AXNEN A10 Smartphone Handheld Gimbal User Manual

1. Introduction

The AXNEN A10 is a versatile smartphone handheld gimbal designed to provide stable video recording and photography. It functions as both a 2-axis gimbal and a selfie stick, featuring a built-in extension rod, a removable fill light, and a Bluetooth remote control. This manual will guide you through the setup, operation, and maintenance of your A10 gimbal.

2. Quick Start & Setup

2.1 Unfolding the Gimbal

1. Loosen the manual knob according to the direction arrow.
2. Unfold the gimbal completely.
3. Tighten the knob after the gimbal is unfolded.
4. Open the tripod legs at the bottom for stable placement.

Figure 1: Quick start guide showing the gimbal unfolding process and tripod extension.

2.2 Installing the Smartphone

We strongly recommend removing your smartphone case before installation to ensure a secure fit. Make sure the smartphone is correctly inserted and cannot fall out.

Figure 2: Proper smartphone installation into the gimbal holder.

2.3 Powering On/Off

Long press the Power Button to power the gimbal on or off.

Figure 3: Detailed view of the AXNEN A10 components, including the Power Switch.

3. Operating Instructions

3.1 Gimbal Modes and Stabilization

The A10 offers both Gimbal Mode and Selfie Stick Mode. The phone clip is removable, and its orientation can be changed to switch between horizontal and vertical shooting.

1. Default Mode (Roll Axis Direction): Provides horizontal anti-shaking for lateral movement.
2. Pitch Axis Direction: For vertical anti-shaking during upward/backward movement.

Switching between Horizontal and Vertical Shooting:

1. Press and hold the buttons on both sides of the motor simultaneously to remove the smartphone holder.
2. Align the buckle of the smartphone holder with the motor assembly position, pressing and holding the buttons on both sides of the motor simultaneously to re-install it in the desired orientation.

Figure 4: Switching between vertical and horizontal shooting by reorienting the phone clip.

Mode Switching Slider:

There is a slider on the top of the AXNEN A10. Slide it left for Gimbal Mode and right for Selfie Stick Mode.

• Gimbal Mode: One-click switch horizontal & vertical, FPV Mode, Inception Mode, all remote buttons work.
• Selfie Stick Mode: Manually switch phone direction, Normal Shot, only the remote's shot button works.

Figure 5: Comparison of Gimbal Mode and Selfie Stick Mode functionalities.

3.2 Extension Rod Usage

The A10 features a 5-section telescopic rod that extends up to 39.6cm (15.6 inches) for versatile shooting angles.

• When the phone holder is in the Roll direction, the extension rod can be extended up to 5 sections max.
• When the phone holder is in the Tilt direction, the extension rod cannot be extended more than 2 sections.

Figure 6: The 39.6cm (15.6-inch) telescopic extension rod.

3.3 LED Light Instructions

The A10 includes a removable fill light with adjustable brightness and three color modes.

Powering On/Off & Mode Switching:

1. Press and hold the fill light button for 3 seconds to power on/off.
2. Single press to switch between light modes and brightness levels.

LED Light Modes:

• White Light: Soft, Mid, Strong
• Warm Light: Soft, Mid, Strong
• Mixed Light: Soft, Mid, Strong

Double press the button to activate SOS mode (can be activated in any light mode). Single click to exit SOS mode.

Figure 7: Quick one-click adjustment for light mode and brightness.

Installing/Removing the LED Light:

1. Push the red button on the top side to detach the LED light.
2. Align the LED light clip with the phone clip slot to install it. The LED light can be installed in both front-facing and rear-facing directions.

Figure 8: Installation and orientation options for the removable fill light.

3.4 Remote Control Instructions

The multi-function remote control is detachable and can be rotated 180° to the back of the handle.

Bluetooth Connection:

1. The remote control is in sleep mode by default. Press any button to activate it; the indicator will flash once.
2. Go to your smartphone's Bluetooth settings and find the Bluetooth name: A10_xxxx to connect.

Bluetooth Indicator:

• Off: Bluetooth is not connected.
• On: Bluetooth is connected.
• Flash: Remote control is in sleep mode.

Figure 9: Remote control details and Bluetooth indicator.

Remote Control Button Functions:

• Button 1 (Left Key):
  • Single press: Switch between landscape and portrait mode.
  • Double press: Start clockwise inception shooting. Press Button 3 twice to exit.
  • Press and hold: Start clockwise movement. Release to stop. Continue pressing and holding to recover. Press Button 3 twice to exit.
• Button 2 (Right Key):
  • Single press: Switch between FPV mode and lock mode.
  • Double press: Start anticlockwise inception shooting. Press Button 3 twice to exit.
  • Press and hold: Start anticlockwise movement. Release to stop. Continue pressing and holding to recover. Press Button 3 twice to exit.
• Button 3 (Shutter Button):
  • After Bluetooth is connected, single press to take a photo or start/stop video recording.

Figure 10: Visual examples of remote control functions for various shooting modes.

4. Maintenance

4.1 General Care and Storage

• Keep this product away from children and pets.
• Do not place the product near heat sources (furnaces, heaters, etc.) or in a hot car.
• Store the product in a dry environment.
• Avoid using the product in environments with excessively high or low temperatures.

4.2 Battery Care

• Do not overcharge or over-discharge the battery, as this may damage the battery cell.

5. Troubleshooting

If you encounter any issues with your AXNEN A10 gimbal, please consider the following general troubleshooting steps:

• Gimbal not stabilizing: Ensure the smartphone is correctly installed and balanced. Check that the motor rotation is not blocked by any external force.
• Remote control not connecting: Verify that Bluetooth is enabled on your smartphone and the remote control is activated (press any button). Ensure you are selecting the correct device name (A10_xxxx).
• LED light not working: Check if the fill light is properly installed and charged. Long press the power button for 3 seconds to ensure it's powered on.
• Unresponsive buttons: Ensure the remote control is not in sleep mode and is properly connected via Bluetooth.

For more detailed troubleshooting or persistent issues, please refer to the official support channels.

6. Specifications

7. User Tips

• Always ensure your smartphone is securely mounted before powering on the gimbal to prevent damage.
• Experiment with both Gimbal Mode and Selfie Stick Mode to find the best setting for your specific shooting needs.
• Utilize the removable fill light in various orientations to achieve optimal lighting for your photos and videos, especially in low-light conditions.
• Practice using the remote control's inception and FPV modes to create dynamic and engaging content.
• For long shooting sessions, remember the gimbal offers up to 15 hours of battery life, but the fill light has a separate battery capacity.

8. Safety Information

8.1 Caution

• Ensure the motor rotation is not blocked by external force during and after the stabilizer is powered on.
• Do not allow the device to come into contact with seawater or corrosive liquids.
• Do not disassemble the stabilizer (except for the detachable accessories as described in this manual).
• If the motor operates continuously for a long time, the surface temperature of the motor may become high.
• It is strictly forbidden to drop or collide with the stabilizer, as this may cause damage and abnormal operation.

8.2 Storage and Maintenance

• Keep this product away from children and pets.
• It is forbidden to place the product near heat sources (furnace or heater, etc.) and avoid leaving it in a hot car.
• Store the product in a dry environment.
• Do not overcharge or discharge the battery, as this may damage the battery cell.
• Do not use the product in environments with excessively high or low temperatures.

9. Additional Resources

A detailed user manual in PDF format is available for download. This document provides further in-depth instructions and diagrams for your AXNEN A10 gimbal. You can access it via the following link: AXNEN A10 User Manual (PDF)