Recordio GAW-J17

Contents

Recordio GAW-J17 N36 Wireless Microphone System User Manual

Professional True Diversity Wireless Digital Handheld Microphone with Built-in Battery

1. Product Overview

The Recordio GAW-J17 N36 wireless handheld microphone system is specifically designed for outdoor use. It incorporates true diversity reception technology, offering both an ultra-long transmission range and high-fidelity sound quality. Both the receiver and handheld microphones feature built-in rechargeable lithium batteries, enabling independent operation without the need for external power sources. This system is convenient to use and provides stable performance, making it ideal for outdoor performances, street shows, event explanations, stage singing, outdoor meetings, and various other outdoor scenarios. It effectively addresses common issues such as lack of outdoor power, unstable signals, and compromised sound quality.

Recordio GAW-J17 N36 Wireless Microphone System

Image: The Recordio GAW-J17 N36 Wireless Microphone System, showing the receiver unit and two handheld microphones.

2. Key Features

  • True Diversity Reception Technology: Features intelligent dual-antenna switching design that automatically locks onto the strongest signal, effectively eliminating signal dropouts, dead spots, and feedback. It offers strong anti-interference capabilities, ensuring stable signal transmission over long distances even in complex outdoor environments.
  • Ultra-Long Transmission Distance: In open, unobstructed outdoor environments, the transmission distance significantly surpasses that of ordinary wireless microphones. It maintains stable sound pickup even with minor obstructions like trees or low buildings, suitable for large outdoor areas.
  • High-Fidelity Sound Quality: Equipped with a professional dynamic microphone capsule for high vocal reproduction, delivering a full and transparent tone with stable low frequencies and clear high frequencies. It effectively suppresses environmental noise, providing clear and clean sound quality for both singing and speech.
  • Built-in Rechargeable Battery: Both the receiver and handheld microphones are equipped with large-capacity lithium batteries, eliminating the need for power outlets. They can be used directly in outdoor environments without power. The universal Type-C charging interface is compatible with mobile phone charging cables and power banks for convenient charging.
  • Strong Outdoor Adaptability: The durable body structure is drop-resistant and wear-resistant, capable of adapting to complex outdoor conditions involving wind, sand, and temperature fluctuations. Its long-lasting battery life ensures a full day of outdoor use on a single charge, reducing the need for frequent recharging.
  • Multi-Device Compatibility: Supports both 6.35mm professional audio and 3.5mm dual-channel universal interfaces, allowing easy connection to most audio equipment such as outdoor speakers, amplifiers, mixers, and live streaming devices, suitable for various outdoor use scenarios.
Applications of the wireless microphone system

Image: Various applications for the microphone system, including school/teaching speech, bar/stage performance, meeting/chair, and family/friend gathering.

3. Package Contents

The package includes the following items:

  • 1x Receiver Unit
  • 2x Handheld Microphones
  • 1x User Manual
  • 2x 6.35mm Audio Cables
  • 1x USB Type-C Charging Cable
  • 1x Power Adapter

Video: Unboxing and overview of the Recordio GAW-J17 N36 Wireless Microphone System components.

Package contents of the wireless microphone system

Image: All items included in the product package, laid out on a white surface.

4. Setup and Installation

4.1 Power On and Pairing

  1. Power On Receiver: Long press the receiver's power button for 3 seconds. After powering on, it will enter standby reception state, and the indicator light will glow solid green.
  2. Power On Microphone: Long press the handheld microphone's power button for 3 seconds. After powering on, the microphone will automatically enter infrared pairing mode, and its indicator light will flash.
  3. Infrared Pairing: Align the infrared pairing interface of the handheld microphone with the infrared receiver port of the receiver. Maintain a distance of 5-10cm. Wait 3-5 seconds. After successful pairing, both the receiver and microphone indicator lights will turn solid green, indicating normal sound pickup.
  4. Automatic Frequency Search (Receiver): Press and hold the SET button on the receiver. The display screen's channel and frequency will start flashing, initiating an automatic frequency search to find interference-free frequencies for greater stability.
  5. Frequency Locking (Receiver): Long press the 'CH: A/B' key on the receiver to lock the display screen and buttons, preventing accidental touch operation.
Automatic frequency search diagram

Image: Diagram illustrating the automatic frequency search function on the receiver, showing the SET button and flashing channel/frequency display.

