Introduction
This manual provides detailed instructions for setting up, operating, and troubleshooting your Fenvi AC1200 Dual-Band Wireless WiFi Router. Please read this guide carefully to ensure proper installation and optimal performance of your device.
The Fenvi AC1200 is a high-performance dual-band router designed to provide fast and reliable wireless connectivity for your home network. Featuring 4 high-gain external antennas and Gigabit Ethernet ports, it supports speeds up to 1200Mbps, making it ideal for streaming 4K video, online gaming, and general web browsing.
Package Contents
Verify that your package contains the following items:
- WiFi Router (WR1200S) x 1
- Power Adapter x 1
- Ethernet Cable x 1
- Quick Installation Guide x 1
Setup Instructions
Step 1: Connect Your Devices
- Power Off: Power off your modem and remove its battery (if applicable).
- Connect WAN Port: Connect the WAN port of the router to a LAN port of your modem or directly to an Ethernet jack using the provided Ethernet cable.
- Power On Modem: Reinstall the modem's battery (if removed) and power on your modem.
- Power On Router: Use the included power adapter to connect the router to a power source. The LED indicator lights should turn solid on.
- Connect Devices to Router:
- Wireless Devices: Connect your wireless devices (laptops, tablets, smartphones) to the WiFi network of the router using the default WiFi name (SSID) and password specified on the bottom label of the router.
- Wired Devices: Connect wired devices (desktops, smart TVs) to any of the LAN1, LAN2, or LAN3 ports of the router.
- WPS Function: To establish a WPS connection, press the WPS button on the router and enable the WPS function on another device within 2 minutes.
Step 2: Set up the Router for Internet Access
- Access Web Interface: Start a web browser on a device connected to the router (either wirelessly or via Ethernet). Enter
192.168.100.1in the address bar and press Enter. - Customize WiFi Settings: In the configuration wizard, customize your WiFi Name (SSID) and WiFi Password. Click 'Next'.
- Set Internet Connection Type: Set your internet connection type. PPPoE is often used; enter the User Name and Password provided by your Internet Service Provider (ISP).
Step 3: Access the Internet
After completing the setup:
- Wireless Devices: Connect your wireless devices to the WiFi network using the WiFi name and password you set. The 2.4 GHz WiFi name will be as configured, and the 5 GHz WiFi name will typically be the 2.4 GHz WiFi name with a "_5G" suffix.
- Wired Devices: Your wired devices connected to the router's LAN ports should now be able to access the internet directly.
Operating Modes
The Fenvi AC1200 router supports multiple operating modes to suit various network requirements:
- Router Mode: Connects to the internet via a modem and shares the connection with multiple devices (laptops, tablets) via Wi-Fi and Ethernet.
- Access Point Mode: Connects to an existing host router via Ethernet and extends the wireless coverage, allowing devices (laptops) to connect wirelessly.
- Repeater Mode: Wirelessly extends the coverage of an existing host router, allowing devices (desktops) to connect to the extended network.
Specifications
| Feature | Specification |
|---|---|
| Model Name | AC1200 WiFi Router (WR1200S) |
| Brand Name | fenvi |
| Frequency Band Class | Dual-Band (2.4G & 5G) |
| Wireless Communication Standard | 802.11ac |
| Wireless Transmission Rate | 1200Mbps (Max. LAN Data Rate) |
| 2.4G Wi-Fi Transmission Rate | 300 Mbps |
| 5G Wi-Fi Transmission Rate | 867 Mbps |
| Wired Transfer Rate | 10/100/1000Mbps (Gigabit) |
| WAN Ports | 1 x 10/100/1000Mbps RJ45 Ethernet WAN port |
| LAN Ports | 3 x 10/100/1000Mbps RJ45 Ethernet LAN ports |
| Antennas | 4 * 5dBi External High-Gain Antennas |
| Function | Firewall |
| With Modem Function | No |
| Supports WPS | Yes (via button) |
| Supports WDS | No |
| Standards And Protocols | Wi-Fi 802.11ac/a/b/g/n |
| Number of USB Interfaces | None |
| Application | Home |
| Certification | CE |
| Origin | Mainland China |
| Power Adapter | DC12V/1A |
| Wireless Encryption | WPA-PSK, WPA2-PSK |
| Product Dimensions (approx.) | 210mm (L) x 140mm (W) x 30mm (H) (excluding antennas) |
Troubleshooting (Need Help?)
Q1. What should I do if I cannot access the web management page?
- Reboot your router and try accessing the page again.
- If your computer is set to a static IP address, change its settings to obtain an IP address automatically.
- Verify that
http://192.168.100.1is correctly entered in your web browser. - Try using a different web browser.
- Disable and then re-enable the network adapter being used on your computer.
Q2. What should I do if I cannot access the internet?
- Power off your modem for about 5 minutes, then power it on. If your modem has multiple Ethernet ports, ensure only the necessary port is connected to the router.
- Check if the internet is working normally by connecting a computer directly to the modem via an Ethernet cable. If it is not, contact your Internet Service Provider (ISP).
- Log in to the router's web management page (
192.168.100.1) and navigate to the Network Map page to check the internet IP address. If it's valid, go to Network > Ethernet, modify DNS Type, select Manual, and set the primary DNS to8.8.8.8and the secondary DNS to8.8.4.4. If the IP is not valid, check your hardware connection or contact your ISP.
Q3. How do I restore the router to its factory default settings?
- With the router powered on, use a pin to press and hold the RESET button on the back until the Power LED blinks.
- Alternatively, log in to the web management page of the router, go to Management > Restart & Reset > Reset, and click Restore factory Settings. The router will restore and reboot automatically.
Q4. What should I do if I forget my wireless network password?
- If you have not changed the default wireless password, it can be found on the label at the bottom of the router.
- Connect a computer directly to the router using an Ethernet cable. Log in to the router's web management page at
http://192.168.100.1, and go to Wireless > WiFi > WiFi Settings to retrieve or reset your wireless password.
Q5. Why cannot my phone find the 5GHz signal?
Only devices that support the 5GHz Wi-Fi standard can detect and connect to the 5GHz wireless network. Ensure your phone or device is 5GHz compatible.
Maintenance
- Placement: Place the router in a central location, away from obstructions and sources of interference (e.g., microwaves, cordless phones). Ensure it is in a well-ventilated area to prevent overheating.
- Regular Reboot: Periodically reboot your router (e.g., once a month) by unplugging it from the power source for 10-15 seconds and then plugging it back in. This can help resolve minor network issues and improve performance.
- Firmware Updates: Check the manufacturer's website for firmware updates. Keeping your router's firmware up-to-date ensures you have the latest features, security patches, and performance improvements.
- Security: Regularly change your Wi-Fi password and use strong, unique passwords for both your Wi-Fi network and router's administration page.
User Tips
- 5GHz Compatibility: If you're having trouble connecting to the 5GHz Wi-Fi band, ensure your device (phone, laptop, etc.) supports 5GHz Wi-Fi. Older devices may only support 2.4GHz.
- Optimal Placement: For the best Wi-Fi signal, place your router in an open area, centrally located within your home, and elevated if possible. Avoid placing it near large metal objects or other electronics that might cause interference.
- Wired Connections for Stability: For critical applications like online gaming or 4K streaming on a stationary device, use an Ethernet cable connection to the router's Gigabit LAN ports for maximum speed and stability.
Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the documentation included with your purchase or contact the seller directly. You may also find additional resources and support on the official Fenvi website.
A user manual in PDF format is available for download: View User Manual (PDF)