Foreword
Thank you for purchasing our 6-inch aluminium camera monitor. Please read this manual carefully before using the unit. Have a great experience!
Cautions
- Please avoid heavy impact and dropping the product onto the ground.
- The screen is made of glass. Do not drop the screen towards the ground. Keep away from injury if the screen is broken.
- Keep the product away from heat sources and avoid prolonged exposure to the sun, as this will damage the LCD screen.
- To avoid damaging the product, do not disassemble or repair the unit yourself. There are no user-adjustable components inside.
- To maintain the LCD screen and protect the cover, please follow these guidelines to avoid damage:
- Please refrain from using hard objects to hit the screen.
- Please do not force to wipe the screen.
- Please do not use chemical solutions to clean the screen.
- Please do not spray any detergent on the screen.
- Please do not write on the screen directly.
- Please do not stick anything on the screen.
- Please simply wipe with a clean soft cloth and ensure no water is on the screen.
Key Features
- 6-inch 1920x1080 full HD IPS screen for confident viewing of details.
- Solid and durable aluminium housing.
- Supports 3D LUT Log to REC.709 and user 3D LUT upload (up to 32).
- 4-group user switching for quick access to pre-set menus.
- Waveform, Vector, Histogram, and audio meter can be moved horizontally and vertically.
- HDR monitoring: What you see is what you get.
- Multiple power supply options: DC IN, Type-C 5V, Battery Slot.
- Stereo Earphone output.
- DC 8V power out to power your DSLR camera or mirrorless camera.
Product Overview
1.1 Front Panel Instruction
Indicator: After connecting the power, the indicator light is on (red). After the monitor turns on, it turns yellow. After the signal is connected, it turns green.
1.2 Rear Panel Instruction
Battery Lock: The battery lock will engage after the battery is installed. Please press the lock button first before removing the battery.
NP-F Battery Slot: Applicable for NP-F series batteries.
1.3 Top Button Instruction
| Button | Function when OSD is not displayed | Function when OSD is displayed |
|---|---|---|
| F1 | Custom function button F1 | / |
| F2 | Custom function button F2 | / |
| F3|EXIT | Custom function button F3 | Return/Exit Menu |
| MENU | Display OSD Main menu | Confirm button |
| V (Down Arrow) | Decrease volume or backlight | Select next menu item; Decrease or adjust value of selected parameter |
| Λ (Up Arrow) | Increase volume or backlight | Select previous menu item; Increase or adjust value of selected parameter |
| EXIT/Power | Power On/Off button |
1.4 Bottom Port Instruction
Includes DC OUT 8V, 1/4 Screw Thread, and Type-C 5V port.
- DC OUT 8V: DC power output interface. Polarity is as indicated (--+). Barrel output for powering your camera with a separately available DC coupler via adaptor (e.g., NP-FW50 Sony & LP-E6 Canon&DMW-BLF19 Panasonic).
- 3.5mm Earphone Port: For audio output.
- DC IN 5V (Type-C): Type-C power input. Recommended for local power supply only. Not recommended to connect other devices to provide loop-out power.
- LUT files import / firmware update: This port is also used for LUT file import and firmware updates.
1.5 Left Port Instruction
Includes HDMI IN, HDMI OUT, and DC IN 12V.
- HDMI IN: V2.0, HDMI signal input, up to 4K@60Hz.
- HDMI OUT: V2.0, HDMI signal output, up to 4K@60Hz.
- DC IN 12V: DC power input. Polarity is as indicated (--+).
1.6 Right Port Instruction
Includes 1/4 Screw Thread.
1.8 Mount Points
There are two 1/4-20 thread points (bottom, right side) for easy connection to a hot shoe mount or tripod for fixed installation.
1.9 Sunshade Installation
First, lock the Sunshade Frame with the monitor tightly. Open the sunshade, match the sticker on the sunshade inside to the marked part of the sunshade frame, smooth and press 3 sides on the sunshade, and then complete the sunshade installation.
Setup: Power Supply
1.7 Power Supply Way
- The rear cover of the monitor is equipped with an F970 battery plate, compatible with F970 series batteries.
- Sony F970 battery plate for Sony DV: Supports Sony F970, F960, F950, F930, F770, F750, F730, F570, F550, F530 series.
Remark: Please remove the battery from the monitor if you do not use it for a long time.
- The left side of the monitor has a DC 12V input power port (5.5mm outer, 2.1mm inner) and supports 7 ~ 24V wide voltage. The DC power adapter needs to be purchased separately.
Note: When using DC OUT 8V to power another device simultaneously, a 12V/2.5A power adapter is required at least.
