Safety Information ⚠
Warning: Electrical products involve potential risks of electric shock, fire, and personal injury if installed or used improperly. All operations related to this product, including installation, maintenance, and replacement, must be performed in strict accordance with the requirements of this manual, relevant EU directives, harmonized standards, and local electrical codes. Failure to comply with the safety regulations and operating instructions may result in serious consequences such as electric shock, fire, or product damage, and the manufacturer shall not be liable for any losses arising therefrom.
- For Professional Installation Only: Installation must be performed by a qualified electrician in accordance with IEC 60364 wiring regulations and local electrical codes.
- Voltage & Current Compatibility: Use this product only with AC supply voltage up to 250V and rated current not exceeding 16A (sockets) /16A (switches) or as marked on the product.
- Protection Against Electric Shock: Do not touch live parts. Ensure power is disconnected before installation or maintenance. Keep children away from the product; the socket is equipped with a child-resistant shutter that requires a minimum force of 40N for operation.
- Environmental Restrictions: Avoid installation in humid environments (unless marked with IPX4 or higher protection rating) or areas exposed to direct sunlight, high temperatures, or corrosive substances.
- Fire Safety: The product housing is made of V-1 grade flame-retardant material that passes the 850°C glow wire test. Do not cover the product during use to prevent overheating.
Product Overview
Key Features
- Complies with EN 60669-1:2021 (switches) and EN 60884-1:2013+A1:2015+A2:2019 (sockets) harmonized standards.
- Socket with child-resistant shutter design to prevent single-pole insertion.
- Switch with mechanical durability of 40,000 operating cycles and terminal temperature rise limited to ≤45K.
- Phosphor bronze contact components ensuring stable electrical connection and corrosion resistance.
Symbol Explanation
CE Mark: The CE mark is a safety compliance mark, not a quality compliance mark. It constitutes the "main requirement" at the core of European directives.
UKCA Mark: UKCA (UK Conformity Assessed) is the abbreviation for the UK Conformity Assessment Mark. This is a UK product mark, indicating that the product has been certified (according to BS standards) to meet the relevant regulatory requirements of the UK market.
Video: Product showcase of Wallpad EU Standard Switches and Sockets, demonstrating various types and features.
Specifications
| Parameter | Specification |
|---|---|
| Brand | Wallpad |
| Series | EU PC Series |
| Material | PC (Plastic) |
| Panel Size | 84 x 84 mm |
| Installation Distance | 60 mm |
| Rated Voltage | 110-250V AC, 50/60Hz |
| Rated Current (Sockets) | 10A / 16A |
| Rated Current (Switches) | 10A / 16A / 20A / 45A |
| Rated Power | 2500W (for switches) |
| Insulation Voltage | 2000V AC (1 minute without breakdown) |
| Protection Rating | IP20 (standard) / IPX4 (waterproof version) |
| Mechanical Life (Sockets) | 5000 insertion/extraction cycles |
| Mechanical Life (Switches) | 40,000 operating cycles |
| Flame Retardancy | V-1 grade (IEC 60695-11-10) |
| Certification | CE, CCC |

Image: Product parameter diagram with dimensions and key specifications.
Setup: Installation Instructions
Preparation
- Verify that the installation environment meets the product's protection rating requirements.
- Check that the product is undamaged and all components are intact before installation.
- Prepare tools including screwdrivers, wire strippers, and voltage testers.
Wiring Steps
- Turn off the main power supply and confirm no voltage with a tester.
- Strip the wire insulation (8-10mm) without damaging the conductor.
- For sockets: Connect the live wire (L) to the terminal marked "L", neutral wire (N) to "N", and protective earth (PE) to the earth terminal (green-yellow wire). Ensure wire connections are secure with no loose strands.
- For switches: Connect the input live wire to the "IN" terminal and the output wire to the "OUT" terminal.
- Fix the product to the mounting box using the provided screws, ensuring it is firmly attached without tilting.
- Install the front panel and tighten the fixing screws gently.

