1. Safety Instructions
Please read and understand all safety instructions and the manual thoroughly before using this product. Failure to follow these instructions may result in laser radiation exposure or other hazards.
- Laser Radiation: This product emits a Class II laser. Do not stare directly into the laser beam or view directly with optical instruments. Avoid setting up the laser at eye level.
- Exposure Time: Exposure to a Class II laser beam is considered safe for a maximum of 0.25 seconds, as eyelid reflexes normally provide adequate protection.
- Modifications: Do not disassemble or modify the laser tool in any way. There are no user-serviceable parts inside. Modifications can lead to hazardous laser radiation exposure.
- Children: Do not operate the laser around children or allow children to operate the laser.
- Operation: Be careful not to expose your eyes to the emitting laser beam during operation.
2. Product Overview
The BOAYAL T92 is a self-leveling 3x360° 3D 12 green cross line laser level designed for construction and home decoration tasks. It features high visibility green lasers, a rechargeable battery, and remote control operation.
Figure 2.1: Front view of the BOAYAL T92 Laser Level.
2.1. Product Structure
Figure 2.2: Key components of the laser level.
- Laser Emission Port: Where the green laser lines are projected.
- Type-C Charging Port: For recharging the internal lithium battery.
- Mechanical Switch: Used to lock/unlock the pendulum and power the device.
- 1/4" Universal Interface: For mounting the device on a tripod or other accessories.
2.2. Control Panel
Figure 2.3: Control panel with status and battery indicators.
- Status Indicator: Shows the current operating mode (self-leveling, locked, pulse).
- Battery Indicator: Displays the remaining battery charge (4 green LED lights).
- Power Button (Red): Long press to power on/off. Short press to switch brightness levels.
- Blue Button (V1): Controls the vertical laser line at the front of the instrument.
- Green Button (H): Controls the horizontal laser line.
- Yellow Button (V2): Controls the vertical laser line on the side of the instrument.
3. Setup
3.1. Package Contents
Upon unpacking, please ensure all items listed below are present and in good condition:
Figure 3.1: Contents included in the package.
- BOAYAL T92 Laser Level Instrument
- Laser Target Plate
- Type-C Charging Cable
- Remote Control
- User Manual
- L-shaped Bracket
- Soft Case
- Metal Base
- Packing Box
3.2. Charging the Battery
The device is equipped with a built-in 4000mAh lithium battery. Before first use, it is recommended to fully charge the battery.
Figure 3.2: Type-C charging port for the 4000mAh lithium battery.
- Connect the Type-C charging cable to the charging port on the side of the laser level.
- Connect the other end of the cable to a suitable USB power adapter (not included).
- The battery indicator lights will show charging status. Ensure the device is fully charged before extensive use.
3.3. Initial Placement
Place the laser level on a stable, level surface or mount it on a tripod using the 1/4" universal interface. Ensure the area is clear of obstructions for the laser lines.
4. Operating Instructions
Always keep the lock switch in the locked position when moving or storing the laser level to protect the pendulum mechanism.
4.1. Self-Leveling Mode
- Slide the lock switch to the unlocked position. The machine will unlock, and all laser lines (1 horizontal, 2 vertical) will light up.
- The device will automatically level itself. The indicator light will turn green when leveled.
- If the indicator light is red and the laser flashes frequently, it means the device is out of its self-leveling range (approximately 4°). Place the laser on a flatter surface until it self-levels.
Figure 4.1: Automatic leveling function. Tilt angle < 4° for normal operation.
4.2. Locked Mode (Manual Mode)
- Slide the lock switch to the locked position.
- Long press the power button. All laser lines will turn on and flash every 5 seconds, and the indicator light will be red.
- In this mode, the laser level can be tilted at any angle to project lines for sloped applications (e.g., stair railings).
- To turn off, long press the power button again.
Figure 4.2: Slash pattern function for projecting lines at any angle using a tripod.
4.3. Laser Line Selection
In either self-leveling or locked mode, you can select which laser lines are active:
Figure 4.3: The 360° laser module can project horizontal and vertical lines.
- Blue Button (V1): Toggles the front vertical laser line.
- Green Button (H): Toggles the horizontal laser line.
- Yellow Button (V2): Toggles the side vertical laser line.
4.4. Brightness Adjustment (Energy Saving Mode)
Short press the power button to cycle through 4 levels of brightness. This helps reduce energy consumption and extends working time.
Figure 4.4: Usage time varies with brightness level (gear). Short press power button to switch.