- The bottom of the monitor has a Type-C 5V input power port. This port can be connected to a power bank for power supply and is not used for data transmission. It is recommended for local power supply only and not for connecting other devices to provide loop-out power.
Operating Instructions
2. Menu Operation Instruction
After the monitor is correctly connected to the power supply, the indicator light is on (red). The monitor will then turn on automatically, the indicator light turns yellow, and after the HDMI signal is input, the indicator light turns green. Press the power button to shut down the monitor (while power is still connected). To turn on, press the power button manually.
- When the menu is not displayed, directly press the "V" or "Λ" button to adjust the volume or backlight. This can be set as volume or backlight via the menu's User Option -> Left Right Key Set.
- Press the "MENU" button to enter the OSD main menu. Use the "V" or "Λ" button to select first-level items, then press "MENU" to confirm and enter the secondary menu. Use "V" or "Λ" to select items.
- After selection, press the "MENU" button to confirm and enter the function menu. Use "V" or "Λ" to select the corresponding function or adjust the parameters.
- Press the "F3|EXIT" button to return or exit the menu.
4. Menu Function Instruction
The monitor offers a wide range of auxiliary functions to assist with monitoring and image analysis.
Assist Functions
- All Waves: Displays waveform, vector, histogram, and embedded audio.
- Waveform: On/Off. Modes: RGB, YUV, Y. Waves Trans: Off, 25%, 50%, 75%. Position X/Y: 0-100. Assists with exposure correction and lighting evenness.
- Vector: On/Off. Position X/Y: 0-100. Shows image saturation and pixel color distribution on the color spectrum.
- Histogram: On/Off. Modes: RGB1, RGB2, Y. Position X/Y: 0-100. Displays graphic of color tone distribution and exposure status.
- Focus Assist (Peaking): On/Off. Color: Red, Green, Blue. Peaking Level: 1-10. Highlights in-focus areas.
- Embedded Audio: On/Off. Position X/Y: 0-100. Provides numerical indicators for audio levels.
- Over Exposure: On/Off. Exposure Level: 10-100. Fills over-threshold areas with a striped pattern.
- Check Field: On/Off. Mode: Red, Green, Blue, Mono. Quickly adjusts hue and saturation.
- False Colors: On/Off. Mode: Normal, ARRI. Depicts objects in colors different from true color to show exposure levels.
Marker Functions
- Grid: On/Off. Mode: 2x2, 3x3, 4x4, 5x5, 6x6, 7x7, 8x8, 9x9, Custom. Rows/Columns: 2-9. Color: Red, Green, Blue, Black, White, Gray. Divides the picture into equal grids.
- Safe Frames: On/Off. Mode: 80%, 85%, 90%, 93%, 96%, 2.35:1, 9:16. Color: Red, Green, Blue, Black, White, Gray.
- Center Marker: On/Off. Color: Red, Green, Blue, Black, White, Gray.
- Ratio Marker: On/Off. Mode: 4:3, 13:9, 14:9, 15:9, 16:9, 1.85:1, 2.35:1, 9:16. Color: Red, Green, Blue, Black, White, Gray. Modified Mark: 0-5.
Image Functions
- Scan Mode: Under Scan, Over Scan.
- Aspect Ratio: Auto, 16:9, 16:10, 4:3, 5:4, 1.85:1, 2.35:1, Full Screen. Matches different camera anamorphic lenses.
- Anamorphic: On/Off. Mode: 1.33X, 1.6X, 2.0X, 2.0X MAG, User (customizable 1.20X-2.00X). Allows viewing unsqueezed images from anamorphic lenses.
- Image Flip: On/Off. Mode: H Flip, V Flip, H_V Flip.
- Zoom Mode: On/Off. Mode: 2X, 4X, 9X, 16X, User (customizable 100%-200%). Amplifies HD signal for high-quality close-ups.
- Image Freeze: On/Off. Enables checking 1:1 signal source without scaling.
User Option Functions
- LUT: On/Off. When LUT Switch is on, you can use Lut (SLOG2, SLOG3, LOGC, VLOG). LUT is a table for quickly looking up and output specific color data. Supports 3D-LUT tables for color tone recombination.
- Lut Import: Confirm.
- Lut Table: Shows 4 built-in LUTs and up to 32 custom loaded LUTs.
- HDR: On/Off. Mode: HLG1, HLG2, HLG3. Provides more dynamic range and image details.
- Display Adjustment: Backlight (0-100), Brightness (0-100), Contrast (0-100), Saturation (0-100), Tint (0-100).
- Color Adjustment: Display Range (Auto, Limit, Full), Color Temp. (5600K, 6500K, 9300K, User).
