1. Introduction
The k50 AI Mobile Cooler is designed to dissipate heat from electronic devices, ensuring optimal performance during intensive use such as gaming or prolonged video streaming. It features AI intelligent temperature control, infinitely variable speed, colorful RGB light effects, and multiple cooling modes.
Figure 1: k50 AI Mobile Cooler highlighting AI temperature control, variable speed, RGB lights, and cooling features.
2. Package Contents
Please check the package for the following items:
- k50 AI Mobile Cooler
- Type-C Data Cable
- Back Clip
- Magnetizer (for non-magnetic devices)
Figure 2: Included components: cooler, Type-C data cable, back clip, and magnetizer.
3. Setup
Follow these steps to set up your k50 AI Mobile Cooler:
- Power Connection: Connect the cooler to a 5V USB power source using the provided Type-C data cable.
- Attachment Method:
- For iPhone 12 and above (or other magnetic devices): The cooler can be directly attached magnetically to the back of your device.
- For non-magnetic devices: Attach the provided magnetizer sticker to the back of your phone or tablet. Ensure the surface is clean and dry before applying. Once the magnetizer is in place, the cooler can be magnetically attached.
- Using the Back Clip: For a secure, non-magnetic attachment, insert the back clip into the slots on either side of the cooler. Rotate the clip to lock it in place. Then, attach the cooler to your phone using the clip mechanism.
Video 1: Demonstration of cooler attachment, cooling modes, and RGB light effects.
Figure 3: The cooler attached to a phone, demonstrating its suction cooling design.
4. Operating Instructions
The k50 AI Mobile Cooler offers various cooling and lighting options:
4.1 Cooling Modes and Speed Control
- Switching Cooling Modes: Short press the power button to cycle through four cooling modes: P3 (Strongest), P2 (Strong), P1 (Low Noise), and AI (Energy-saving).
- Infinitely Variable Speed: Long press the power button to activate the 1-100 speed adjustment. You can precisely control the fan speed within the P1 to P3 range.
- AI Energy-saving Control: The AI energy-saving control system intelligently senses and maintains the optimal temperature for your device.
- Real-time Display: The digital display shows the current temperature and the active gear/speed setting.
Figure 4: Visual representation of the four cooling modes and speed adjustment.
Figure 5: The cooler's 100-speed infinitely variable transmission feature.
4.2 RGB Light Effects
- Switching Light Effects: Short press the light button to cycle through four RGB light effects: Colorful Streaming, Monochrome Streaming, Bouncing, and Breathing.
- Turning Lights On/Off: Long press the light button to turn the RGB light effects on or off.
Figure 6: The four distinct RGB light effects available on the cooler.
5. Maintenance
To ensure the longevity and optimal performance of your k50 AI Mobile Cooler, follow these maintenance guidelines:
- Cleaning: Regularly wipe the exterior of the cooler with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
- Dust Removal: Periodically check the fan and air vents for dust accumulation. Use a soft brush or compressed air to gently remove any dust.
- Storage: When not in use, store the cooler in a cool, dry place away from direct sunlight and extreme temperatures.
- Cable Care: Handle the Type-C data cable with care. Avoid bending or twisting it excessively to prevent damage.
6. Troubleshooting
If you encounter any issues with your k50 AI Mobile Cooler, please refer to the following table:
| Problem | Possible Cause | Solution |
|---|---|---|
| Cooler not turning on | No power supply or faulty cable. | Ensure the Type-C cable is securely connected to both the cooler and a 5V USB power source. Try a different USB port or cable. |
| Insufficient cooling performance | Low power input, fan speed too low, or vents blocked. | Ensure the power source provides adequate power (5V). Increase the fan speed using the infinitely variable speed control. Check and clear any obstructions from the air vents. |
| RGB lights not working | Lights turned off or a malfunction. | Long press the light button to toggle the RGB lights. If still not working, ensure the cooler is powered on. |
| Digital display not showing temperature/gear | Cooler not powered on or display malfunction. | Ensure the cooler is powered on. If the issue persists, contact support. |
7. Specifications
| Feature | Detail |
|---|---|
| Product Name | Heat Sink (k50 AI Mobile Cooler) |
| Purpose | To dissipate heat from electronic devices |
| Usage | USB plug-in use |
| Power Supply Voltage | 5V |
| Fixed Method | Magnetic / Back Clip Type |
| Cooling Technology | Ice Cooling Radiator with Suction Cooling |
| Fan Speed Control | Infinitely Variable (1-100 speeds) |
| Temperature Control | AI Intelligent Temperature Control |
| Lighting | Digital Display, RGB Light (4 effects) |
| Dimensions (L x W x H) | 9 cm x 8 cm x 4 cm (approximate) |
| Weight | 0.127 kg (approximate) |
| Battery | No (external power required) |
| Origin | Mainland China |
8. User Tips
- Check Package Contents: Upon receiving your cooler, carefully check all package contents against the list in Section 2 to ensure nothing is missing.
- Optimal Power Supply: For the best cooling performance, ensure your USB power source provides sufficient and stable 5V power. Inadequate power can lead to reduced cooling effectiveness.
- Magnetic Attachment: If your phone is not magnetic, remember to use the provided magnetizer sticker for secure attachment.
- Hands-Free Cooling: The cooler's design ensures four-side suction air without blowing directly onto your hands, maintaining a comfortable grip during use.
9. Warranty and Support
This product is covered by a standard manufacturer's warranty. For any warranty claims, technical support, or further inquiries, please contact the seller or refer to the official product page.
An additional user manual in PDF format is available for download: View User Manual (PDF)