4.5. Pulse Mode
In self-leveling mode, long press the power button to enter pulse mode. The indicator light will keep flashing. This mode is designed for use with a laser receiver (not included) for long-distance work, enhancing visibility in bright conditions or over longer ranges. Energy saving mode is not active in pulse mode.
Figure 4.5: Pulse mode allows cooperation with a laser receiver for extended working distances.
4.6. Remote Control Instructions
The included remote control allows for convenient operation without needing to be near the device.
Figure 4.6: Remote control buttons and their functions.
- V1 button (Blue ring): Controls the vertical laser line at the front of the instrument.
- Brightness button (Green bars): Controls the brightness of the light (4 levels of adjustment).
- H button (Green ring): Controls the horizontal laser line.
- V2 button (Yellow ring): Controls the vertical laser line on the side of the instrument.
5. Maintenance
- Accuracy Checks: The laser tool is factory-calibrated. It is recommended to perform an accuracy check before first use and periodically, especially for precise layouts.
- Battery Care: Do not short battery terminals. Do not mix old and new batteries; replace all at once with the same brand and type. Remove batteries if the tool will not be used for several months.
- Storage: Do not store the laser tool in direct sunlight or expose it to high temperatures. Extreme temperatures can deform plastic parts.
- Cleaning: Exterior plastic parts can be cleaned with a damp cloth. Do not use solvents. Use a soft, dry cloth to remove moisture before storage.
- Disposal: Do not dispose of this product or batteries with household waste. Follow local codes for proper disposal.
6. Troubleshooting
- Laser Not Leveling: Ensure the device is placed on a stable surface and within its self-leveling range (approx. 4°). If the indicator is red and flashing, adjust the device's position.
- Laser Not Turning On: Check the battery level. Ensure the battery is charged. Verify the mechanical switch is in the correct position (unlocked for self-leveling, or locked then long-press power for manual mode).
- Laser Lines Dim: Adjust the brightness level using the power button or remote control. Ensure the battery is sufficiently charged.
- Laser Flashing Continuously: In self-leveling mode, this indicates the device is out of level. In locked mode, this is normal behavior. In pulse mode, the indicator will also flash.
7. Specifications
| Feature | Specification |
|---|---|
| Model Number | T92 |
| Laser Class | Class II |
| Laser Wavelength | 505-550nm (Green Beam) |
| Leveling Accuracy | ±1.5mm/5m (±3mm/10m) |
| Leveling/Compensation Range | 4°±1° |
| Working Distance (Line) | 30m (100FT) |
| Operating Time | First gear: ~6 Hours, Second gear: ~9 Hours, Third gear: ~15 Hours, Fourth gear: ~30 Hours |
| Power Supply | 3.7V 4000mAh Lithium battery |
| IP Rating | IP54 |
| Operating Temperature Range | -10℃ ~ +50℃ |
| Storage Temperature Range | -25℃ ~ +70℃ |
| Size | 98.5*73*96mm |
| Weight | 340g |
| Certification | CE, RoHS, KC, WEEE |
Figure 7.1: Superior light source designed for high and low temperature resistance (-10°C to 50°C).
8. User Tips
- Stable Surface: Always place the laser level on a very stable surface or a sturdy tripod to ensure accurate readings, especially in self-leveling mode.
- Battery Life: To maximize battery life, use the lowest brightness setting that is suitable for your working environment. Fully charge the battery before long work sessions.
- Outdoor Use: For outdoor or very bright indoor conditions, consider using pulse mode with a compatible laser receiver to extend visibility and working distance.
- Storage: Always lock the pendulum before moving or storing the device to prevent damage to the internal components.
9. Warranty and Support
9.1. Warranty Information
The BOAYAL T92 Laser Level comes with a one-year warranty from the date of purchase. To claim warranty service, the warranty card and proof of purchase (invoice) must be provided.
The warranty does not cover:
- Unauthorized disassembly of the instrument.
- Damage due to incorrect operation or man-made causes.
- Damage caused by not using original accessories.
- Repairs performed by unauthorized personnel or units.
- Products with deleted serial numbers.
9.2. Further Assistance
For any questions, technical support, or warranty claims, please contact your local dealer or the official BOAYAL customer service. You may also refer to the official PDF user manual for additional details.
10. Applications
The BOAYAL T92 laser level is a versatile tool suitable for a wide range of applications, including:
Figure 10.1: Common applications for the laser level.
- Interior Renovation
- Floor Laying
- Wooden Installation
- Stair Laying
- Ornament Installation
- Wall Construction