- Shortcut Key: Assign F1-F3 buttons to various functions (All Waves, Waveform, Vector, Histogram, Embedded Audio, Center Marker, Safe Frames, Grid, Focus Assist, False Colors, Over Exposure, Anamorphic, Image Freeze, Check Field, Zoom Mode, Image Flip, Aspect Ratio, Ratio Marker).
- Left Right Key Set: Volume, Backlight. Adjusts volume or backlight when menu is not displayed.
System Settings
- User Switch: 1-4. Save and recall set menus.
- Language: Simplified Chinese, English, Japanese, German, French, Italian, Korean, Russian, Portuguese, Dutch, Turkish, Spanish.
- OSD Option: OSD Time (Off, 15Sec, 30Sec, 45Sec), OSD Trans (Off, 25%, 50%, 75%).
- EDID Settings: 2.0, 1.4. Compatible with different camera resolutions. Default to 2.0.
- Volume: 0-100. Adjusts speaker volume.
- Reset: Resets system to original settings.
- Firmware Update: Confirm.
5. How to Load LUT
5.1 USB flash driver format: FAT32
5.2 Max Files Limit: Maximum 32 Lut files
5.3 File requirements:
- The LUT file format suffix should be .cube
- Single file not exceeding 7.9Mb
- Support LUT-3D-Size 16, 17, 32, 33, 64, 65
Remark: LUT file name must be English or Arabic numerals.
5.4 Steps for loading:
- Make sure the USB flash drive is inserted into a Type-C to USB adapter and connected to the monitor's Type-C interface.
- Enter the main menu: LUT -> Lut Import -> Confirm to load. The monitor will auto-detect the USB flash drive.
If there is a valid LUT file on the USB flash drive, the monitor will load the LUT files and show "[n] name". The [n] indicates the quantity number. The "name" should be the LUT file's name. If loading is successful, the screen will show "complete[n]". [n] stands for the quantity number for LUT files, which should be under 32.
PS: How to clear up the imported LUTs?
Insert an empty USB flash drive into the monitor, enter the main menu: LUT -> Lut Import -> Confirm. The imported LUTs will be cleared.
Technical Specifications
| Parameter | Value |
|---|---|
| Panel Size | 6-inch |
| Resolution | 1920 x 1080 pixels |
| Dot Pitch | 0.069 (H) x 0.069 (V) mm |
| Aspect Ratio | 16:9 |
| Brightness | 450 cd/m² |
| Contrast | 1000:1 |
| Viewing Angle | 80°/80°(L/R) 80°/80°(U/D) |
| Backlight | LED |
| Adjustable Backlight | Yes |
| Input | HDMI 2.0 |
| Output | HDMI 2.0 |
| Audio | 3.5mm stereo headphone jack |
| Power In | DC IN 12V, Barrel (5.5mm outer, 2.1mm inner) DC IN 5V (Type-C) Note: please use 5V/2A or more than 2A Type-C power supply |
| Power Out | DC OUT 8V, Barrel (5.5mm outer, 2.1mm inner) Can power for DSLR or mirrorless camera |
| HDMI Input/Output Support Format | 480i/576i/480p/576p 720p (60/59.94/50/30/29.97/25/24/23.98) 1080i (60/59.94/50) 1080p (60/59.94/50/30/29.97/25/24/23.98) 3840×2160p (60/50/30/29.97/25/24/23.98) 4096×2160p (60/50/30/29.97/25/24/23.98) |
| Power Input Voltage | 7~24V |
| Power Consumption | ≤9W |
| Unit Size (mm) | 151.8 × 92.8 × 17.1 (mm) |
| Unit Weight | 184g |
| Mount Points | 1/4-20 thread points (right, bottom) |
| Working Temperature | -20°C ~ 50°C |
| Storage Temperature | -30°C ~ 60°C |
Troubleshooting
7.1 Only black and white or monochrome picture:
Please check saturation, brightness & contrast adjustment in the menu settings.
7.2 No Image after powering on:
- Check if the signal cable connection is in good condition.
- Check the signal cable connection again, and make sure to use the standard adapter to connect the monitor. If power is supplied by battery, please check if the battery is fully charged.
7.3 Earphone No sound:
Check if the Volume control is open. Press the volume button and try to increase the volume.
If there are still other problems, please contact our related technologists for assistance.
As we are continuously improving product features and performance, specifications may change without prior notice.
Additional Resources
A detailed user manual in PDF format is available for download. This document provides comprehensive instructions and diagrams for the FEELWORLD T6 monitor.
You can access the PDF manual here: FEELWORLD T6 User Manual (PDF)