Frequency locking function diagram

Image: Diagram showing the frequency locking function, highlighting the lock screen icon and lock screen button on the receiver.

Infrared frequency matching diagram

Image: Diagram showing the infrared frequency matching process between the microphone and receiver.

5. Operating Instructions

5.1 Volume and Gain Adjustment

  • Receiver Gain Adjustment: Adjust the gain knob on the receiver within the -18dB to +20dB range. Adapt the gain according to the outdoor ambient volume and vocal intensity to prevent audio clipping (distortion) or insufficient volume leading to noise.
  • Microphone Gain Adjustment: The microphone features a gain adjustment button on its side, allowing adjustments in 3dB steps (0-21dB). This enables individual optimization of vocal pickup sensitivity, adapting to different vocal intensities to ensure clear sound quality.

5.2 Outdoor Connection Methods

  • Connecting to Outdoor Speakers/Amplifiers: Use a 6.35mm audio cable. Insert one end into the receiver's 6.35mm balanced output and the other end into the audio input of an outdoor speaker or amplifier. Adjust the volume as needed for optimal sound.
  • Connecting to Live Streaming/Recording Devices: Use a 3.5mm audio cable. Insert one end into the receiver's 3.5mm dual-channel output and the other end into the audio input of a live sound card, mobile phone, or other recording/streaming device. This setup is suitable for outdoor live streaming and recording needs.
Outdoor performance connection diagram

Image: Diagram showing how to connect the receiver to a pull rod speaker for outdoor performance, also indicating connection to a portable power bank.

Indoor KTV connection diagram

Image: Diagram illustrating connection methods for indoor KTV, showing the receiver connected to a jukebox, audio and video speakers, and a power amplifier.

6. Charging

6.1 Receiver Charging

Use a Type-C charging cable. Connect one end to the receiver's charging port and the other to a 5V/1A power adapter or power bank. The indicator light will be red during charging and turn green when fully charged. Charging takes approximately 8 hours.

Rechargeable receiver diagram

Image: Diagram of the rechargeable receiver, highlighting the Type-C charging port and indicating a 5000mAh battery with 8 hours charging time for 16 hours of battery life.

6.2 Handheld Microphone Charging

The handheld microphone can be charged directly via a Type-C charging cable. Alternatively, the removable 18650 lithium battery can be taken out and charged with a dedicated charger. Charging takes approximately 6 hours. For extended outdoor use, spare batteries can be rotated.

6.3 Low Battery Indicator

When the device battery is low, the indicator light will flash red, and the volume may slightly attenuate. It is highly recommended to fully charge the devices before any outdoor use to avoid affecting performance.

7. Outdoor Use Precautions

  • Water Resistance: The device does not have built-in waterproof capabilities. In rainy or stormy weather, ensure proper shielding and protection to prevent water from entering and damaging internal components. After use in sandy or dusty conditions, wipe the body and interfaces with a dry, soft cloth to prevent sand and dust ingress.
  • Obstructions: It is recommended to use the system in open, unobstructed environments. Obstructions such as buildings, trees, and walls can slightly attenuate the transmission distance. Avoid significant physical barriers between the receiver and microphones during operation.
  • Interference: Keep the system away from high-power radio stations, base stations, and other wireless devices operating on the same frequency band. This helps prevent signal interference that could lead to noise or signal dropouts, ensuring stable sound quality and signal integrity.
  • Temperature: In high-temperature outdoor environments, avoid prolonged exposure of the device to direct sunlight. Store the system in a cool, well-ventilated place to prevent the lithium battery from overheating, which can damage the battery and shorten the device's overall lifespan.

