1. Introduction
Thank you for choosing roadsun H11 Car LED Headlight Bulbs. These high-performance LED bulbs are designed to provide superior brightness, enhanced visibility, and a longer lifespan compared to traditional halogen bulbs. This manual provides essential information for the safe installation, operation, and maintenance of your new LED headlights.

Image: roadsun H11 LED Headlight Bulbs providing bright illumination on a vehicle.
2. Safety Information
Important Safety Instructions:
- Always ensure the vehicle's engine is off and the ignition is switched off before attempting any installation or maintenance.
- Allow the vehicle's engine bay to cool down before handling any components, especially around the headlight assembly.
- Wear appropriate safety gear, such as gloves and eye protection, during installation.
- Do not touch the LED chips directly, as oils from your skin can reduce their lifespan.
- Keep the bulbs away from moisture and extreme temperatures during storage and handling.
- If you are unsure about any part of the installation process, consult a qualified automotive technician.
FCC Compliance Statement:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Important:
Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.
3. Package Contents
Please check the package contents upon receipt to ensure all items are present and undamaged:
- 2 x roadsun H11 LED Headlight Bulbs

Image: Contents of the package showing two H11 LED headlight bulbs and their connector.
4. Specifications
| Feature | Specification |
|---|---|
| Model | H11 |
| Brand | roadsun |
| Power | 150W/SET |
| Lumen | 30000LM/SET |
| Color Temperature | 6000K White (Range: 3000K-12000K) |
| LED Chips | 3570 CSP Super Bright Beads |
| Operating Voltage | DC 12-24V |
| Rated Current | 1.5A-10A |
| Operating Temperature | -40°C to +135°C |
| Lifespan | >50,000 Hours |
| Beam Pattern | DOT-Compliant (No Glare), 360° Illumination, 1:1 Halogen Beam Design |
| Cooling System | Aviation 6063 Aluminum Body, Internal 120000rpm Turbo Fan, Sandwich Copper Substrate |
| Special Features | Built-in EMC Anti-Radio Noise, 99% Canbus Error Free, Upgraded PCB Board, Internal Driver Stability |
| Certification | CE |
| Origin | Mainland China |

Image: Key features of the super bright LED design.

Image: Diagram of the efficient cooling system with turbo fan and aluminum body.

Image: Illustration of the efficient heat transfer system using sandwich copper substrate.

Image: Diagram showing the built-in EMC anti-radio noise feature and upgraded PCB.
5. Setup and Installation
The roadsun H11 LED Headlight Bulbs are designed for quick and easy plug-and-play installation, matching the size of fog halogen lamps 1:1. No bulky base or external wiring is required.
- Prepare Your Vehicle: Ensure your vehicle is turned off, the ignition is switched off, and the engine has cooled down completely.
- Locate Headlight Assembly: Open the hood and locate the back of the headlight assembly where the existing halogen bulb is installed.
- Disconnect Power: Carefully disconnect the electrical connector from the back of the existing halogen bulb.
- Remove Old Bulb: Depending on your vehicle model, the halogen bulb may be held in place by a retaining clip, spring, or by twisting. Carefully remove the old bulb.
- Install New LED Bulb: Insert the new roadsun H11 LED headlight bulb into the headlight housing. Ensure it is seated correctly and securely. The 1:1 design ensures proper fitment.
- Connect Power: Reconnect the electrical connector to the new LED bulb. Ensure the connection is firm.
- Secure Dust Cover (if applicable): The compact design of these LED bulbs ensures enough space for the original dust cover to be reinstalled, if your vehicle uses one.
- Repeat for Other Side: Follow the same steps for the other headlight.
- Test Lights: Turn on your vehicle's headlights (low beam and high beam) to ensure both new LED bulbs are functioning correctly.

Image: Example of a car headlight location for bulb replacement.
6. Operating Instructions
Once installed, operate your roadsun H11 LED Headlight Bulbs as you would your standard vehicle headlights. The bulbs are designed to provide optimal illumination for both low beam (wider illumination angle) and high beam (shines to longer distance) settings.

Image: Comparison of low beam (wider angle) and high beam (longer distance) lighting patterns.
These bulbs are designed to perform reliably even in extreme weather conditions such as rain, snow, and fog.

Image: Illustration of the LED bulb's durability in extreme weather conditions (rain, snow, fog).
7. Maintenance
roadsun H11 LED Headlight Bulbs are designed for long-term, maintenance-free operation. However, to ensure optimal performance and longevity:
- Periodically inspect the headlight assembly for any dirt, debris, or moisture accumulation. Clean the headlight lens with a soft cloth and appropriate automotive cleaner if necessary.
- Ensure the electrical connections remain secure and free from corrosion.
- Avoid using abrasive cleaners or harsh chemicals on the headlight lens or the LED bulbs themselves.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| LED bulb does not light up. | Loose electrical connection, incorrect polarity, blown fuse, faulty bulb. | Check and secure electrical connections. Ensure correct polarity (though these are non-polarity). Check vehicle's headlight fuse. If still not working, contact support. |
| Both sides flicker, show interference, or trigger an error light on the dashboard. | Vehicle's CAN bus system detects lower power draw from LEDs and interprets it as a bulb out. | Your car may require CAN bus resistor cancellers/decoders. These can be purchased separately and installed in-line with the LED bulbs. |
| Light output is dim or inconsistent. | Poor electrical connection, insufficient voltage, faulty bulb. | Check and secure all electrical connections. Ensure vehicle's electrical system is providing adequate voltage. |
9. User Tips
- Before purchasing, it is recommended to compare the bulb size with your OEM specifications to ensure perfect fitment.
- While these bulbs are designed to be 99% Canbus error-free, some sensitive vehicle models may still require additional CAN bus decoders to prevent flickering or error messages.
- Always test the lights before fully reassembling the headlight housing and closing the hood.
10. Warranty and Support
roadsun H11 Car LED Headlight Bulbs come with a 5-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use.
For warranty claims, technical support, or any questions regarding your product, please contact the seller or roadsun customer service with your purchase details.
Please refer to the original product listing or your purchase documentation for specific contact information.
A PDF version of the user manual may be available for download from the seller's product page or by contacting customer support.