1. Introduction
The XFOX Tuya Multi-mode Smart Gateway is a mini Zigbee Gateway designed to be the central hub for your smart home system. It integrates a highly efficient Wi-Fi module, a low power-consuming ZigBee module, and PCBA. This gateway allows seamless connection to the Smart Life app for device adding, resetting, third-party control, and ZigBee group control, meeting diverse smart home requirements.
It supports multiple communication methods including Bluetooth-Compatible, Zigbee, and Wi-Fi, enabling you to manage a wide array of smart devices.

2. Safety Information & Compliance
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Attention: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this product does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
CE Notice
CE Products with the CE marking comply with the Radio Equipment Directive (2014/53/EU), the Electromagnetic Compatibility Directive (2014/30/EU), and the Low Voltage Directive (2014/35/EU) issued by the Commission of the European. Compliance with these directives implies conformity to the following European Standards:
- EN300328 V2.1.1
- EN301489-1/-17 V2.1.1
- EN62368-1:2014+A11:2017
- EN55032:2015+AC:2016(ClassB)
- EN55035:2017
- EN62311:2008
3. Product Overview

Indicators and Controls

- Red Indicator: Wi-Fi status indicator.
- Blue Indicator: Zigbee status indicator.
- Switch/Reset Key: Used for pairing and resetting the device.
- Power Jack: Type-C port for power input.
4. Specifications
| Feature | Description |
|---|---|
| Product Name | Tuya Multi-mode Smart Gateway |
| Brand Name | XFOX |
| Supply Voltage | DC 5V |
| Output Current | 1A |
| Operating Temperature | -10℃ ~ 55℃ |
| Operating Humidity | 5%~90% RH (no condensation) |
| Wireless Communication Protocol | 2.4G WiFi, Tuya Zigbee 3.0, Mesh Networking, Bluetooth |
| Communication Method | Bluetooth-Compatible, Zigbee, Wi-fi |
| Product Size | 60*60*14mm |
| Net Weight | 33g |
| State of Assembly | Ready-to-Go |
| Certifications | CE, FCC, RoHS |
5. Package Contents
Upon opening your package, please ensure all the following items are present:
- 1 x Tuya Multi-mode Smart Gateway
- 1 x Type-C Power Cable
- 1 x User Manual
6. Setup & Installation
6.1 Initial Setup
- Power On: Plug the provided Type-C power cable into the gateway's power jack and connect it to a 5V 1A power adapter (not always included, but required).
- App Download: Search for "Smart Life" in your device's App Store (iOS) or Google Play Store (Android), or scan the QR code provided in the manual to download and install the smart app.
- Connect to Wi-Fi: Ensure your phone's Wi-Fi is enabled and connected to a 2.4GHz Wi-Fi network. The gateway only supports 2.4GHz Wi-Fi.
- Add Gateway: Open the Smart Life app. Click on the "+" icon in the upper right corner to add a device. The app should automatically discover the gateway. If not, select "Gateway" from the device list.
- Pairing Mode: Long press the switch/reset key on the gateway until the indicator light starts blinking, indicating it's in distribution (pairing) mode.
- App Instructions: Follow the on-screen instructions in the Smart Life app to complete the gateway setup. You will be prompted to enter your Wi-Fi password.
6.2 Adding Zigbee/Bluetooth Devices
- Once the gateway is successfully linked to the app, navigate to the gateway's control interface.
- Select the option to add Bluetooth or Zigbee devices.
- Ensure your Zigbee/Bluetooth device is in pairing mode (refer to the device's specific manual for instructions on how to enter pairing mode).
- The app will search for nearby devices. Once discovered, follow the app's instructions to link the device to the gateway.

7. Operating Instructions
7.1 Remote Control via Smart Life App
Once your devices are connected to the gateway, you can control them remotely through the Smart Life app from anywhere with an internet connection. The app allows for individual device control, group control, and scene automation.

7.2 Voice Control
The gateway is compatible with voice assistants like Google Assistant and Amazon Alexa. To enable voice control:
- Link your Smart Life account with your preferred voice assistant app (e.g., Google Home, Amazon Alexa).
- Discover devices through the voice assistant app.
- You can now use voice commands to control your connected smart devices (e.g., "Hey Google, turn on the living room light").

7.3 Automation and Scene Creation
Utilize the Smart Life app to create automated routines and scenes. For example:
- Set schedules for lights to turn on/off.
- Create a scene where all lights turn off when you leave home.
- Link a door sensor to automatically turn off the air conditioner when a window is opened.

8. User Tips
- Power Cable Quality: If experiencing power issues or unstable performance, ensure you are using a high-quality Type-C power cable. Some users reported issues with the included cable, suggesting a replacement if necessary.
- Device Compatibility: While the gateway supports multiple protocols, some users have noted that it works best with Tuya-compatible Zigbee devices. Compatibility with other brands may vary.
- Placement: For optimal signal strength and stability, place the gateway in an open, unobstructed area, away from large metal objects or other sources of interference.
- Connectivity: If devices stop responding, check the gateway's power supply and Wi-Fi connection. Re-pairing devices might be necessary in some cases.
9. Troubleshooting
9.1 Gateway Not Connecting to Wi-Fi
- Ensure your Wi-Fi network is 2.4GHz. The gateway does not support 5GHz Wi-Fi.
- Check if the Wi-Fi indicator (Red) is blinking as expected during pairing.
- Verify your Wi-Fi password is correct.
- Move the gateway closer to your Wi-Fi router.
- Restart your Wi-Fi router and the gateway.
9.2 Zigbee/Bluetooth Devices Not Pairing
- Ensure the gateway is successfully connected to the Smart Life app.
- Verify that the Zigbee/Bluetooth device is in pairing mode. Refer to the device's specific manual.
- Move the Zigbee/Bluetooth device closer to the gateway.
- Check if the Zigbee indicator (Blue) on the gateway is active.
- Some devices may require a reset before they can be paired again.
9.3 Devices Stop Responding
- Check the power supply to the gateway and the connected devices.
- Verify the gateway's Wi-Fi connection is stable.
- Check the status of the devices in the Smart Life app.
- If a specific device is unresponsive, try re-pairing it with the gateway.
- Ensure there are no physical obstructions or new sources of interference between the gateway and the devices.
9.4 General Interference (FCC Guidelines)
If you experience harmful interference to radio or television reception, try the following:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
10. Maintenance
- Keep the gateway in a dry environment, away from direct sunlight and extreme temperatures.
- Clean the device with a soft, dry cloth. Do not use liquid cleaners.
- Ensure proper ventilation around the device.
- Regularly check for firmware updates through the Smart Life app to ensure optimal performance and security.
11. Warranty & Support
For warranty information and technical support, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your purchase receipt as proof of purchase.