Godox SKYTALK AIR

Contents

Godox SKYTALK AIR 2.4G Full Duplex Wireless Intercom System

User Manual

Model: SKYTALK AIR

1. Introduction

Thank you for purchasing the Godox SKYTALK AIR Full Duplex Wireless Intercom System. This system is designed for professional communication in various scenarios such as film crews, live streaming, weddings, and aerial shoots. It offers clear, real-time communication with a robust transmission range and long battery life. Please read this manual carefully before use to ensure correct operation and optimal performance.

2. Safety Information and Warnings

  • The microphone is a precise instrument; avoid dropping or subjecting it to impact to prevent damage.
  • Keep this product out of reach of children.
  • Do not disassemble, modify, or attempt to repair this product. Any necessary repairs must be performed by Godox or an authorized service center.
  • Keep the product dry. Do not use it with wet hands, immerse it in water, or expose it to rain or damp conditions.
  • Avoid storing the product in direct sunlight, near heating devices, or in hot, humid, or dusty environments. Do not store where temperatures exceed 60°C.
  • Do not use the product in flammable or explosive environments. Pay attention to all relevant warning signs.
  • Small batteries can be swallowed by children; keep them out of reach. Do not swallow batteries, as this can cause burns. If a battery is swallowed, seek immediate medical attention.

3. Package Contents

The package contents vary depending on the specific configuration purchased (e.g., single headset, 3S, 4S, or 5S system). Please refer to the list below and the provided images to verify your package.

STA-CH08 Charging Case

Godox STA-CH08 Charging Case and Charging Cord

Image: Godox STA-CH08 Charging Case and Charging Cord

  • Charging Case x1
  • Charging Cord x1
  • Instruction Manual x1

SkyTalk Air Headset (Single)

Godox SkyTalk Air Headset and Accessories

Image: Godox SkyTalk Air Headset and Accessories

  • Headset x1
  • Battery x1
  • Charging Cord x1
  • Microphone Cushion x1
  • On-Ear Foam Cushion x1
  • Battery Cushion x1
  • Over-Ear Foam Cushion x1
  • Instruction Manual x1
  • Number Sticker x1

For multi-headset systems (3S, 4S, 5S), the quantities of headsets, batteries, cushions, and charging cases will vary accordingly. Refer to the full instruction manual PDF for detailed lists of each configuration.

4. Product Overview and Parts Identification

Headset Components

Diagram of Godox SkyTalk Air Headset with labeled parts

Image: Godox SkyTalk Air Headset with labeled parts

  • External Antenna: For wireless signal transmission.
  • USB-C Port: For charging the headset.
  • Power Switch: To turn the headset on or off.
  • 3.5mm Earphone Jack: For external earphone monitoring.
  • Battery Compartment Switch: To open the battery compartment.
  • Volume Adjustment Dial: Rotate up to increase volume, rotate down to decrease volume.
  • Pairing Button: Press and hold for 5 seconds to initiate pairing.
  • Mute/PTT Mode Button: Toggles between mute and Push-To-Talk modes.
  • Microphone Rod: Lift up to mute (mic off), lower down to talk (mic on).
  • Indicator Switch: LED indicator for status and charging.
  • Label Paste Site: Red label for master headset, yellow label for remote headset.

Battery Charging Case Components

Diagram of Godox Battery Charging Case with labeled parts

Image: Godox Battery Charging Case with labeled parts

  • Battery Charging Slot: Slots for charging up to 8 batteries simultaneously.
  • Battery Level Testing Button: Press to check battery levels when the case is off.
  • Indicator: LED indicators for each charging slot.
  • Cover Switch: Press to open the charging case cover.
  • USB-C Port: For charging the charging case itself.

5. Setup

5.1 Battery Installation and Disassembly

  1. Slide down the battery compartment switch and open the cover.
  2. Insert the battery into the compartment with the contacts facing inwards.
  3. Close the cover.

To disassemble, reverse the steps: slide down the switch, open the cover, and take out the battery.

5.2 Pairing Headsets

The headsets are pre-paired from the factory. Pairing is only required when a new headset needs to be connected to an existing system.

  1. Set Master/Remote: Designate one headset as the master headset and the others (1-4) as remote headsets.
  2. Initiate Pairing: Press and hold the pairing buttons of all headsets (master and remotes) for 5 seconds. A voice announcement "to be connected" indicates they are connected.
  3. Verify Role: Press the pairing button of a headset again to hear a voice announcement indicating if it's a "master headset" or "remote headset".
  4. Reboot: Reboot all headsets. They are now ready for use.

Note: One master headset can connect to a maximum of four remote headsets.

6. Operating Instructions

6.1 Power On/Off

Use the Power Switch on the headset to turn it on or off.

