1. Introduction
This manual provides instructions for the installation, operation, and maintenance of your Passive Air Vent Adjustable Airflow Through Wall Ventilation Kit. This product is designed to provide efficient two-way ventilation, improve indoor air quality, and prevent dust, insects, and rainwater from entering your living space.
2. Safety Information
- WARNING: To avoid danger of suffocation, keep any plastic packaging bags away from babies and children.
- Ensure all installation steps are followed carefully to prevent damage to the product or property.
- Do not modify the product in any way not described in this manual.
3. Product Components
The Passive Air Vent kit includes the following main components:
- Square adjustable air outlet cover
- Filter tank
- Square adjustable air outlet duct (telescopic)
- Self-adhesive tampon liners
- Square louver air outlet duct (telescopic)
- Square louver air outlet cover
- Mounting Screws (8 pieces)
4. Setup and Installation
This passive air vent is designed for through-wall installation and requires a hole opening size of approximately 110mm (4.33in). It is suitable for wall thicknesses between 185mm and 335mm.
- Prepare the Wall Opening: Drill a hole of approximately 110mm (4.33in) diameter through the wall at the desired installation location. Ensure the wall thickness is between 185mm and 335mm.
- Adjust Duct Length: The duct is telescopic. Adjust its length to match the exact thickness of your wall. This ensures a snug fit and optimal performance.
Figure 2: The telescopic duct can be freely adjusted to fit various wall thicknesses. - Insert the Duct: Carefully insert the adjusted telescopic duct into the prepared wall opening.
- Attach Covers: Secure the square adjustable air outlet cover (indoor side) and the square louver air outlet cover (outdoor side) to the wall using the provided 8 screws. Ensure the louvered cover is positioned correctly to prevent rainwater entry.
- Final Check: Verify that the vent is securely mounted and that the telescopic duct is fully extended to the wall thickness, creating a sealed connection.
Figure 3: Assembled passive air vent with mounting screws visible.
5. Operating Instructions
The Passive Air Vent allows for adjustable airflow to suit your needs.
- Adjusting Airflow: The indoor air outlet cover features a twist-off lid. Rotate this lid to adjust the indoor air volume. The vent offers a two-speed adjustment for controlling airflow as desired.
Figure 4: Open the twist-off lid to adjust the airflow. The indoor air volume can be set with two-speed adjustment. - Rain Protection: The outdoor louvered cover is designed with slanted louvers to effectively prevent rainwater from flooding in, ensuring continuous ventilation even during adverse weather conditions.
Figure 5: Slanted louvers effectively prevent rainwater from entering the vent.
6. Maintenance
The passive air intake vent includes a built-in filter to effectively filter out flying dust and prevent debris from entering. Regular cleaning of this filter is recommended to maintain optimal air quality and airflow.
- Filter Cleaning: Periodically remove the filter tank (refer to Figure 1 for location) and clean the filter element. Depending on environmental conditions, cleaning may be required more frequently.
- Exterior Cleaning: Wipe the exterior surfaces of the vent covers with a soft, damp cloth as needed to remove dust and dirt.
- Do not use abrasive cleaners or solvents, as these may damage the ABS material.
7. Troubleshooting
No specific troubleshooting steps are provided for this product. If you encounter issues, please ensure the installation steps were followed correctly and that the duct is clear of obstructions. For further assistance, contact customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Product Name | Passive Air Vent Adjustable Airflow Through Wall Ventilation Kit |
| Model | 10142600101 |
| Brand | Aramox |
| Type | Air Conditioning (Ventilation) |
| Material | ABS |
| Required Hole Size | Approx. 110mm / 4.33in |
| Suitable Wall Thickness | 185-335mm |
| Overall Length (Extended) | 340mm / 13.39in |
| Overall Length (Compressed) | 180mm / 7.09in |
| Outer Cover Dimensions | 140mm / 5.51in (Square) |
| Duct Diameter | 108mm / 4.25in |
| Filter Thickness | 11.5mm / 0.45in |
9. User Tips
Based on general usage of similar products:
- For optimal performance, ensure the telescopic duct is fully extended and sealed against the wall to prevent air leakage.
- Regularly check the outdoor louvered cover for any debris (leaves, dirt) that might obstruct airflow.
- Consider the prevailing wind direction when installing the outdoor louvered cover to maximize its rain protection effectiveness.
10. Warranty and Support
This product comes with standard manufacturer support. For any inquiries or issues, please contact the manufacturer or their authorized representative:
Manufacturer Information:
- Company Name: Shenzhen Thirteen Shun Technology Co., Ltd
- Address: 31C, Building 1, Julonghua Mansion, No. 109 Heping Road, Sanlian Community, Longhua Street, Longhua District, Shenzhen, Guangdong Province, China
- Email: 252859548@qq.com
- Telephone: 86-19165566796
EU Authorized Representative:
- Company Name: Nenninger GmbH
- Address: Friedrichstr. 95, 10117 Berlin, Germany
- Email: nenningerde@gmail.com
- Telephone: 49-30555777073
For a detailed user manual in PDF format, please refer to the official document: User Manual (PDF).