Image: Rear view of the switch/socket module, illustrating the terminal connections for wiring.

Image: Diagram showing the back dimensions (84x84mm, 60mm installation distance) and compatibility with an EU round mounting box.

Image: Visual representation of the switch being installed into a standard EU round wall box.
Wiring Diagram Reference
The manual provides detailed wiring diagrams for various configurations:
- Power Socket: Shows Live (L), Neutral (N), and Grounding wires connected to the respective terminals.
- 1 Way Switch: Illustrates Live wire connected to 'L' and output to 'L1' for controlling a single light.
- 2 Way Switch: Depicts two switches controlling one light, with Live connected to 'L' on the first switch, and 'L1'/'L2' connecting to 'L1'/'L2' on the second switch, which then connects to the light.
- Intermediate Switch: Shows a more complex setup with two 2-way switches and an intermediate switch in between, allowing control from three locations.
Post-Installation Check
- Confirm all wiring is correct and terminals are tightened.
- Restore power and test the switch operation and socket functionality with a compatible device.
- Check for abnormal heating, sparking, or unusual noise during operation.
Operating Instructions
Switch Operation
- Toggle the switch to the "ON" (I) position for power supply and "OFF" (O) position to cut off power.
- For illuminated switches, the indicator light will be on when the switch is in the "OFF" position (if applicable).
- Do not toggle the switch frequently in a short period to avoid damage to the internal mechanical structure.

Image: A hand demonstrating the operation of the rocker button switch.
Socket Usage
- Insert the plug firmly into the socket until it clicks into place, indicating that the child-resistant shutter is fully opened and the connection is secure.
- Do not force the plug or use adapters that do not comply with EN 50075.
- When pulling out the plug, hold the plug body and pull it straight out; do not pull the power cord to avoid damaging the cord or the socket.
Maintenance
Regular Maintenance
- Inspect the product quarterly for signs of damage, loose connections, or discoloration.
- Clean the surface with a dry, soft cloth; do not use water, gasoline, alcohol, or other chemical cleaners that may corrode the product housing.
- If dust accumulates in the socket hole, use a dry brush to clean it gently.
Replacement Criteria
Replace the product immediately if any of the following occurs:
- Damaged housing, loose terminals, failed shutter function.
- Abnormal heating during use, sparking when switching on/off.
- The switch cannot stay in the on/off position stably.
Troubleshooting
If you experience any issues with your Wallpad switch or socket, please consider the following:
- Ensure all wiring connections are secure and correctly made according to the wiring diagrams.
- Verify that the power supply to the circuit is active.
- Check for any visible damage to the product or connected devices.
- If the issue persists, consult a qualified electrician or contact Wallpad customer support.
User Tips
- Users appreciate the aesthetic design and functionality of the Wallpad switches and sockets, noting their practical use and good quality.
- The black panel features a matte finish, which is preferred by users seeking a non-glossy appearance.
Warranty & Support
Warranty Information
The product comes with a 2-year warranty from the date of purchase. The warranty covers manufacturing defects but does not include damage caused by improper installation, misuse, modification, or normal wear and tear. For warranty claims, please contact the manufacturer with the original purchase receipt and product serial number.
Manufacturer Information
- Manufacturer: WenZhou Wallpad Electric Co.,LTD
- Address: No.86 Jin Feng Xi Lu, Tian He Street, Long Wan Qu, Wen Zhou City, Zhejiang Province, China
- Postal Code: 325000
EU Authorized Representative
- Company: Humiss International B.V.
- Region: European Union
- Country: Netherlands
- Address: Joop Geesinkweg 701, Amsterdam-Duivendrecht, the Netherlands
Contact Information
- Manufacturer Phone: 86-15167890330
- Manufacturer Email: 278907249@qq.com
- EU Representative Phone: +31-(0)20 369 8116
- EU Representative Email: business@humiss.com