1. Product Overview
The ludengchaoshi HJ80004 LED Bathroom Mirror Cabinet Light is a minimalist, modern lighting solution designed for bathrooms, mirror cabinets, and interior decoration. It features an aluminum lamp body for durability and an acrylic lampshade for soft, high-transmittance light. This fixture offers three selectable color temperatures to suit various moods and needs.

Figure 1: HJ80004 LED Mirror Light in a bathroom setting.

Figure 2: Key features of the lampshade and lamp body.
2. Safety Information
- Before installation, ensure the lamp body is free from damage and conduct an electrical test.
- Installation must be performed strictly according to these instructions to prevent falls, electric shock, or damage.
- Do not modify the lamp or replace parts yourself.
- Ensure the installation surface is dry and well-ventilated.
- Installation should be performed by a qualified electrician.
- Always disconnect power before cleaning or replacing light sources.
3. Setup and Installation
This fixture is designed for wall-mounted installation. Drilling is recommended for a secure and long-lasting setup.
Installation Steps:
- Prepare the Wall: Use a hammer drill to make two holes in the wall according to the dimensions of the hanging panel.
- Mount the Hanging Panel: Securely attach the hanging panel to the wall using appropriate screws and anchors.
- Wire Connection: Connect the reserved household wires to the power cable of the lamp. Ensure proper connection of Live (L) and Neutral (N) wires. If a ground wire is present in your wiring, connect it; if not, it can be left unconnected. Use electrical tape for secure insulation if wiring terminals are not used.
- Attach the Lamp: Fix the lamp body onto the mounted hanging panel using the provided screws.
- Final Check: Ensure the lamp is securely fastened and all connections are safe.

Figure 3: Detailed installation diagram.
Pre-Installation Notes:
- This lamp is suitable for 110V or 220V-240V, 50Hz power supplies, depending on the model purchased.
- Do not install on wet walls; ensure the environment is dry and ventilated.
4. Operating Instructions
The HJ80004 LED Mirror Headlight features three selectable light colors (color temperatures): White Light, Neutral Light, and Warm Light. These can typically be switched by toggling your standard light switch (on/off/on) in quick succession. Each toggle cycles through the available color temperatures.

Figure 4: Three-color dimming options (White, Neutral, Warm).
Video 1: Product demonstration showing the light fixture and color temperature changes.
5. Maintenance
To ensure safe and efficient use, regularly (every 3 months) clean and inspect the lamp.
- Cleaning: When wiping the lamp, use a soft, slightly damp cloth.
- Avoid Harsh Chemicals: Do not use hard materials or volatile substances such as gasoline, alcohol, or paint thinner for cleaning, as this may cause discoloration or damage to the lamp.
- Power Disconnection: Always disconnect the power supply before cleaning the lamp or replacing any light sources.
- Avoid Contact: Do not allow the lamp to come into contact with acidic, alkaline, or corrosive chemicals or gases.
6. Troubleshooting
If you encounter issues with your LED Bathroom Mirror Cabinet Light, please refer to the following common problems and solutions:
- Light does not turn on:
- Check if the power supply is connected and active.
- Ensure all wiring connections are secure.
- Verify that the wall switch is functioning correctly.
- Light flickers:
- Ensure the voltage supply matches the lamp's requirements (110V or 220V).
- Check for loose wiring connections.
- Color temperature does not change:
- Ensure you are toggling the switch quickly enough to cycle through the modes.
- If the issue persists, contact customer support.
For any issues not resolved by the above steps, please contact ludengchaoshi customer support.
7. Specifications
| Feature | Specification |
|---|---|
| Model Number | HJ80004 Mirror Headlight |
| Brand Name | ludengchaoshi |
| Material | Aluminum oxide wire drawing lamp body, Acrylic lampshade |
| Color | Gold |
| Light Source | LED (Bulbs Included) |
| Color Temperature | White Light, Neutral Light, Warm Light (Switchable) |
| Is Dimmable (Brightness) | No |
| Voltage | 110V or 220V-240V AC (model dependent) |
| Power Source | AC |
| Power (41cm model) | 8W |
| Power (61cm model) | 12W |
| Luminous Flux | 2000-82000 (Range) |
| Lighting Area | 10-15 square meters |
| Installation Type | Wall Mounted (Self-contained) |
| Dimensions (41cm model) | Length 41cm x Width 11.5cm x Height 5cm |
| Dimensions (61cm model) | Length 61cm x Width 11.5cm x Height 5cm |
| Distance from Wall | 9.5cm |
| Hanging Plate Hole Distance | 12cm |
| Style | Modern Style |
| Certification | FCC, CE, RoHS |
| Is Smart Device | No |
| Package Dimensions | Length 56cm x Width 16cm x Height 8cm |
| Package Weight | 0.75 kg |

Figure 5: Commodity parameters for HJ80004.
8. User Tips
- For optimal lighting, consider the size of your mirror and bathroom when choosing between the 41cm and 61cm models.
- Regular, gentle cleaning will maintain the aesthetic appeal and light quality of your fixture.
- Experiment with the three color temperatures to find the best ambiance for different times of day or activities.
9. Warranty and Support
ludengchaoshi offers a Quality Assurance warranty for its products. The specific warranty period (typically 1-3 years) depends on actual conditions and product type. For detailed warranty information or technical support, please contact the ludengchaoshi Official Store directly through your purchase platform.

Figure 6: Ludengchaoshi Official Store quality assurance.