1. Product Description
The MOES Water Timer (Model NN1101A) is a non-smart electronic water valve with an integrated display, designed for easy and reliable irrigation control. It features manual rain delay, manual start, and programmable watering schedules to adapt to various usage needs. The IP55-rated housing supports outdoor installation, and its solid brass inlet and outlet connectors ensure durability and stable water flow, eliminating concerns about cracked plastic fittings.
Warning: Do not disassemble, reassemble, modify, or attempt to repair this product by yourself. This work should be performed by authorized professionals.
Video: Overview of MOES Water Timer features, including brass fittings, easy setup, battery installation, and freezing weather precautions.
2. Product Overview
The water timer features a large LCD screen, a rotary knob for mode selection, and four buttons for settings adjustment. The brass inlet connects to your faucet, and the brass outlet connects to your hose.
Image: Front view of the MOES Water Timer highlighting its brass inlet, LCD display, rotary knob, and control buttons.
Screen Content Indicators:
- Battery Indicator: Shows current battery level. Flashes when low.
- Rain Delay: Indicates watering delays during rainy days.
- Child Lock: Shows if child lock function is ON/OFF.
- Every: Indicates watering interval.
- Next: Displays the next watering time.
- Manual: Indicates manual watering mode is ON.
- Watering: Indicates active watering.
Knob Content Functions:
- NOW: Set current time.
- START TIME: Set the time to start watering.
- HOW LONG: Set watering duration (1 minute to 23 hours 59 minutes).
- HOW OFTEN: Set watering frequency (1 hour to 23 hours / 1 day to 7 days).
- AUTO: Automatically run watering schedules.
- OFF: Turn off the watering timer.
Button Functions:
- Knob: Turn to customize your watering schedule.
- OK: Confirm settings or proceed to the next step.
- + Button: Adjust time and system settings, or delay the watering program.
- - Button: Adjust time and system settings, or enable child lock.
- Faucet Icon Button: Press in Auto mode to set up manual watering.
3. Installation
Installing the Batteries
- Remove the cover on the back of the timer by pulling it out.
- Install 2 new AA (1.5V) alkaline batteries (not included). Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries.
- Firmly reinstall the cover onto the timer.
Note: Please pay attention to the positive and negative poles of the battery and place them correctly.
Image: Illustration of installing AA alkaline batteries into the water timer, emphasizing correct polarity.
Important Battery Notes:
- Secure the battery cover to ensure the waterproofness of the battery compartment.
- Remove batteries if the timer is not used for a long time or before winter to avoid damage.
- Replace batteries promptly when the low battery indicator appears.
- Do not install rechargeable batteries to avoid low voltage issues.
- The timer has a power failure memory function. After a power outage or battery reinstallation, you only need to set the current time, not the entire watering schedule.
Connecting to Faucet:
The timer features a standard NH3/4" external thread (US version) for easy connection to most outdoor faucets. Ensure a silicone gasket is properly installed to prevent leaks.
Image: Detail of the NH3/4" external thread inlet for connecting to a faucet.
4. Program Settings
4.1. Setting Current Time (NOW)
- Turn the knob to "NOW". The hour digits will flash.
- Press + or - to adjust the hour. Press OK to confirm and move to the minute digits.
- The minute digits will flash. Press + or - to adjust the minutes (0-59 in cycle). Changing minutes does not affect the hour setting.
- Press OK to confirm, returning to the hour setting. Alternatively, rotate the Knob to save the settings.
Tip: Hold the + or - button to change the time quickly.
Image: Setting the current time using the rotary knob and LCD display.
4.2. Setting Start Time (START TIME)
- Turn the knob to "START TIME". The default value of 6:30 will be displayed, and the hour digits will flash.
- Press + or - to set the hour. Press OK to confirm and move to set the minutes.
- Press + or - to set the minutes. Press OK to confirm.
- Rotate the Knob to save the settings.
Image: Setting the watering start time.
4.3. Setting Watering Duration (HOW LONG)
- Turn the knob to "HOW LONG".
- Press + or - to set the hour of watering duration. Press OK to confirm and move to set the minutes.
- Press + or - to set the minutes. Press OK to confirm.
- Rotate the Knob to save the settings.
Tips:
- The duration can be set from 00H01M to 23H59M.
- Setting the time to 00H00M indicates that the watering plan is turned off.
Image: Setting the watering duration.
4.4. Setting Watering Frequency (HOW OFTEN)
- Turn the knob to "HOW OFTEN".
- Adjust using the + or - buttons. The available range is 1 hour to 23 hours or 1 day to 7 days.
- Rotate the knob to save the settings.
Tips:
- The value of "HOW LONG" must be less than "HOW OFTEN" (in integer units).
- When "HOW OFTEN" is set to 1H, the maximum "HOW LONG" is 00H59M.
Examples of watering frequencies are every 1 day, every 2 days, and every 3 days.
Image: Setting the watering frequency, showing options for hours and days.
5. Operating Modes
5.1. AUTO Mode
- Turn the knob to "AUTO". The watering plan will be automatically executed. The screen will turn off after 1 minute.
- The screen will display the current time and the next scheduled valve opening time, alternating every 3 seconds.
Note: Automatic valve schedules will only be executed when the knob is set to the AUTO position.
5.2. OFF Mode
- To stop the watering plan for an extended period, turn the knob to "OFF". Your settings will be saved.
- The timer will not water automatically while in OFF mode (the screen will display "OFF" in large letters).
- To start watering automatically again, turn the knob back to "AUTO" to resume your programmed watering schedule.
6. Additional Features
6.1. Rain Delay Watering
Rain Delay mode allows you to skip the watering schedule for a set period of time, which helps to save water during rainy days.
- When the knob is at the "AUTO" position, press the + button for 3-5 seconds to enter the rain delay mode.