8. Maintenance and Care

  • Cleaning: Only use a dry, soft cloth to wipe the device body, interfaces, and microphone head. Do not use alcohol or corrosive liquids, as these can damage the device's surface and internal components.
  • Battery Maintenance: Avoid overcharging and over-discharging the lithium battery. Always unplug the charging cable promptly once charging is complete. When storing removable batteries, ensure they are protected from short circuits and physical collisions.
  • Interface Maintenance: Regularly inspect the audio and charging interfaces for any dust or debris blockage. If blockages are found, gently clean them with a dry cotton swab.
  • No Disassembly: Do not attempt to disassemble the receiver, handheld microphone, or lithium battery. Disassembly will damage the device's structure and void the warranty. If any malfunction occurs, please contact professional service personnel for repair.

9. Troubleshooting

Common Problem Solution
Pairing Failure / No Sound
  1. Ensure both the receiver and microphone are powered on.
  2. Align the infrared pairing interfaces, keep a distance of 5-10cm, and attempt to re-pair.
  3. Check the battery levels of both devices; low battery may cause pairing failure.
Signal Dropout / Noise during Transmission
  1. Reduce obstructions between devices; move to an open environment if possible.
  2. Stay away from potential interference sources (e.g., high-power radio stations, base stations, other wireless devices on the same frequency).
  3. Adjust the receiver and microphone gain; excessive gain can sometimes introduce noise.
Volume Too Low or Clipping (Distortion)
  1. Adjust the receiver gain and the connected speaker/amplifier volume.
  2. Adjust the microphone gain; avoid setting it too high (causing clipping) or too low (resulting in faint sound).
  3. Verify that the audio cable connection is secure and properly inserted.
Unable to Charge
  1. Check if the charging cable and power adapter are functioning correctly.
  2. Inspect the charging port for any dust or blockage; clean it if necessary and reconnect.
  3. If the lithium battery has been left unused for an extended period, it might be difficult to charge initially. Try short, repeated charging attempts to reactivate it.

10. Specifications

10.1 Receiver (GAW-J17)

Parameter Specification
Dimensions115 × 130 × 42mm
Weight251.5g
Shell MaterialDurable plastic
Power SupplyDC5V/1A
Battery TypeBuilt-in 5000mAh lithium battery
Battery LifeApprox. 16 hours (fully charged)
Charging TimeApprox. 8 hours
Charging PortType-C universal interface
Reception ModeTrue diversity reception
Spurious Rejection>80dB (typical value)
Gain Adjustable Range-18dB ~ +20dB
Audio Output Interface6.35mm balanced output, 3.5mm dual-channel stereo output
Receiver specifications table

Image: Detailed technical specifications for the receiver unit.

10.2 Handheld Microphone (N36)

Parameter Specification
Dimensions264 × 54mm
Weight309g
Shell MaterialHigh-strength aluminum alloy (drop-resistant, wear-resistant)
Power SupplyDC5V/1A charging
Battery TypeRemovable 18650 rechargeable lithium battery (2200mAh)
Battery LifeApprox. 10-15 hours (fully charged)
Charging TimeApprox. 6 hours
Charging PortType-C universal interface
Transmit Power1mW or 10mW (two adjustable levels)
Occupied Bandwidth<200 kHz
Microphone Gain Offset Range0-21dB (3dB step precise adjustment)
Receiving ModeInfrared reception
Microphone PickupDynamic coil type
Microphone specifications table

Image: Detailed technical specifications for the handheld microphone.

11. User Tips

  • Always ensure both the receiver and microphones are fully charged before any extended outdoor use to prevent unexpected power loss.
  • For optimal signal quality and range, try to maintain a clear line of sight between the receiver and microphones, minimizing obstructions like buildings or dense foliage.
  • Regularly clean the charging and audio ports with a dry cotton swab to prevent dust and debris from affecting connectivity and charging efficiency.
  • When experiencing signal issues, first try the automatic frequency search function on the receiver to find a clearer channel.
  • If using the microphone in a very loud environment, adjust the gain settings carefully to avoid clipping, and if in a quiet environment, increase gain to ensure clear pickup.

12. Warranty and Support

This product comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please note that disassembling the microphone privately will void the one-year warranty.

If you receive a damaged or incorrect item, or encounter any issues during use, please contact customer support immediately. Do not attempt to repair the device yourself, as unauthorized repairs will void the warranty.

For additional information and detailed instructions, you may refer to the official user manual PDF: View User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.