1. Safety Information and Warnings
- Do not operate the wipers without water on the windshield to avoid damaging the rubber blade.
- Avoid forcibly bending the wiper arm, as this can cause deformation.
- Do not touch the rubber blade with sharp objects.
- Do not force-start the wipers when ice is present on the windshield in winter.
- Avoid prolonged exposure to direct sunlight or high-temperature environments, which can degrade the rubber.
2. Setup and Installation
Installation Instructions
- Lift the rear wiper arm away from the vehicle's window.
- Align the new wiper blade's locking clip with the wiper arm's attachment point.
- Gently press the locking clip until it securely clicks into place.
- Carefully lower the wiper arm back onto the window.
- Activate the rear wiper switch to test for proper operation and ensure a secure fit.

3. Operating the Wiper Blade
Once installed, the wiper blade operates in conjunction with your vehicle's rear wiper system. Ensure the windshield is wet before activation to prevent damage and ensure effective cleaning.

Noise Level
This wiper blade is designed for quiet operation, producing noise levels typically at or below 35dB, ensuring a peaceful cabin environment.

4. Maintenance
- After each use, gently tap the rubber blade to dislodge any accumulated debris, such as leaves or dirt.
- Regularly inspect the rubber blade for cracks, tears, or hardening. Replace the blade if any signs of wear are visible to maintain optimal cleaning performance.
- Clean the rubber blade periodically with a soft cloth and mild soap and water to remove road film and grime.
- Avoid exposing the wiper blade to harsh chemicals or solvents, which can degrade the natural rubber material.

5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Wiper does not operate | No power supply to the wiper system or faulty wiper motor. | Check the vehicle's power supply to the wiper system and inspect the wiper motor. Consult a professional if necessary. |
| Incomplete cleaning or streaking | Aged, worn, or damaged rubber blade. | Replace the rubber blade with a new one. |
| Excessive noise during operation | Incorrect wiper arm angle or worn components. | Adjust the wiper arm angle. If noise persists, inspect and replace any worn components. |
6. Specifications
| Feature | Detail |
|---|---|
| Product Name | Rear Windshield Wiper Blade |
| Brand | J-Leslie |
| Model Fitment | For Audi Q3 Sportback F3N RS Q3 2019-2024 |
| Type | Rear Windshield Wiper |
| Material | Natural rubber + High-strength plastic |
| Color | Black |
| Length | 16 inches (410 mm) |
| Package Dimensions (approx.) | 40 cm (L) x 12 cm (W) x 2 cm (H) |
| Package Weight (approx.) | 0.049 kg |


7. User Tips
- For optimal performance, ensure your rear windshield is clean from heavy dirt or ice before operating the wiper.
- If you notice any chattering or streaking, first clean the blade and windshield. If the issue persists, consider replacing the blade.
- The natural rubber material provides quiet and durable performance; proper maintenance will extend its lifespan.
8. Warranty and Support
Defective products are eligible for return or exchange. Please refer to your purchase documentation for specific return policies and contact information for support.
For more detailed information, you may consult the original user manual PDF available at: User Manual (PDF).