1. Introduction
This user manual provides detailed instructions for the installation, operation, and maintenance of your Jingsha B75 Mini ITX Motherboard Combo. This kit includes a B75 motherboard, an Intel Core i3 2130 CPU, 8GB DDR3 1600MHz PC RAM, and a CPU cooler. Please read this manual thoroughly before proceeding with installation to ensure proper setup and to prevent damage to components.
2. Warning & Safety Information
- Do not use in humid environments.
- Avoid areas with strong electromagnetic interference.
- Disconnect power before installation.
- When inserting or removing hardware, take care not to damage motherboard pins.
- Prevent electrostatic discharge (ESD) damage during installation.
- Do not force insertion or removal of hardware components.
- Ensure adequate ventilation and heat dissipation for optimal performance and longevity.
3. Package Contents
The Jingsha B75 Mini ITX Motherboard Combo includes the following components:
- 1 x Jingsha B75M-I Motherboard
- 1 x Intel Core i3 2130 CPU (2 cores/4 threads, 3.4GHz, LGA 1155 socket)
- 1 x 8GB DDR3 1600MHz PC RAM module
- 1 x CPU Cooler
4. Product Overview
The Jingsha B75M-I motherboard is a Mini-ITX form factor board designed for Intel LGA1155 processors. It features a compact design with essential ports and expansion slots.
5. Specifications
Detailed specifications for the B75M-I Motherboard Combo:
| Feature | Description |
|---|---|
| Part | B75M-I Motherboard |
| Processor | Intel Socket LGA1155 CPU (Intel Core i3 2130 included) |
| Chipset | Intel B75 |
| Memory | 2*UDIMM DDR3 1066/1333/1600MHz (Base on CPU), Dual channel, Up to 16GB (8GB included) |
| Storage | 3*SATA2.0 Port, 1*SATA3.0 Port, 1*M.2 2280 NVMe x4 2.0 Port or 2280 NGFF SATA2.0 Protocol SSD Port, 1*M.2 WIFI |
| USB | 6*USB2.0 Ports, 4*USB3.0 Ports |
| LAN | 1*RTL8111F, 1000Mbps Ethernet |
| Audio | CJC6811A, 2.1 Audio Channels |
| BIOS | AMI EFI BIOS |
| Back Panel Connectors | 1*HD, 1*VGA, 4*USB2.0 Port, 2*USB3.0 Port, 1*RJ45 Lan Port, 1*Audio |
| Onboard Connectors & Header | 4pin CPU Smart FAN header, 3pin SYS FAN header, Front Audio header, USB2.0 header (for two USB2.0 ports), USB3.0 header (for two USB3.0 ports), Front control panel header, Speaker header, COM header, Power on header, Debug header, M.2 WIFI, 24pin ATX connector, 8pin 12V connector |
| Expansion Slot | 1*PCIE3.0 x16 slot |
| Form Factor | Mini-ITX 170mm*170mm |
| Quality Certification | CE |
| Application | Desktop (Audio & Video, Household, Office, Design, Video Production, Gaming) |
CPU Specifications (Intel Core i3 2130)
- Processor Series: Intel Core i3 2130 (2 cores/4 threads)
- Main frequency: 3.4GHz
- Socket type: LGA 1155
- 3rd level cache: 3MB
- Technology: 32 nm
- Power consumption: 65W
Memory Specifications (8GB DDR3 1600MHz)
- Chip: SEC / HY/ MIC /MT/and others (shipped at random)
- Type: Desktop Memory
- Frequency: DDR3 1600MHz
- Capacity: 8GB (1*8GB)
6. Setup Instructions
Follow these steps to install the components of your motherboard combo:
6.1. CPU Installation
- Open the pressure bar marked as shown in the picture.
- Open the buckle cover of the CPU base.
- When placing the CPU into the slot, pay attention to the four defenses (silent notch, gold mountain corner alignment on the CPU) and the golden corner of the motherboard. Be careful not to bend pins.
- Re-buckle the previously opened lever to secure the CPU.
6.2. Memory (RAM) Installation
- Locate the DDR3 memory slots on the motherboard.
- Open the retention clips on both ends of the memory slot.
- Align the notch on the memory module with the key in the memory slot.
- Insert the memory module firmly into the slot until the retention clips snap into place.
6.3. M.2 SSD Installation
Ensure your M.2 SSD is NVMe compatible before installation.
- Locate the M.2 slot on the motherboard.
- Insert the M.2 SSD into the slot at an angle.
- Gently push down the SSD and secure it with the provided screw to prevent it from falling off due to stress.
6.4. Power Connections
Connect the 24-pin ATX power connector and the 8-pin 12V CPU power connector from your power supply to the corresponding ports on the motherboard. Ensure all connections are secure.
6.5. CPU Cooler Installation
Install the CPU cooler onto the CPU according to the cooler's specific instructions. Ensure proper thermal paste application and secure mounting for effective heat dissipation.
6.6. Video Guide: CPU and RAM Installation
For a visual guide on installing the CPU and RAM, please watch the following video:
7. Operating Your System
After all components are correctly installed and connected, you can power on your computer. The system will typically boot into the BIOS/UEFI interface or directly to the operating system if one is already installed on your storage device. Ensure your power supply is sufficient; a minimum of 500W brand power supply is recommended for stable operation.
8. Maintenance
- Cleaning: Regularly clean dust from the motherboard and CPU cooler using compressed air to maintain optimal cooling and prevent overheating.
- Environment: Keep the system in a well-ventilated area, away from direct sunlight, heat sources, and excessive humidity.
- Component Handling: Always handle components with care, especially when upgrading or replacing parts, to avoid physical damage or electrostatic discharge.
9. Troubleshooting
9.1. Frequently Asked Questions (FAQ)
- System fails to power on: Verify that all power connections (24-pin ATX, 8-pin 12V CPU) are secure, and that the CPU and memory are properly installed.
- Blue Screen of Death (BSOD): Update the motherboard BIOS to the latest version or verify hardware compatibility for all installed components.
- Hard drive not recognized: Confirm that the SATA cable is correctly connected to both the hard drive and the motherboard. Also, check BIOS settings to ensure the drive is detected.
9.2. BIOS and Drivers
If you encounter issues or need to update your system, BIOS files and drivers for the motherboard can be obtained by contacting customer service.
10. User Tips
- Quiet Operation: The included CPU cooler is noted for its quiet operation, making this combo a good choice for users seeking a silent PC build.
- Operating System Compatibility: This motherboard combo has been successfully operated with Linux, indicating good compatibility with various operating systems.
- Power Supply: Always use a dedicated PC power supply. Ensure it meets the recommended wattage (at least 500W from a reputable brand) for stable system performance.
- CPU Warranty Label: There is a warranty label on the back of the CPU. Do not tear it off, as it is required to prove product authenticity for warranty claims. The label does not affect CPU usage.
11. Warranty and Support
The CPU included in this combo comes with a 1-year warranty from the date of purchase. For any technical support, warranty claims, or to obtain BIOS files and drivers, please contact customer service.
For additional item guides and documents, you may refer to the official PDF manual: View User Manual (PDF).