear-camera input (if applicable).
- Connect the cam-power cable (if applicable).
- Connect the MIC for voice commands.
- Attach the WIFI cable.
4.4. Reversing Camera Wiring
- cam-power: Connect to the camera power supply.
- rear-cvbs: Connect to the camera video input.
The smart module can decode video and supports both original car reversing cameras and aftermarket AHD 720p cameras.

4.5. Initial Power-On and System Access
After all connections are made, power on your car. To switch to the CarPlay/Android Auto system, long-press the 'BACK' button on your car's MMI control panel.

5. Operating Instructions
5.1. Wireless CarPlay / Android Auto Connection
To connect your smartphone wirelessly:
- On your phone, enable Wi-Fi and Bluetooth.
- On the car's display (after switching to the module's interface), navigate to "Wireless CarPlay Settings" or "Wireless Android Auto Settings".
- Select "Discover and connect devices".
- On your phone, search for Bluetooth devices and connect to the device named "CX_BTXXXX" (where XXXX is a unique identifier).
- Confirm the pairing code on both devices.
- Allow contacts and favorites sync if prompted.
- CarPlay or Android Auto should now automatically connect.

5.2. Audio Settings
Access the Audio Settings within the module's interface to adjust sound preferences.
- Volume: Adjust the overall audio output.
- MIC Sensitivity: Control the microphone's sensitivity for voice commands.
- EQ: Equalizer settings for audio customization.
- Original MIC: Ensure this is ON to use your car's built-in microphone.
- Use the original Bluetooth Audio: Set to ON if your car has Bluetooth phone functionality (no need for an additional microphone).
- Automatic echo cancellation: Enable for clearer audio during calls.
To use the module's audio, ensure your car's original multimedia system is set to an external audio input, such as AUX or Bluetooth audio playback from your phone.

5.3. General Operation
- Navigation: Use your preferred navigation apps (e.g., Apple Maps, Google Maps) via CarPlay/Android Auto.
- Music: Stream music from your phone's apps.
- Calls: Make and receive calls using the integrated system.
- Voice Control: Utilize Siri or Google Assistant for hands-free operation.
- AirPlay/Mirror Link: Mirror your phone's screen to the car display for compatible apps.

6. Maintenance
To ensure the longevity and optimal performance of your iManAuto module:
- Keep the module and connections free from dust and moisture.
- Avoid exposing the module to extreme temperatures.
- Do not attempt to open or modify the module, as this will void the warranty.
7. Troubleshooting
If you encounter any issues with your iManAuto module, please consider the following general steps:
- No display/No signal: Check all wiring connections, especially the LVDS cables. Ensure the DIP switches are set correctly for your car model and screen size.
- Audio issues: Verify your car's original multimedia system is set to the correct external audio input (AUX/Bluetooth). Check the module's audio settings.
- Connection problems (CarPlay/Android Auto): Ensure your phone's Wi-Fi and Bluetooth are enabled. Try forgetting the Bluetooth device on your phone and re-pairing. Restart both your phone and the car's infotainment system.
- Module unresponsive: Try pressing the reset button on the module (if available) or disconnecting and reconnecting the power supply.
For persistent issues, please refer to the official user manual PDF or contact iManAuto customer support for assistance.
8. User Tips
- Always ensure your phone's operating system (iOS/Android) is up to date for optimal performance with CarPlay/Android Auto.
- For the best audio quality, ensure your car's original Bluetooth audio is selected as the source when using the module.
- If experiencing intermittent connectivity, try to keep your phone in a consistent location within the car, away from potential interference.
9. Warranty and Support
For warranty information, technical support, or any questions not covered in this manual, please contact the iManAuto Store directly through your purchase platform. You can also refer to the comprehensive user manual available in PDF format for more details: User Manual (PDF).
10. Video Installation & Demonstration Guide
Watch this video for a step-by-step visual guide on installing the iManAuto Wireless CarPlay Android Auto Module and a demonstration of its features.