1. Introduction
Thank you for choosing the coolo Tuya ZigBee Smart Switch Module. This module allows you to convert traditional switches into smart switches, enabling remote control, voice control, and scheduling through the Tuya Smart/Smart Life app. Please read this manual carefully before installation and use to ensure proper operation and safety.

Figure 1: Tuya ZigBee Smart Switch Module variants (1-channel 16A, 2-channel 16A, 1-channel 10A)
2. Safety Precautions
- High Voltage Warning: This device operates with AC 85-250V. Always turn off the main power supply at the circuit breaker before performing any wiring or installation.
- Installation should be performed by a qualified electrician or a person with sufficient knowledge of electrical systems.
- Ensure all wiring connections are secure and properly insulated to prevent short circuits.
- Do not exceed the maximum load power specified for the module.
- This module requires a neutral wire for operation.
- Only use with mechanical rocker switches. Not suitable for electronic rocker switches.
- Only supports 2.4GHz Wi-Fi networks for the Zigbee gateway connection.
3. Setup and Installation
3.1 What's in the Box
- 1 x Tuya ZigBee Smart Switch Module
- 1 x User Manual (this document)
3.2 Wiring Instructions
Important: Turn off the main power supply before wiring.
- Wire the device according to the markings on the module cover.
- The module must be powered by both Live (L) and Neutral (N) wires.
- Connect the input Live wire to 'L-in' and Neutral wire to 'N-in'.
- Connect the appliance's Live wire to 'L-out' and Neutral wire to 'N-out'.
- For physical wall switches, connect the two ends of the wall switch to 'S1' and 'S2' terminals. Warning: S1 and S2 cannot be connected to strong power lines (e.g., Live or Neutral lines).

Figure 2: Internal Electrical Diagram and Wiring Terminals

Figure 3: Example Wiring for Two-Way Control with a Physical Switch
3.3 Physical Installation
The mini size of the module allows it to be easily placed behind a traditional wall switch or inside a standard electrical junction box.

Figure 4: Module Installation Behind a Wall Switch
3.4 Network Configuration (Pairing)
This ZigBee module requires a ZigBee gateway (hub) to connect to your smart home system and the app.
- Ensure your ZigBee gateway is powered on and connected to your 2.4GHz Wi-Fi network.
- Power on the Smart Switch Module.
- Long press the physical 'Button' on the module for 3 seconds. The indicator LED will flash rapidly, indicating the device has entered network configuration mode.
- Open the Tuya Smart or Smart Life app on your smartphone.
- Go to the 'Add Device' interface (usually by tapping '+' or 'Add Device').
- Select your ZigBee Gateway and then choose 'Search Device' or 'Add Sub-device'.
- Follow the app's instructions to complete the pairing process.

Figure 5: ZigBee Network Setup Overview
4. Operating Instructions
4.1 App Remote Control
Once paired, you can control your lights or appliances connected to the module from anywhere using the Tuya Smart/Smart Life app on your smartphone.

Figure 6: App Remote Control Interface
4.2 Voice Control
Integrate the Tuya Smart/Smart Life app with popular voice assistants like Amazon Alexa, Google Home, or Yandex Alice to control your switch with voice commands.

Figure 7: Voice Control with Compatible Smart Speakers
4.3 Timing, Scheduling, and Countdown
Automate your daily routines by setting schedules, countdown timers, or creating circulation and random on/off patterns within the app.

Figure 8: App Interface for Timing and Scheduling Functions
4.4 Group Control
Combine multiple smart switches into a single group within the app to control them simultaneously with one tap.
4.5 Sharing Function
Share control of the smart switch module with family members through the Tuya Smart/Smart Life app, allowing everyone in the household to manage the connected devices.
4.6 Two-Way Control
The module supports two-way control when wired with traditional two-way switches, allowing you to control the light from multiple locations.
5. Maintenance
- Keep the device in a dry environment.
- Clean the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Ensure the device is not exposed to extreme temperatures or direct sunlight.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not responding / Offline in app | No power; ZigBee gateway offline; Weak ZigBee signal. | Check power supply to the module; Ensure ZigBee gateway is online and connected to 2.4GHz Wi-Fi; Move gateway closer to the module or use another ZigBee device as a repeater. |
| Unable to pair the device | Not in pairing mode; Gateway not in pairing mode; Incorrect app steps. | Long press the module button for 3 seconds until LED flashes rapidly; Ensure gateway is in pairing mode; Follow app instructions carefully. |
| Voice control not working | Incorrect integration; Device name not recognized; Voice assistant issue. | Ensure Tuya/Smart Life is correctly linked to your voice assistant; Try renaming the device in the app; Check your voice assistant's settings. |
| Physical switch not working correctly | Incompatible switch type; Incorrect wiring of S1/S2. | Ensure you are using a mechanical rocker switch (not electronic); Verify S1/S2 wiring as per diagram (Figure 2). |
| Module gets warm during operation | Normal operation; Overload. | Slight warmth is normal. If it's excessively hot, check if the connected load exceeds the module's maximum rating. |
7. Specifications
| Feature | Detail |
|---|---|
| Wireless Protocol | Zigbee 3.0 |
| Input Voltage | AC 85-250V, 50/60Hz |
| Output Voltage | AC 85-250V, 50/60Hz |
| Rated Current | 10A / 16A Max (model dependent) |
| Load Power | <3500W (AC 220V/16A) |
| Operating Temperature | -10℃ to 55℃ |
| Operating Humidity | 0-99%RH |
| Product Size | 41mm × 20mm × 41mm |
| Shell Material | ABS (Flammability Rating: V0) |
| App Compatibility | Tuya Smart / Smart Life (requires Zigbee gateway) |
| Voice Assistant Compatibility | Amazon Alexa, Google Home, Yandex Alice |
8. User Tips
- For advanced users, this module is compatible with zigbee2mqtt and exposes various controls including individual endpoint control (L1, L2 for multi-channel), power outage memory settings (on/off/restore), and switch type configuration (toggle/state/momentary).
- When using physical paddle switches with