Lemorele R1100

Contents

Lemorele R1100 Wireless HDMI Transmitter and Receiver

User Instruction Manual

1. Introduction

The Lemorele R1100 is a 5G wireless HDMI video transmission kit designed for professional and home use, offering high-definition video transmission with low latency. This kit allows you to wirelessly transmit 1080P@60Hz video signals up to 200 meters (656 feet) in an open environment, making it ideal for various applications including live streaming, monitoring, and presentations.

The system supports one transmitter (TX) to multiple receivers (RX), with up to four receivers simultaneously, and also features real-time monitoring via a mobile application.

Video: Lemorele R1100 Product Overview

2. Package Contents

Please check the package contents upon unboxing. If any items are missing or damaged, please contact customer support.

Lemorele R1100 Packing List

Image: Contents of the Lemorele R1100 package.

  • 1 x Wireless Transmitter (TX)
  • 1 x Wireless Receiver (RX) - Note: RX cannot be used alone; it requires a TX unit.
  • 4 x Antennas
  • 1 x Cold Shoe Mount
  • 2 x USB-C Cables
  • 1 x User Manual (Model: R1100)

3. Component Identification

Familiarize yourself with the ports and buttons on both the Transmitter (TX) and Receiver (RX) units.

Lemorele R1100 Transmitter and Receiver Ports

Image: Detailed view of the Transmitter and Receiver units, highlighting ports and power options.

Transmitter (TX) Unit:

  • HDMI Input: Connects to your video source (camera, PC, etc.).
  • HDMI Output: For local monitoring (loop-out).
  • USB-C Port: For power supply (5V/2A).
  • Battery Slot: For NP-F series batteries (F970/F750/F550, battery not included).
  • LCD Display: Shows status information.
  • Power Button: To turn the unit on/off.

Receiver (RX) Unit:

  • HDMI Output: Connects to your display device (monitor, TV, projector).
  • USB-C Port: For power supply (5V/2A).
  • Battery Slot: For NP-F series batteries (F970/F750/F550, battery not included).
  • LCD Display: Shows status information.
  • Power Button: To turn the unit on/off.
  • Pairing Button: Used for pairing TX and RX units.

4. Setup Instructions

4.1 Power Supply

Both the TX and RX units can be powered by two methods:

  • USB-C Power: Connect the provided USB-C cable to the USB-C port on the unit and to a 5V/2A power adapter (not included) or a power bank.
  • NP-F Battery: Insert a compatible NP-F series battery (F970, F750, or F550, not included) into the battery slot on the back of the unit.

4.2 Antenna Installation

Screw the four provided antennas firmly onto the antenna ports on both the TX and RX units. Ensure they are securely attached for optimal signal transmission.

4.3 Connecting the Transmitter (TX)

  1. Connect your video source (e.g., camera, laptop, PC) to the HDMI Input port of the TX unit using an HDMI cable.
  2. (Optional) If you need local monitoring, connect a monitor to the HDMI Output (loop-out) port of the TX unit.
  3. Power on the TX unit using one of the methods described in 4.1.
Lemorele R1100 HDMI Loop Out Connection

Image: Transmitter (TX) connected to a camera with HDMI input and loop-out to a monitor.

4.4 Connecting the Receiver (RX)

  1. Connect your display device (e.g., monitor, TV, projector) to the HDMI Output port of the RX unit using an HDMI cable.
  2. Power on the RX unit using one of the methods described in 4.1.

4.5 Pairing TX and RX Units

Typically, the TX and RX units come pre-paired. If they do not connect automatically or if you are pairing additional RX units:

  1. Ensure both TX and RX units are powered on.
  2. Press the Pairing Button on the RX unit. The LCD display will indicate pairing mode.
  3. The units should automatically connect. The LCD display on both units will show a stable connection status.

5. Operating Instructions

5.1 Basic Operation

  1. After completing the setup and connections, power on both the TX and RX units.
  2. Ensure your video source is active and your display device is turned on and set to the correct HDMI input.
  3. The video signal from the TX will be wirelessly transmitted to the RX and displayed on the connected monitor.

5.2 Multi-Receiver Setup (1 TX to 4 RX)

The Lemorele R1100 system supports connecting one Transmitter (TX) to up to four Receivers (RX) simultaneously. This allows for multi-angle monitoring or displaying the same content on multiple screens.

  1. Set up the primary TX unit as described in 4.3.
  2. Connect and power on each additional RX unit as described in 4.4.
  3. Pair each additional RX unit with the TX unit as described in 4.5.
Lemorele R1100 Multi-Device Monitoring

Image: Example setup showing one TX transmitting to four RX units for multi-screen monitoring.

5.3 Mobile App Monitoring (TUTUPlay)

The system supports real-time video monitoring on mobile devices via the


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.