- The screen will display "1 day" by default. Press + or - to select 1 day to 15 days for rain delay setting. Press OK to confirm.
- To quit rain delay mode, hold the + button again for 3-5 seconds to resume your programmed watering schedule.
Tips:
- If the OK button is not pressed, the setting will exit automatically after 5 seconds without saving any changes.
- If the rain delay is canceled before the "START TIME", the water timer will continue running the scheduled task according to the START TIME. Otherwise, it will skip to the next scheduled task.
Image: Setting the rain delay function to avoid overwatering during wet weather.
6.2. Manual Watering
This feature allows you to water without interrupting your watering schedule.
- Keep the knob at the "AUTO" position, click the OK button to enter manual watering mode.
- The default duration of manual watering is 0 minute. Press + or - button to set the manual watering time (up to 7H59M).
- Press OK to start watering, otherwise it will quit after 10 seconds.
Tip: Manual watering takes priority over scheduled watering; the scheduled task will be skipped if there is a conflict.
6.3. Child Lock Function
To prevent accidental changes to your watering schedule, the timer includes a child lock function.
- Keep the knob at the "AUTO" position. Press and hold the - button for 3 seconds until a lock icon appears on the screen.
- To cancel the child lock setting, press and hold the - button again for 3 seconds.
Image: The child lock function prevents unintended changes to settings.
7. Maintenance
Winterization
Crucial warning: You must remove the timer from the faucet before freezing weather to prevent internal damage. Store the timer indoors in a dry, frost-free location.
Image: Proper winterization by removing the timer from the faucet before freezing temperatures.
Cleaning
If the filter is clogged, clean or replace it to ensure proper water flow and pressure.
8. Specifications
| Feature | Specification |
|---|---|
| Model | NN1101A |
| Water Duration | OFF (00H00M), 00H01M-23H59M |
| Watering Frequency | 1 hour to 23 hours / 1 day to 7 days |
| Working Pressure | 0.5-8 bar (7.25psi - 116psi) |
| Thread | For taps with 3/4" |
| Working Temperature | 4.5 °C-45 °C (40.1°F-113 °F) |
| Battery Power | 2x AA Alkaline batteries (1-3 outlet models), 4x AA Alkaline batteries (4 outlet model). Do not use rechargeable batteries. |
| IP Rating | IP55 |
| Material | Brass Inlet & Outlet |
Dimensions (Approximate)
Image: Dimensions for the 1-Outlet model.
Image: Dimensions for the 2-Outlet model.
Image: Dimensions for the 3-Outlet model.
Image: Dimensions for the 4-Outlet model.
9. Troubleshooting
| Problem | Possible Cause | Possible Solution |
|---|---|---|
| Leakage |
|
|
| The water won't stop / flow out |
|
|
| Short battery life |
|
Use new alkaline batteries. |
| Low water pressure |
|
|
| No response from manual/rain delay function | After setting the manual watering or rain delay time, the OK button is not pressed. | Press OK button again after the time confirmed for saving and running. |
If you have problems installing or operating your device, please review its product data sheet: https://www.moestech.com/blogs/news/tww-cr01-us-cu
10. User Tips
Based on common user experiences, here are some tips for optimal use:
- Always ensure the battery compartment is securely closed to maintain the IP55 waterproof rating.
- For multi-zone irrigation, consider the 2-outlet, 3-outlet, or 4-outlet models to manage different areas of your garden efficiently.
- Utilize the rain delay feature to prevent overwatering and conserve water, especially after unexpected rainfall.
- If you notice a drop in water pressure, check the filter for any blockages before troubleshooting other issues.
11. Warranty and Support
Declaration of Conformity
WENZHOU NOVA NEW ENERGY CO.,LTD declares that the electronic equipment type NN1101A is in compliance with Directive 2014/30/EU and 2011/65/EU. The full text of the EU declaration of conformity is available at: https://www.moestech.com/blogs/news/tww-cr01-us-cu
Warranty Instructions
Products are covered by a 24-month warranty, effective from the date of purchase by a retail customer. To exercise warranty rights, the purchaser must present a warranty card and proof of purchase (VAT invoice, financial receipt, or other document confirming the actual date of purchase).
If product quality problems occur within 24 months from the date of receipt, prepare the product and packaging and go to the place or store where you purchased it for after-sales maintenance. If the product is damaged due to personal reasons, a maintenance fee will be charged.
The warranty does not cover:
- Mechanical damage caused by user fault and product defects caused by such damage.
- Damage caused by improper use of the product.
- Defects due to natural wear and tear during use.
- Removal of the warranty seal or serial number from the product.
- Actions to eliminate physical defects outside of authorized service.
- Use of non-original parts and consumables.
Recycling Information
All products marked with the symbol for separate collection of waste electrical and electronic equipment (WEEE Directive 2012/19/EU) must be disposed of separately from unsorted municipal waste. This equipment must be disposed of at designated collection points for electrical and electronic equipment designated by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences for the environment and human health. Contact your installer or local authority for information on collection points.
Manufacturer Contact
Manufacturer: WENZHOU NOVA NEW ENERGY CO.,LTD
Address: Power Science and Technology Innovation Center, NO.238, Wei 11 Road, Yueqing Economic Development Zone, Yueqing, Zhejiang, China
Tel: +86-577-57186815
After-sale Service: service@moeshouse.com
EU Representative (AMZLAB GmbH):
Address: Laubenhof 23, ESSEN 45326
Email: info@amz-lab.de
Tel: +491745298066
UK Representative (EVATOST CONSULTING LTD):
Address: Suite 11, First Floor, Moy Road Business Centre, Taffs Well, Cardiff, Wales, CF15 7QR
Email: contact@evatost.com
Tel: +44-292-1680945