6.2 Microphone Usage

Diagram showing microphone operation modes

Image: Microphone operation modes (Mute, PTT, Master Replacement)

  • Turn On/Off Microphone: The microphone rod can be worn on either the left or right side and adjusted up to 270 degrees.
  • Mic On (Talk): Lower the microphone rod down. It will monitor and pick up sound, with a voice announcement "Microphone on".
  • Mic Off (Mute): Lift the microphone rod up (within a 90-degree range). It will only monitor, without picking up sound, with a voice announcement "Microphone off".
  • Mute/PTT Mode (when Mic is On):
    • PTT Mode: Press and hold the Mute/PTT Mode Button. Release to mute.
    • Resume Duplex: Press the Mute/PTT Mode Button once to resume full duplex intercom.

6.3 Volume Adjustment

Rotate the Volume Adjustment Dial up to increase volume, and rotate down to decrease volume.

6.4 Searching Headsets

To quickly identify headsets within the same group, press the pairing button twice rapidly. All headset indicators will flash red and green quickly and alternately for 15 seconds.

6.5 External Earphone Monitoring

An external earphone can be connected to the 3.5mm Earphone Jack on the headset to monitor the intercom audio.

6.6 Flexible Grouping

Diagram showing flexible grouping of headsets

Image: Flexible grouping of headsets (3-user group and 2-user group from 5 headsets)

The system supports up to 5 users in one call. Each headset can assume master or remote roles. You can also create two separate groups simultaneously for versatile team scenarios (e.g., a 3-user group and a 2-user group from a total of 5 headsets).

6.7 Master Headset Replacement

If the original master headset is lost, damaged, or runs out of battery, any other remote headset can be promoted to master. This ensures communication never breaks.

7. Charging

7.1 Charging Headsets

Connect a USB-C charging cable to the USB-C Port on the headset. The indicator will show charging status:

  • Blue slow flash (power off): Charging
  • Blue constant for 5 minutes then light off (power off): Fully charged
  • Power on + charging cord: Indicator flashes blue slowly for 5 seconds, then enters working status.

7.2 Charging Case

Connect a USB-C charging cable to the USB-C Port on the charging case to charge the case itself. The case can charge up to 8 batteries simultaneously.

7.3 Battery Charging Case Indicators

The charging case has 8 indicators, one for each charging slot. When the case is powered on and a battery is inserted, the corresponding indicator will light up. It will turn off if the battery is removed.

  • During Charging (Case powered on, battery inserted):
    • Green flash: Charging
    • Green constant: Fully charged
    • Red rapid flash for 10s: Low temperature protection (charging paused)
  • Checking Battery Level (Case powered off, battery inserted, press Battery Level Testing Button):
    • Red constant: 0%-40% battery
    • Yellow constant: 40%-80% battery
    • Green constant: 80%-100% battery

8. Maintenance

  • Keep the product dry. Do not use or store it in dusty, humid, or high-temperature environments.
  • Clean the product with a soft, dry cloth. Do not use harsh chemicals or solvents.
  • Ensure batteries are properly installed and removed. Store batteries separately if the device will not be used for an extended period.
  • Avoid dropping or subjecting the device to strong impacts.

9. Troubleshooting

  • No Power: Ensure the battery is correctly installed and charged. Check the power switch.
  • No Audio/Poor Audio Quality: Check volume levels. Ensure the microphone rod is lowered (mic on). Verify headsets are properly paired. Check for obstructions if range is an issue.
  • Cannot Pair: Ensure all headsets are powered on. Follow the pairing instructions carefully (Section 5.2). Ensure no more than 4 remote headsets are connected to one master.
  • Limited Range: Ensure external antennas are unobstructed. Avoid using in environments with significant signal interference (e.g., thick walls, many wireless devices).

10. Specifications

ParameterHeadset (SkyTalk Air)Battery Charging Case (STA-CH08)
Wireless Band2.4GHz-
Max. Transmission Distance500m-
Frequency Response150Hz-7KHz-
Signal to Noise Ratio≥71dB @94dBSPL, 1KHz-
Max. SPL> 115dBSPL-
Lithium Battery ParametersDC3.8V, 760mAh, 2.888Wh-
USB-C Input5V⎓0.6A5V⎓2A, 9V⎓2A
USB-C Output-4.35V⎓0.2A
Charging Time (USB-C)Approx. 2h-
Battery LifeApprox. 20h-
Adjustable Head CircumferenceApprox. 54-58cm-
Working Environment Temp.0°C~40°C0°C~40°C
Net Weight (With Battery)Approx. 207gApprox. 156g

Specifications and data may be subject to changes without notice.

11. User Tips

  • For optimal range, ensure a clear line of sight between headsets and avoid physical obstructions.
  • Fully charge all batteries before each use to ensure maximum operating time.
  • Utilize the flexible grouping feature to assign specific communication channels for different team roles on set.

12. Warranty and Support

This product is covered by a limited warranty. Please retain your purchase receipt and warranty card for service. The warranty period for different components is as follows:

  • Product Main Body: 12 months
  • Battery: 3 months
  • Charger, Electrical Parts etc.: 12 months
  • Other Items (e.g., cables, foam, bags): No warranty

For warranty service, please contact your product distributor or an authorized Godox service institution. You may also contact Godox after-sale service directly. For full details on warranty terms and conditions, including cases where warranty may be invalid, please refer to the complete instruction manual PDF: Godox SkyTalk Air User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.