OPUYYM 66202180495

Contents

OPUYYM PDC Parking Reversing Sensor Instruction Manual

Model: 66202180495 | Brand: OPUYYM

Introduction

This manual provides essential information for the proper installation, operation, and maintenance of your OPUYYM PDC Parking Reversing Sensor (Model: 66202180495). This sensor is designed to integrate with your vehicle's existing Parking Distance Control (PDC) system, assisting in detecting obstacles during parking maneuvers.

Four OPUYYM PDC Parking Reversing Sensors arranged in a cross pattern

Figure 1: OPUYYM PDC Parking Reversing Sensors (Set of 4)

Rear view of a single OPUYYM PDC Parking Reversing Sensor showing the electrical connector

Figure 2: Rear view of the sensor with electrical connector

Setup and Installation

Professional Installation Only. These Parking Distance Control (PDC) sensor assemblies are replacement or maintenance parts for motor vehicles that have a factory-installed PDC sensor only. Failure to follow installation instructions may result in the failure of the motor vehicle PDC sensor to operate properly.

⚠ WARNING

Read all instructions and warnings, and review all illustrations before installing. Failure to follow installation instructions or the use of improper PDC sensors may result in the motor vehicle PDC system failure causing property damage, personal injury, or death.

⚠ CAUTION

  • Each PDC Sensor is designed and manufactured to operate in specific motor vehicle makes, models, and years using the proper frequencies to communicate with the motor vehicle PDC System. Only install PDC Sensor designated for your specific motor vehicle make, model, and year.
  • Improper PDC installation or the use of unauthorized PDC Sensors will cause the motor vehicle PDC System to fail to operate properly.
  • Do not install PDC Sensor in a damaged bumper.
  • Upon completion of installation, test the motor vehicle PDC System using procedures described in the original manufacturer's service guide to confirm proper installation.
  • If the PDC system fails to operate properly, check all installation procedures to ensure proper installation and retest.
  • If the PDC System continues to fail to operate, immediately consult with technical support or an authorized motor vehicle dealership.

ℹ Repair Notes

  • Repair work on electrical systems in the vehicle may only be carried out by trained specialist personnel.
  • Repair work that is carried out incorrectly can lead to system failure and to severe personal injuries.
  • Please observe both the safety and also the installation instructions provided by each individual system or vehicle manufacturer for all repairs to electrical systems.

Operating Instructions

Once correctly installed and integrated into your vehicle's PDC system, the sensor operates automatically. The PDC system will provide audible or visual alerts (depending on your vehicle's features) when obstacles are detected within the sensor's range during parking maneuvers.

Maintenance

  • Keep the sensor surface clean from dirt, mud, ice, or snow to ensure optimal performance. Use a soft cloth and mild cleaning solution if necessary.
  • Regularly inspect the sensor for any visible damage or loose connections.
  • Avoid using abrasive cleaners or high-pressure washers directly on the sensor, as this may cause damage.

Troubleshooting

If your PDC system is not functioning correctly after sensor installation, consider the following:

  • System Failure: If the PDC system fails to operate properly, re-check all installation procedures to ensure the sensor is correctly seated and connected.
  • Incorrect Sensor: Ensure the installed sensor is the correct part number (66202180495) and is compatible with your specific vehicle make, model, and year.
  • Damaged Bumper: Do not install the sensor in a damaged bumper, as this can affect its performance.
  • Persistent Issues: If the PDC system continues to fail after re-checking installation, it is recommended to consult with a qualified automotive technician or an authorized motor vehicle dealership.

Specifications

Model Name66202180495 Parking Sensor
OEM NO.66202180495
Brand NameOPUYYM
TypeInvisible
OriginMainland China
Package Length20 cm
Package Width15 cm
Package Height5 cm
Package Weight0.06 kg

Vehicle Fitment:

  • For BMW 5 Series Sedan (F10) 2009/12-
  • For BMW 5 GRAN TURISMO (F07) 2009/10-
  • For BMW 5 Touring (F11) 2010/04-
  • For BMW 6 Convertible (F12) 2011/03-
  • For BMW 6 Coupe (F13) 2010/11-
  • For BMW 6 Gran Coupe (F06) 2011/09-
  • For BMW 7 (F01, F02, F03, F04) 2008/06-
  • For BMW X3 (F25) 2010/09-
  • For BMW X5 SUV (E70) 2007/02-2013/06
  • For BMW X6 SUV (E71) 2008/05-

Note: Vehicle fitment is for reference only. Always verify compatibility with your vehicle's existing part number before installation.

User Tips

No specific user tips are available at this time. Always ensure professional installation for optimal performance and safety.

Support

For any questions regarding the installation, operation, or performance of your OPUYYM PDC Parking Reversing Sensor, please contact the seller or your authorized automotive service center for assistance.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.