1. Product Overview
This underwater lamp is specifically designed for underwater environments, compatible with aquariums, swimming pools, and landscape ponds. It features robust waterproof performance, providing decorative and auxiliary lighting with simple operation and convenient installation. Supporting multiple lighting modes and colors, it is suitable for various home landscapes and aquarium maintenance scenarios, enhancing the ambiance of underwater settings.
2. Specifications
| Attribute | Detail |
|---|---|
| Model Number | SC-008 |
| Brand Name | GGBEE |
| Material | Environmentally friendly plastic (ABS Shell) |
| LED Source | 3pcs RGB super bright LED chips |
| Waterproof Level | IP68 (Deep water resistance, suitable for prolonged submersion) |
| Light Battery | 2 x CR2032 Button Cell battery (included) |
| IR Remote Battery | 1 x CR2025 Button Cell battery (included) |
| Signal Range (Remote) | 8-10m (recommended not to exceed 5 meters underwater) |
| Voltage | 6 V |
| Power Source | DC |
| Certification | CE |
| Light Dimensions | 33.5mm (Diameter) x 18mm (Height) |
| Light Weight | 17g |
| Remote Control Dimensions | 51.5mm x 85mm x 6.5mm |
| Remote Control Weight | 16g |
| Features | Waterproof, 16 Colors, Remote Control, Adjustable Brightness, Long Lasting, Environmental Protection |
3. Setup
3.1 Battery Installation
- Unscrew the top cover of the light.
- Insert 2 x CR2032 button cell batteries, ensuring correct polarity.
- Important: Before first use, remove the insulation sheet from the lamp's battery compartment.
- Securely screw the top cover back on, ensuring the waterproof ring is properly seated to prevent water ingress.
- For the remote control, ensure the CR2025 battery is installed and any protective tab is removed.
3.2 Light Placement and Installation
The lights are suitable for aquariums, small pools, and landscape ponds (recommended depth below water surface: 1.5 meters or less).
- Clean Installation Area: Select a flat and smooth surface (e.g., glass or tiles) within the aquarium/pool. Wipe the surface with a dry cloth to remove water stains and dust, ensuring it is free from oil stains for stable fixation.
- Fixed Installation (Suction Cup Type): Remove the protective film from the suction cup surface. Press the suction cup tightly against the desired installation position, and firmly press to expel internal air to ensure secure adhesion to the wall.
- Install the Underwater Light: Insert the light into the suction cup's mounting slot. Adjust the illumination angle as needed (e.g., toward aquatic plants or decorative rocks). Verify secure fixation with no looseness or wobbling.
- Waterproof Inspection: After installation, re-examine the underwater light to ensure the waterproof cover is securely tightened with no gaps, preventing water ingress during underwater use.
4. Operating Instructions
4.1 Touch Control (Basic Model - if applicable)
- Power On: Tap the touch switch on the lamp surface (short press, duration ≤1 second) to activate the underwater light. The default lighting mode is always on.
- Mode Switching: After power-on, tap the touch switch again to cycle through lighting modes or switch light colors, selecting the appropriate mode based on your needs.
- Power Off: In any mode, tap the touch switch (hold briefly) to turn off the underwater light.
4.2 Remote Control
The included 24-button infrared remote control allows for convenient operation.
- Power On/Off: Press the "ON" or "OFF" button on the remote control to turn the underwater light on or off without touching the lamp.
- Color Selection: The remote features 16 color buttons. Press the desired color button (e.g., Red, Green, Blue, White, etc.) to switch the light to that specific color.
- Dynamic Modes: Press the "FLASH", "STROBE", "FADE", or "SMOOTH" buttons to cycle through different dynamic lighting effects.
- Brightness/Speed Adjustment: Use the brightness buttons (sun icon with + or -) on the remote control to adjust light brightness. If the selected dynamic mode supports speed adjustment, these buttons will adjust the speed (e.g., gradual speed, flashing frequency).
- Remote Control Distance: It is recommended that the remote control distance does not exceed 5 meters to avoid obstructions. For underwater remote control, ensure the remote is above water to prevent water ingress and ensure signal transmission.
5. Maintenance
5.1 Battery Replacement
If the underwater light dims, flickers, or fails to turn on, it indicates low battery power. Follow these steps to replace the batteries:
- Carefully detach the underwater light from its suction cup/support.
- Unscrew the top cover of the light.
- Remove the old CR2032 batteries and replace them with new ones, ensuring correct polarity.
- Wipe the surface of the lamp body with a dry cloth to remove water stains, preventing moisture from entering the charging interface.
- Securely screw the top cover back on, ensuring the waterproof ring is properly seated.
- For the remote control, replace the CR2025 battery as needed.
5.2 Battery Conservation
After testing these lights, it is recommended to take out the batteries or re-insert the protective insulation sheet (small white flakes) if the lights will not be used for an extended period. This prevents slow battery consumption.
6. Troubleshooting
- Light Dims, Flickers, or Fails to Turn On: This indicates low battery power. Replace the CR2032 batteries in the light.
- Remote Control Not Responding: Check the CR2025 battery in the remote control and replace if necessary. Ensure there are no obstructions between the remote and the light, and that the remote is above water when controlling submerged lights.
- Water Leakage: Ensure the waterproof cover is securely tightened and the waterproof ring is properly seated. If leakage persists, inspect the waterproof ring for damage and replace if needed.
7. User Tips
- For optimal battery life, turn off the lights using the remote when not in use, especially if they are not easily accessible.
- When using multiple lights, ensure they are within the remote's effective range for synchronized control.
- Consider using rechargeable CR2032 batteries for long-term cost savings and environmental benefits, if compatible with the light's design.
8. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the seller or refer to the product packaging for specific details. Keep your purchase receipt as proof of purchase.