1. Introduction
This manual provides essential information for the installation, operation, and maintenance of your Malcayang Driver Side Master Power Window Switch. This switch is designed for direct replacement in compatible Volkswagen and Seat vehicles. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. Safety & Warnings
Important Safety Information
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
Warning: Keep the device and its cord out of reach of children under 3 years old. Keep away from children unless supervised by an adult. Do not use this product for purposes other than its intended use. Inspect the product before each use; do not use if damaged. Follow installation and operation guidelines to avoid injury.
3. Product Overview
The Malcayang Driver Side Master Power Window Switch is a direct replacement component for controlling vehicle windows. It features multiple buttons for individual window control and a master lock/unlock button.
Product demonstration video showing the power window switch in operation.
Main product image of the Malcayang Driver Side Master Power Window Switch.
The power window switch with illuminated buttons, showing its appearance when installed and active.
An assortment of power window switches, highlighting OEM numbers and compatibility for various Volkswagen and Seat models.
Rear view of the power window switch, clearly showing the 10-pin connector for electrical connection.
A specific variant of the front left driver switch featuring a 'Children Logo' and a 10-pin connector, with an inset showing it installed in a car door panel.
4. Specifications
| Feature | Specification |
|---|---|
| Item Type | Window Control Switch |
| Brand Name | Malcayang |
| Model Name | 1J4959857D, 1J4959857A |
| OEM NO. | 1J4959857C, 1J4959857D, 1GD959857, 1J4959857B, 1J4959857 |
| Special Features | Golf 4 Jetta Bora Passat B5 Seat Power Window Master Switch |
| External Testing Certification | ISO9001 |
| Material | Standard |
| Item Weight | 0.17kg |
| Item Length | 19cm |
| Item Width | 9cm |
| Item Height | 6cm |
| Item Diameter | 0cm |
| High-concerned chemical | None |
| Is It Charged | No |
| Origin | Mainland China |
Compatible Vehicle Models:
- For VW 1999 2000-2004 GTI Golf 4 Jetta MK4 BORA BEETLE Passat B5 B5.5
- For SEAT LEON 2000-2006
- For SEAT TOLEDO 1999-2004
- For PASSAT B5/B5.5 1998-2004
- For Golf MK4 1999-2005
- For Jetta MK4 1998-2005
- For JETTA BORA MK4 1999-2004
- For Volkswagen Beetle (various years and engine types, 2003-2010)
- For Volkswagen Golf (various years and engine types, 2004-2005)
- For Volkswagen Jetta (various years and engine types, 2004-2005)
- For Volkswagen Passat (various years and engine types, 2004-2005)
5. Installation Instructions
How to Replace a Faulty Window Switch:
- Step 1: Disconnect the negative battery terminal before working on the switch to prevent short circuit. Next, unclip the handles using a screwdriver. Lift the faulty switch out of its harness.
- Step 2: If you don't want to take off the door casing or the door handle, simply slide a flat-head screwdriver under the switch bezel and pry it until it loosens to access the housing.
- Step 3: Once the switch pops out of the bezel, disconnect it from the wire harness and detach it from the outlet. Remove the rockers before inserting a new switch into the harness holes.
- Step 4: Assemble the rockers into the new switch and snap the device into the bezel.
Note: Installation instruction is NOT included. Professional Installation Is Highly Recommended.
6. Operating Instructions
Once installed, the power window switch operates as follows:
- Individual Window Control: Press or pull the individual window buttons to raise or lower the corresponding window.
- Master Lock/Unlock: Use the dedicated master button to lock or unlock the passenger window controls.
Ensure all connections are secure and the switch is properly seated in the bezel for optimal performance.
7. Maintenance
To ensure the longevity and proper functioning of your power window switch, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to wipe the surface of the switch. Avoid using harsh chemicals or abrasive cleaners that could damage the plastic or markings.
- Inspection: Periodically check the switch for any signs of wear, damage, or loose connections. If any issues are observed, consider professional inspection or replacement.
- Avoid Liquid Exposure: Prevent liquids from spilling onto the switch, as this can cause electrical shorts or damage to internal components.
8. Troubleshooting
If you experience issues with your power window switch, consider the following:
- Window Not Responding: Check if the window lock button is engaged. Ensure the vehicle's battery is properly connected and charged. Inspect the wiring harness for any visible damage or loose connections.
- Intermittent Operation: This could indicate a loose connection or a failing switch. Re-check the connections or consider replacing the switch.
For complex issues, professional diagnosis and repair are recommended.
9. User Tips
No specific user tips were available from reviews or Q&A for this product at this time. Always ensure the correct part number is matched to your vehicle model before purchase.
10. Warranty & Support
Manufacturer Information:
- Company Name: Guangzhou yangchi auto parts co.LTD
- Address: CN-2 # 1003 min jie ke chuang, minying ke ji yuan, tai he zhen, baiyun district, Guangzhou
- E-Mail: ouyan99@dingtalk.com
- Telephone: 86-18102513142
EU Authorized Representative:
- Company Name: CET PRODUCT SERVICE LTD
- Address: Osterholzallee 144, 71636 Ludwigsburg Germany
- E-Mail: info.cetservice@gmail.com
- Telephone: Tel +4971416432236
Compliance Information: OST_EU_20220224000026
We simply act as EC representative for cross-border sellers, and are not manufacturers/importers/distributors for the product, nor involved in the manufacture/import/sale of the product. Therefore, we are not responsible for any after-sales services related to the product. In case of any product quality or infringement issues, the manufacturer/importer/seller shall be solely held responsible.
NOTE: This product must comply with all applicable safety and regulatory requirements in the market where it is sold. Sellers must assess which requirements and regulations apply based on the actual product type, function, and destination market.
A user manual in PDF format is available for download from the seller's documentation: User manual (PDF).