1. Introduction
Thank you for choosing the GGBEE Tuya WiFi Smart Wall Touch Switch RF433. This smart switch allows you to control your lights via touch, mobile app, voice commands, or an RF433MHz remote. It is designed for convenience and modern living, compatible with both neutral wire and no-neutral wire setups.

Image 1.1: Tuya WiFi Smart Wall Touch Switch with voice, app, and remote control capabilities.
2. Setup and Installation
2.1 Safety Precautions
- Ensure electricity is cut off at the main circuit breaker during installation to prevent electric shock.
- Installation should be performed by a qualified electrician if you are unsure.
- Do not exceed the maximum load current of 10A or total power of 1000W.
2.2 Removing the Panel
To access the wiring terminals, gently remove the front glass panel using a screwdriver. Insert the screwdriver into the notch at the bottom and pry it open.
2.3 Wiring Diagram
The switch supports two main wiring modes: with a neutral wire or as a single live wire (no neutral wire required). A capacitor is provided for no-neutral wire setups to ensure stable operation.

Image 2.1: Wiring diagrams for both Live Neutral Wire and No Neutral Wire (with capacitor) installations.
- For Neutral Wire (N) Supported Wiring:
- Fire wire connects to the