XCMT Copper Sintered Brake Pads

Contents

XCMT Copper Sintered Brake Pads User Manual

For Sur Ron Surron Ultra Bee Electric Off Road Motorcycle Dirt Bike

1. Introduction

This manual provides essential information for the safe and effective installation, maintenance, and disposal of your XCMT Copper Sintered Brake Pads. Please read this manual thoroughly before attempting any installation or maintenance procedures. Proper installation and maintenance are crucial for optimal performance and safety.

2. Safety Information & Warnings

  • Compatibility: This product is designed for specific motorcycle models. Installation on non-compatible vehicles may lead to improper fitment, functional failure, or safety hazards. Always confirm compatibility with your vehicle before installation.
  • Professional Installation: Installation must be performed by a qualified motorcycle technician. Incorrect installation can lead to serious injury or damage.
  • Torque Wrench Use: A torque wrench must be used during installation to ensure bolts are tightened to the specified torque value. Never tighten by hand. Over-torquing can strip threads, while under-torquing may cause the part to detach during riding.
  • Pre-Ride Inspection: Inspect the brake pads before every ride. Discontinue use immediately if looseness, deformation, or cracks are detected.
  • Aftermarket Part: This is an aftermarket replacement part. Its performance may differ from original equipment. Carefully assess your intended usage scenario.
  • No Modifications: Do not weld, drill, grind, or otherwise modify this product. Unauthorized modifications can compromise the integrity and safety of the brake pads.
  • Off-Road Use: Some models of these brake pads may not be E-mark certified and are intended for off-road or closed-course use only. Do not use on public roads unless explicitly labeled as "E-marked."

3. Product Overview

The XCMT Copper Sintered Brake Pads are high-performance braking components designed for electric off-road motorcycles like the Sur Ron Ultra Bee. Manufactured from copper-based sintered material, these brake pads offer a long service life and outstanding stopping power across various environments and conditions. Their advanced friction formula ensures stable performance over a wide temperature range, while advanced materials help reduce noise and vibration for a comfortable and confident braking experience.

XCMT Copper Sintered Brake Pads for Sur Ron Ultra Bee

Image: XCMT Copper Sintered Brake Pads, showing the product and branding for Sur Ron Ultra Bee.

4. Specifications

Attribute Detail
Brand Name XCMT
Material Copper Based Sintered
Dimensions (Length x Width x Thickness) 68mm x 38.5mm x 6.8mm (approx.)
Position Front or Rear (Universal fit for Surron Ultra Bee)
Package Quantity 1 Pair
Origin Mainland China
Brake pad dimensions diagram

Image: Diagram illustrating the dimensions of the brake pads (68mm length, 35mm top width, 38.5mm bottom width, 6.8mm thickness).

5. Installation Instructions

Note: Installation should be performed by a qualified motorcycle technician.

  1. Prepare the Motorcycle: Park the motorcycle on a level surface and engage the main stand to ensure stability.
  2. Remove Original Component: Use appropriate tools to carefully remove the original OEM brake pads.
  3. Align New Brake Pads: Align the new XCMT brake pads with the mounting holes in the caliper.
  4. Insert Fasteners: Insert the included fasteners (pins, clips, etc.) to secure the brake pads in place.
  5. Tighten Bolts with Torque Wrench: Tighten all bolts using a torque wrench to the specified torque value for your motorcycle model. Refer to your motorcycle's service manual for exact torque specifications.
  6. Verify Tightness: Never tighten bolts by hand feel. Over-torquing can strip threads, while under-torquing may cause the brake pads to detach during riding, leading to dangerous situations.
  7. Post-Installation Check: After installation, manually apply pressure to the brake lever/pedal and check the brake system for stability. Ensure there is no unusual noise, excessive play, or movement in the brake pads or caliper.
Brake pad installed in caliper

Image: Close-up view of a brake pad correctly installed within a motorcycle brake caliper.

6. Maintenance Recommendations

  • Fastener Tightness: Check the tightness of all fasteners every 500 kilometers or once per month, whichever comes first.
  • Cleaning: Clean the brake pads and surrounding components with water and a neutral detergent. Avoid using strong acids or alkalis, as these can cause corrosion and damage to the materials.
  • Increased Inspection: If the motorcycle is frequently used in off-road, muddy, or salt-spray environments, increase the frequency of inspection for wear and damage.
  • Brake Fluid (if applicable): If your braking system includes hydraulic components (e.g., brake master cylinder, brake hose), ensure it uses DOT-certified fluid lines and satisfies sealing integrity and pressure resistance requirements.

7. Troubleshooting

If you experience any issues with your brake pads, such as unusual noise, reduced braking performance, or excessive wear, it is recommended to consult a qualified motorcycle technician immediately. Do not attempt to diagnose or repair complex brake system issues yourself unless you are a trained professional.

  • Reduced Braking Performance: Could indicate worn pads, contaminated surfaces, or issues with the hydraulic system.
  • Squealing/Grinding Noise: May be normal during break-in, but persistent noise could indicate improper installation, worn pads, or foreign debris.
  • Vibration: Can be caused by uneven pad wear, warped rotors, or loose components.

8. User Tips

No specific user tips were available from customer reviews or Q&A for this product at the time of manual creation. Always follow the installation and maintenance guidelines provided in this manual for best performance and safety.

9. Disposal

When the product reaches the end of its lifespan, it should be disposed of as metal/plastic waste through local recycling facilities or authorized waste collection points. Do not dispose of it randomly in household waste.

10. Warranty & Support

For any questions regarding product compatibility, installation, or performance, please contact the seller or manufacturer directly. Keep your purchase records for any potential warranty claims. Specific warranty terms may vary and are typically provided at the point of purchase.

Manufacturer Information:

  • Manufacturer: Yongkang Sanyi Trading Co., Ltd
  • Address: CN-1/F, No.20, Suxi Middle Street, Suxi New Village, Dongcheng Street, Yongkang City, Jinhua City, Zhejiang Province, China
  • EU Authorized Representative: MJCM SARL
  • EU Representative Address: FR-78 avenue des Champs Elysees Bureau 326 Paris France
  • EU Representative Email: mjcm190928@gmail.com

This manual may be updated without prior notice. Please refer to the latest version for current information.

11. Disclaimer

The manufacturer and EU Authorized Representative shall not be held liable for any damage, injury, or accident resulting from:

  • Incorrect or unqualified installation.
  • Use beyond the intended scope (e.g., on public roads without E-mark certification, if applicable).
  • Unauthorized modifications to the product.
  • Failure to inspect or maintain the product as instructed in this manual.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.