1. Product Overview
The HT-19 is a professional, precise, and efficient handheld infrared thermal imager designed for various applications including industrial construction, fault detection, leak detection, car engine overhaul, transformer room line maintenance, and air conditioner repair. It features a 3.2-inch full-color screen and a 320x240 infrared image resolution, allowing for detailed visualization of thermal distributions.

Figure 1: HT-19 Handheld Thermal Imager
Video 1: Product Overview and Features
2. Package Contents
Before first use, please check the contents of your package:
- 1 x HT-19 Infrared Temperature Detector
- 1 x USB Cable
- 1 x User Manual
- 1 x Carry Pouch
- 1 x Carry Pouch Strap
- 1 x Cardboard Package Box

Figure 2: HT-19 Package Contents
3. Setup
3.1. Charging the Device
The HT-19 features a built-in rechargeable 18650 battery. Before initial use, fully charge the device using the provided USB cable and charger. Connect the USB cable to the Micro USB 2.0 port on the device and plug the charger into a power outlet.

Figure 3: Various Charger Plug Types
3.2. Powering On/Off
To power on the device, press and hold the On/Off key (usually located below the screen). To power off, press and hold the same key until the device shuts down.
3.3. Initial Language Selection
Upon first power-on or after a reset, you may be prompted to select a language. Use the navigation keys to select your preferred language (e.g., English, Chinese, Italian, German) and press 'Enter'.

Figure 4: Language Selection Menu
4. Operating Instructions
4.1. Device Controls
Familiarize yourself with the device's controls:
- On/Off Key: Powers the device on or off.
- Menu Key: Accesses the main menu.
- Select Key: Used to select options within menus.
- Enter Key: Confirms selections.
- Navigation Keys (Up, Down, Left, Right): Navigate through menus and adjust settings.
- Image Capture Key: Triggers image capture (located on the handle).
- Micro USB 2.0 Port: For charging and data transfer.

Figure 5: HT-19 Device Controls and Components

Figure 6: HT-19 in Hand, Demonstrating Ergonomics

Figure 7: Top View of HT-19, Showing Image Capture Trigger
4.2. Temperature Measurement
Point the imager towards the target object. The screen will display the thermal image and temperature readings. The device has a temperature range of -20℃ to 300℃ (-4℉ to 572℉) with an accuracy of ±2% or ±2℃ (±4℉).
4.3. Palette Selection
The HT-19 offers 5 types of color palettes to visualize thermal data: Rainbow, Iron Red, Cold Color, Black & White, and White & Black. Access the menu to select your preferred palette for different viewing needs.
4.4. Image Capture and Storage
To capture an image, press the Image Capture Key on the handle. Images are saved to the built-in 4GB SD card in JPG format. You can review captured images through the device's menu.
4.5. Auto Power-off Settings
To conserve battery life, the device can be set to automatically power off after a period of inactivity. Options include 5 minutes, 20 minutes, or disabling auto power-off. Adjust this setting in the device menu.
4.6. Product Applications
The HT-19 is versatile and can be used for:
- Detection of Floor Heating Hot Water Pipes
- Fault Detection of Distribution Boxes
- Automobile Fault Detection
- Fault Detection of Electrical Equipment
- Motor Fault Detection
- Power Fault Inspection

Figure 8: Examples of HT-19 Product Applications
5. Maintenance
5.1. Cleaning
- Screen: Use a soft, lint-free cloth to gently wipe the screen. Do not use abrasive cleaners.
- Lens: For the infrared lens and visible light camera lens, use a lens cleaning cloth and solution designed for optics. Avoid touching the lens directly with fingers.
- Device Body: Wipe the device body with a soft, damp cloth. Do not immerse the device in water.
5.2. Storage
When not in use, store the HT-19 in its carry pouch in a cool, dry place. Avoid extreme temperatures and high humidity.
- Storage Temperature: -20℃ to 50℃ (-4℉ to 122℉)
- Relative Humidity: 10%RH to 80%RH
6. Troubleshooting
If you encounter issues with your HT-19, try the following basic troubleshooting steps:
- Device does not power on: Ensure the battery is fully charged. Try connecting the device to the charger and attempting to power on again.
- Screen is blank or frozen: Try restarting the device by holding down the On/Off key. If unresponsive, allow the battery to fully discharge and then recharge before attempting to power on again.
- Inaccurate temperature readings: Ensure the lens is clean and unobstructed. Check the emissivity setting in the menu; adjust it according to the material being measured for more accurate results.
For persistent issues, please refer to the support section.
7. Specifications
| Feature | Specification |
|---|---|
| Model | HT-19 |
| Display | 3.2'' full-color screen |
| Infrared Image Resolution | 320*240 |
| Total Pixel | 76,800 pixels |
| Visible Image Resolution | 0.3 mega pixels |
| Thermal Sensitivity | 0.07° |
| Temperature Range | -20℃ to 300℃ (-4℉ to 572℉) |
| Measuring Accuracy | ±2% or ±2℃ (±4℉) |
| FOV/Shortest Focal Length | 27°×35°/0.5m |
| Wavelength Range | 8-14μm |
| Emissivity | 0.1-10.0 Adjustable |
| Image Frequency | 9HZ |
| Focus Mode | Fixed |
| Vision Option | 5 kinds of full infrared to full visual, mixing visible and infrared |
| Image Storage | SD card (4GB) |
| File Format | JPG |
| Battery Supply | Built-in chargeable 18650 |
| USB | Micro USB2.0 |
| Auto Power-off Time | 5 minutes/20 minutes/not power off automatically |
| Authentication | CE, RoHS |
| Operating Temperature | -5℃ to 40℃ (23℉ to 104℉) |
| Storage Temperature | -20℃ to 50℃ (-4℉ to 122℉) |
| Relative Humidity | 10%RH to 80%RH |
| Item Size | 223×105×90mm |
| Item Weight | 289g |
8. User Tips
No specific user tips or common questions were available for this product.
9. Warranty and Support
For warranty information or technical support, please contact the seller or authorized distributor from whom you purchased this product. Keep your proof of purchase for warranty claims.