Introduction
Thank you for purchasing the ludengchaoshi Wood Grain LED Bathroom Mirror Light. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your new mirror light. Please read this manual thoroughly before installation and and keep it for future reference.

Figure 1: Walnut-colored mirror lamp with adjustable angle installed above a round mirror.
1. Setup and Installation
1.1 Safety Precautions
- Always ensure the power supply is turned OFF at the main circuit breaker before beginning any installation or maintenance.
- Installation should be performed by a qualified electrician if you are unsure about electrical wiring.
- Do not connect the light to a power source that exceeds the specified voltage range (90-260V AC).
- Handle the light fixture with care to avoid damage.
1.2 Package Contents
Please check that all parts are present before installation:
- LED Mirror Light Fixture (main body with integrated LED)
- Mounting Hardware (screws, wall anchors)
- Instruction Manual (this document)
1.3 Installation Steps
The mirror light can be installed on top of a cabinet or directly on a wall.

Figure 2: Installation options: Cabinet top and Wall installation.
- Prepare the Installation Area: Choose a suitable location on your wall or cabinet top. Ensure there is access to electrical wiring.
- Mark Drilling Points: Use the mounting bracket (or the light's base) as a template to mark the drilling points on the wall or cabinet. The hole spacing required is between 9.5-10.5 cm.
- Drill Holes: Drill holes at the marked points. Insert wall anchors if installing on drywall.
- Secure Mounting Bracket: Attach the mounting bracket securely to the wall or cabinet using the provided screws.
- Electrical Connection: Connect the household electrical wires to the light fixture's wires. Ensure correct polarity (Live to Live, Neutral to Neutral, Ground to Ground if applicable). Use wire nuts to secure connections and ensure they are insulated.
- Mount the Light Fixture: Carefully attach the light fixture to the secured mounting bracket. Ensure it is firmly in place.
- Restore Power: Once installation is complete and all connections are secure, restore power at the main circuit breaker.

Figure 3: Detailed dimensions and installation specifications. Note the hole spacing of 9.5-10.5cm for mounting.
1.4 Adjustable Angle Demonstration
The mirror light features a three-axis adjustable design, allowing you to direct the light precisely where needed.
Video 1: Demonstration of the adjustable angles and light operation of the mirror lamp.
2. Operating Instructions
2.1 Turning On/Off
This mirror light is equipped with a Touch On/Off Switch. Simply touch the designated area on the fixture to turn the light on or off.
2.2 Light Color Temperature
The light is available in two color temperature options:
- Warm Light: 3000-3500K
- White Light: 6000-6500K
The specific color temperature of your purchased model is fixed and not adjustable after installation.
2.3 Light Direction Adjustment
The light bar can be manually adjusted along its three axes to direct illumination as desired. Gently pivot the light bar at its joints to achieve the optimal lighting angle.

Figure 4: The light features a three-axis adjustable irradiation angle.
3. Maintenance
3.1 Cleaning
- For daily cleaning, use a soft, damp cloth to gently wipe the surface of the light fixture.
- Do not use abrasive cleaners, solvents, or corrosive chemicals, as these can damage the finish and materials.
- Ensure the light is turned off and cool before cleaning.
3.2 Bulb Replacement
This fixture uses integrated LED lighting, which is designed for long-term use and does not require bulb replacement. If the LED light source fails, please contact customer support.
4. Troubleshooting
If you encounter any issues with your mirror light, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on |
|
|
| Light flickers |
|
|
If the problem persists after trying these solutions, please contact customer support.
5. Specifications
| Brand Name | ludengchaoshi |
| Model Name | LED Bathroom Mirror Light |
| Input Voltage | 90 - 260 V AC |
| Power Source | AC |
| Wattage | 42cm model: 8 watts; 57cm model: 12 watts |
| Luminous Flux | 2000-82000 Lumens |
| Color Temperature | Warm Light: 3000-3500K; White Light: 6000-6500K |
| Switch Type | Touch On/Off Switch |
| Is Dimmable | No |
| Is Bulbs Included | Yes (integrated LED) |
| Body Material | Wrought Iron |
| Shade Type | Acrylic |
| Shade Direction | Down |
| Installation Method | Assembly (Wall-mounted or Cabinet-top mounted) |
| Lighting Area | 3-5 square meters (Usage area: 4-10m²) |
| Application | Kitchen, Dining Room, Bathroom (Toilets, Bathrooms, Hotels) |
| Certifications | RoHS, CE |
| Is Smart Device | No |
| High-concerned chemical | None |
| Dimensions | Lamp Length: 42cm or 57cm; Diameter: 25mm; Base: 15cm (L) x 5cm (H); Distance from wall: <28cm |
| Product Process | Polishing and Grinding |
6. User Tips
- Power Supply: This mirror light requires a direct electrical connection (AC power, 90-260V) and does not operate on batteries. Ensure it is connected to a suitable power source.
- Optimal Placement: Utilize the adjustable angle feature to direct light precisely onto your face for grooming or to highlight specific areas of your bathroom.
- Flicker-Free Lighting: The light is designed to be flicker-free with high color rendering, providing comfortable illumination without eye strain.
7. Warranty and Support
7.1 Warranty Information
Please refer to your purchase documentation for specific warranty terms and conditions. Typically, products are covered against manufacturing defects for a specified period from the date of purchase.
7.2 Customer Support
For any questions, technical assistance, or warranty claims, please contact the seller or the ludengchaoshi customer service team through your purchase platform.
For more detailed information, you may refer to the official user manual (PDF): View User Manual (PDF)