1. Introduction
Thank you for purchasing the LANXSTAR 3-in-1 Electric Vacuum Cleaner. This versatile machine is designed for efficient spray extraction, dry extraction, and moisture extraction, making it ideal for deep cleaning various surfaces in your home, car, office, and other spaces. Please read this manual thoroughly before operation to ensure safe and effective use of the product.
Figure 1: LANXSTAR 3-in-1 Electric Vacuum Cleaner with included accessories.
2. Safety Warnings
WARNING: Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Do not use this product for purposes other than its intended use as a 3-in-1 vacuum cleaner and extractor.
- Inspect the product thoroughly before each use. Do not use if any part is damaged.
- Always follow installation and operation guidelines to avoid injury.
- This device is designed for wet and dry use; however, ensure electrical components are not exposed to excessive water or moisture beyond normal operation.
- Handle all attachments and components with care to avoid cuts or injuries.
- Keep the device and its power cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult during operation or storage.
- In case of ingestion of any small parts or cleaning solutions, seek medical attention immediately.
- Mind potential fire risks. Strictly follow the instruction manual for storage. For disposal, check your local authority's website for proper guidelines.
Compliance Information
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
The product is CE, UKCA, RoHS, and FCC compliant.
3. Product Components and Accessories
The LANXSTAR 3-in-1 Electric Vacuum Cleaner comes with the following parts:
Figure 2: All included components and accessories.
- Host Machine: The main vacuum unit with integrated tanks and motor.
- Hose: Flexible hose for connecting attachments.
- Connecting Pipe: Extension wands for extended reach.
- Small Spray Hand-Pulled Nozzle: For targeted spray and suction on smaller areas.
- Big Spray Hand Pump: Main floor/upholstery tool for wider cleaning.
- Base Plate Carpet Brush: Attachment for general carpet cleaning.
- Small Flat Suction Nozzle: For crevices and tight spaces.
- Round Brush: For dusting and gentle cleaning of irregular surfaces.
- Dust Bag: For dry vacuuming operations.
- Rubber Stopper: For sealing unused ports or for specific functions.
4. Setup and Assembly
- Unpacking: Carefully remove all components from the packaging. Remove any protective films from the device before first use.
- Tank Preparation:
Figure 3: Water tank capacities.
- Ensure the 20L sewage (dirty water) tank is empty before starting.
- Fill the 5L clear water tank with clean water and, if desired, an appropriate cleaning solution. Do not overfill.
- Hose and Attachment Connection:
- Connect the flexible hose to the inlet pipe on the main unit.
- Attach the desired cleaning tool (e.g., big spray hand pump, small spray hand-pulled nozzle, base plate carpet brush) to the end of the hose or connecting pipe.
- Ensure all connections are secure to prevent leaks and maintain suction.
5. Operating Instructions
Power and Mode Selection
Figure 4: Dual control switches for Vacuum and Water Spray.
The unit features dual switches for separate control of the vacuum and water spray functions. Depending on the cleaning task and degree of soiling, you can choose between different cleaning modes:
- Vacuum Switch: Activates the suction function for dry vacuuming or water extraction.
- Water Spray Switch: Activates the water spray function for applying cleaning solution.
Cleaning Methods
Figure 5: Cleaning methods for general vs. stubborn stains.
- For General Stains (Vacuum Mode): Simply turn on the vacuum switch. The powerful suction (1400W, >16KPA) will effectively remove dust, debris, and light moisture.
- For Stubborn Stains (Spray & Extract Mode): Turn on both the vacuum switch and the water spray switch. The high-pressure spray will instantly dissolve stains while simultaneously extracting dirty water, providing effortless deep cleaning.
This machine is ideal for multi-surface cleaning, including car seats, car headliners, car interiors, and home carpets/upholstery.
Figure 6: Multi-surface cleaning applications.
After Use
After completing your cleaning task, turn off both the vacuum and water spray switches. Unplug the device and store it in a dry place, away from children.
6. Maintenance
Regular maintenance ensures optimal performance and longevity of your vacuum cleaner.
Tank Cleaning
- After each wet cleaning session, empty the 20L sewage (dirty water) tank. Rinse it thoroughly with clean water to prevent odor and residue buildup.
- Clean the 5L clear water tank as needed, especially if using cleaning solutions, to prevent clogging.
Filter Maintenance
Figure 7: Airframe structure and filtration system.
The vacuum cleaner features a multi-stage filtration system:
- Washable Dust Filter: Blocks large particles. This filter should be regularly cleaned by rinsing with water and allowing it to air dry completely before reinstallation.
- High-Performance HEPA Filter: Blocks fine dust. Check this filter periodically and clean or replace as recommended to maintain air quality and suction power.
- Motor Filter Cotton: Prevents dust from entering the motor. Inspect this filter regularly and clean or replace if it appears heavily soiled.
Ensure all filters are dry before reassembling the unit.
Accessory Care
- Clean all nozzles, brushes, and hoses after use to remove any trapped debris or residue.
- Store accessories in a clean, dry place.
7. Troubleshooting
This section provides solutions to common issues you might encounter.
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cord not plugged in; power outlet faulty. | Ensure the power cord is securely plugged into a working outlet. Check the circuit breaker. |
| Low suction power | Dirty filters; clogged hose/nozzle; full dirty water tank. | Clean or replace filters. Check hose and nozzles for blockages. Empty the dirty water tank. |
| No water spray | Empty clean water tank; clogged spray nozzle. | Refill the clean water tank. Clean the spray nozzle. |
| Water leaking | Loose connections; damaged hose/tank. | Check all hose and tank connections for tightness. Inspect for cracks or damage. |
If the problem persists after attempting these solutions, please contact customer support.
8. Specifications
Figure 8: Product dimensions and key specifications.
| Feature | Specification |
|---|---|
| Model | LXTF-PXJ-1500Pa |
| Rated Voltage | 230V~ |
| Rated Power | 1400W |
| Rated Frequency | 50Hz |
| Vacuum Level | >16KPA |
| Hose Length | 2.5 meters |
| Total Cord Length | 4 meters |
| Clean Water Tank Capacity | 5 Liters |
| Dirty Water Tank Capacity | 20 Liters |
| Dust Box Capacity | >2 Liters |
| Dimensions (approx.) | 35cm (Width) x 53cm (Height) |
| Origin | Mainland China |
| High-concerned chemical | None |
9. User Tips
No specific user tips were available from customer reviews or Q&A for this product at the time of manual creation. For best results, always pre-test cleaning solutions on an inconspicuous area of the surface to be cleaned.
10. Warranty and Support
For product support, warranty claims, or technical assistance, please contact the manufacturer:
- Manufacturer: ShenZhen Tungfull Digital Technology Co., Ltd
- Address: A302, Building 25, Hong Chao Yuan, ChangFa Mid Road, BanTian Subdistrict LongGang District, ShenZhen
- Email/Tel: 56827370@qq.com / +86-15089309815
A digital version of this user manual is also available in PDF format. You can access it here.