1. Introduction
Thank you for choosing TEENRAM H11 LED Headlights. These high-performance LED bulbs are designed to provide superior illumination, enhanced visibility, and a longer lifespan compared to traditional halogen bulbs. This manual provides essential information for the safe and effective installation, operation, and maintenance of your new LED headlights.

Image 1.1: TEENRAM H11 LED Headlights in a driving scenario.
2. Package Contents
Please check the package contents upon unboxing:
- 2 x TEENRAM H11 LED Headlight Bulbs

Image 2.1: Contents of the TEENRAM H11 LED Headlight package.
3. Specifications
| Feature | Specification |
|---|---|
| Socket Type | H11 |
| Voltage | 9-32V (Fit 12V/24V systems) |
| Power | 120W/SET |
| Lumens | 20000LM/SET |
| Color Temperature | 6500K White |
| Light Source | 3570 CSP Chips (16 chips per bulb) |
| Lifespan | >50,000 hours |
| Waterproof Rating | IP68 |
| Cooling System | Aviation Aluminum Alloy, Turbo Fan |
| Working Temperature | -40°C to +105°C |
| Application | Headlamp (Low Beam/High Beam), Fog Lamp |
| Fitment | Universal |
| Canbus Compatibility | 99% Canbus Error Free |
Key Features:
- Built-in Smart Driver: Features intelligent temperature control, smart power saving, and intelligent decoding for safe and reliable operation.
- Upgraded 3570 CSP Chip: Utilizes 12 double-sided headlamp cores for high power and performance, delivering +900% brightness.
- Perfect Beam Pattern: Designed with a 1:1 halogen beam pattern to ensure 360° illumination without dark spots, providing wider low beam illumination and longer high beam distance.
- Extreme Weather Durability: IP68 waterproof rating and robust construction ensure bright illumination even in rain, snow, or fog.

Image 3.1: Built-in Smart Driver for safe and reliable performance.

Image 3.2: Upgraded 3570 CSP Chip technology.

Image 3.3: Incredible lighting pattern for low and high beams.

Image 3.4: Designed for extreme weather conditions.

Image 3.5: Benefits of the upgraded LED chip lamp bead.
4. Installation (Setup)
TEENRAM H11 LED bulbs are designed for easy, non-polarity installation. Please follow these general steps:
- Safety First: Ensure your vehicle's engine is off and the headlights are cool to the touch. Disconnect the negative terminal of your car battery to prevent electrical shorts.
- Access Headlight Assembly: Depending on your vehicle model, you may need to remove some components (e.g., air intake, battery cover, or splash guards) to access the rear of the headlight assembly.
- Remove Old Bulb: Locate the H11 halogen bulb. Disconnect the electrical connector by pressing the release tab and pulling it off. Then, unclip or twist the bulb to remove it from the housing.
- Insert New LED Bulb: Take your new TEENRAM H11 LED bulb. It features an all-in-one mini size and non-polarity design, simplifying installation. Carefully insert the LED bulb into the headlight housing, ensuring it is seated correctly and securely. Secure it with the clips or by twisting it into place.
- Connect Electrical Connector: Reconnect the vehicle's electrical connector to the new LED bulb. Ensure a firm connection.
- Test Functionality: Before reassembling any removed components, reconnect your car battery and turn on your headlights to test the new LED bulbs. Check both low beam and high beam (if applicable) and ensure they function correctly.
- Final Assembly: If the bulbs are working properly, reassemble any components you removed to access the headlight assembly.
Important Notes:
- Always compare the size of the new LED bulb with your original halogen bulb to ensure proper fitment within your vehicle's headlight housing.
- Check local LED regulations regarding aftermarket lighting.
5. Operating Instructions
Once installed, your TEENRAM H11 LED Headlights operate like your vehicle's original headlights. Use your vehicle's standard headlight switch to turn them on/off and switch between low and high beams (if your H11 socket is used for dual-beam functionality).
- Low Beam: Provides a wider illumination angle suitable for general driving and city conditions.
- High Beam: Projects light to a longer distance for enhanced visibility on dark roads or highways.
6. Maintenance
TEENRAM H11 LED Headlights are designed for durability and a long lifespan with minimal maintenance. However, following these tips can help ensure optimal performance:
- Keep Clean: Periodically clean your vehicle's headlight lenses to ensure maximum light output. Use a soft cloth and appropriate automotive lens cleaner.
- Inspect Wiring: Occasionally check the wiring connections to the LED bulbs to ensure they remain secure and free from corrosion.
- Avoid Harsh Chemicals: Do not use abrasive cleaners or solvents directly on the LED bulbs or their components.
- Environmental Protection: The IP68 rating protects against dust and water ingress, but avoid prolonged submersion or high-pressure water jets directly on the bulbs.
7. Troubleshooting
If you encounter any issues with your TEENRAM H11 LED Headlights, please refer to the following common problems and solutions:
- Bulb Not Lighting Up:
- Check the electrical connection to the bulb; ensure it is secure.
- Verify that the vehicle's headlight fuse is not blown.
- Ensure the bulb is correctly seated in the housing.
- Flickering, Interference, or Error Lights on Dashboard:
- Some vehicles, especially newer models with CANbus systems, may detect the lower power draw of LED bulbs as a fault. In such cases, your car may require additional resistor cancelers/decoders (sold separately) to resolve flickering, interference, or dashboard error messages.
- One Bulb Works, Other Does Not:
- Swap the non-working bulb with the working one to determine if the issue is with the bulb or the vehicle's wiring/power supply.
- Check the wiring and connections for the non-working side.
- Dim Light Output:
- Ensure your vehicle's battery is providing adequate voltage.
- Clean the headlight lenses if they are dirty or hazy.
8. User Tips
- Beam Adjustment: After installation, it's recommended to check your headlight beam alignment. Improper alignment can reduce visibility or blind oncoming drivers. Consult your vehicle's manual or a professional for proper adjustment.
- CANbus Decoder: If your vehicle is known to be sensitive to LED upgrades (e.g., European cars, newer models), consider purchasing CANbus decoders along with your LED bulbs to prevent common issues like flickering or dashboard errors.
- Professional Installation: If you are unsure about any step of the installation process, it is always best to seek assistance from a qualified automotive technician.
9. Safety and Compliance (FCC Information)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Important: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.
10. Warranty and Support
Your TEENRAM H11 LED Headlights come with a manufacturer's warranty. Please refer to your purchase documentation for specific warranty terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact the seller or TEENRAM customer service through the platform where you made your purchase.