VaneAims FXB-VAPS

Contents

VaneAims FXB-VAPS Voltage & Current Protector User Manual

Model: FXB-VAPS | Brand: VaneAims

1. Introduction

Thank you for choosing the VaneAims FXB-VAPS Voltage & Current Protector. This smart plug-in device provides comprehensive protection for your electrical appliances against overvoltage, undervoltage, overcurrent, and other power anomalies. It features real-time monitoring and adjustable parameters for maximum safety and convenience.

This device is designed for household use, rental apartments, offices, and for use while living abroad, ensuring a safety barrier for your household appliances.

VaneAims Voltage Current Protector 16A with European standard plug and real-time digital display

Image: The VaneAims FXB-VAPS Voltage & Current Protector, highlighting its 16A European standard plug and digital display.

2. Safety Information

General Safety Notes:

  • Do not exceed the rated 16A current or 230V voltage specifications.
  • Do not disassemble or modify the device; this will void the warranty and may cause safety hazards.
  • If the device repeatedly trips power, check your appliance or electrical circuit for faults before reusing.
  • WARNING: Use only in dry indoor environments; keep away from water and moisture.

Product Certifications:

The FXB-VAPS Voltage & Current Protector is CE & RoHS certified, ensuring compliance with European safety and environmental standards.

Back view of the VaneAims protector showing CE and RoHS certification logos

Image: Rear view of the protector, displaying the EU plug and CE/RoHS certifications.

3. Product Overview

The FXB-VAPS is a compact and durable device designed for easy use. It features a digital LED display for real-time monitoring and control buttons for parameter configuration.

Key Features:

  • Digital LED Display: Shows real-time voltage (red) and current (green).
  • Control Buttons: Settings/Adjustment keys for parameter configuration.
  • EU Standard Socket Outlet: For connecting your electrical load.
  • Compact, Durable Housing: Made from high-toughness, flame-retardant material, anti-scratch and high-temperature resistant.
  • Multi-layer Protection: Overvoltage, undervoltage, and overcurrent protection.
  • Intelligent Delay and Reclosing Function: Automatically restores power after conditions stabilize.
Close-up of the VaneAims Voltage & Current Protector's digital display and control buttons

Image: Front view of the protector, showing the digital display and control interface.

Diagram illustrating the core functions of the VaneAims protector: overcurrent, overvoltage, undervoltage protection, real-time digital display, adjustable threshold, and flame-retardant housing.

Image: Visual representation of the protector's core functions.

4. Specifications

The following table details the technical parameters of the FXB-VAPS Voltage & Current Protector:

Parameter Specification
BrandVaneAims
Model NumberFXB-VAPS
Plug TypeEU Standard Plug
Rated Operating VoltageAC 230V
Rated Operating Current16A
Effective Voltage RangeAC 80-300V (1% accuracy, calibratable)
Effective Current RangeAC 1.0~16.0A (1% accuracy, calibratable)
Frequency Range40~70Hz (1% accuracy, calibratable)
Overvoltage Protection Value Range130-300V, Default 270V
Overvoltage Recovery Voltage Range125-295V, Default 265V
Overvoltage Protection Action Time0.1-10.0S, Default 0.5S
Overvoltage Recovery Delay Time1-999S, Default 30S
Undervoltage Protection Value Range80-210V, Default 170V
Undervoltage Recovery Voltage Range85-215V, Default 175V
Overcurrent Adjustment Range1-16A, Default 16A
Overcurrent Action Time0.1-10.0S, Default 1.0S
Power-On Delay Time1-999S, Default 5S
Power ConsumptionLow power consumption, optional energy-saving mode
InstallationPlug-and-play, no wiring required
CertificationsCE, RoHS
Detailed product parameters table for the VaneAims Voltage & Current Protector

Image: Technical specifications table for the protector.

Product Dimensions:

Diagram showing the dimensions of the VaneAims Voltage & Current Protector

Image: Product size diagram with measurements.

5. Installation & Setup

5.1. Plug-and-Play Installation

  1. Insert the FXB-VAPS protector directly into a standard EU wall socket. The digital display will light up and show real-time voltage readings.
  2. Plug your electrical device into the outlet on the protector. The current reading will display once the device is powered on.
VaneAims protector plugged into a wall socket with a rice cooker connected, demonstrating plug-and-play installation

Image: Plug-and-play installation example.

5.2. Parameter Configuration (via Setup Menu)

To configure the protection parameters:

  1. Press the setting key (gear icon) to enter the menu.
  2. Use the up/down keys to navigate through the parameters.
  3. Press the setting key again to select a parameter, then use the up/down keys to adjust its value.
  4. Press the setting key to confirm the new value and exit the parameter editing mode.
  5. The device will automatically save your settings.

The setup menu includes the following parameters:

Code Option Set Range Default
P1Power-on delay1-9995S
P2Recovery delay1-99930S
P3Overvoltage130-300270V
P4Overvoltage recovery value125-295265V
P5Undervoltage80-210170V
P6Undervoltage recovery value85-215175V
P7Overvoltage action delay0.1-10.00.5S
P9Overcurrent1-1616A
P10Overflow as delay0.1-10.01.0S
P11Continuous overcurrent counting0-200 times
P12Current correction-10%~+10%0A
P13Frequency correction-2.5%~+2.5%0Hz
P14Rapid power failure protectionON/OFFON
P15Display mode1: Standards
2: Manual switch
3: Automatic switch
1: Standards
P16Automatic resetON: Self-recovery
OFF: Manual recovery
ON
P17Action/knife modeON/OFFON
P18Energy saving modeON/OFFOFF
P19Setup lock password000-999112
P20Change password lock000-999112
Table showing the setup menu options, set ranges, and default values for the VaneAims protector

Image: Setup menu parameters and default values.

6. Operating Instructions

Protection Functions:

  • Overvoltage Protection: Automatically cuts off power when voltage exceeds the set threshold. Power is restored after voltage stabilizes to the recovery value and the set delay.
  • Undervoltage Protection: Shuts down power if voltage drops below the set threshold, preventing appliance damage from low voltage.
  • Overcurrent Protection: Detects excessive current draw and cuts power to prevent circuit overload and fire hazards.
  • Automatic Reset: The device will automatically restore power when conditions return to safe levels (default ON, can be set to manual reset).
  • Rapid Power Failure Protection: Instantly responds to sudden power anomalies (default ON).

Demonstration of Overvoltage Protection:

Video: This video demonstrates the overvoltage protection feature. When the input voltage exceeds the set protection value, the protector cuts off power. Once the voltage returns to normal, the device automatically restores power after a short delay.

VaneAims protector providing overcurrent protection to a washing machine

Image: Overcurrent protection in action, preventing damage to connected appliances like a washing machine.

7. Maintenance

  • Keep the device clean and free from dust. Use a soft, dry cloth for cleaning.
  • Ensure the device is not exposed to direct sunlight or extreme temperatures.
  • Regularly check the plug and socket for any signs of damage or loose connections.
  • Do not attempt to repair the device yourself. Contact qualified personnel if issues arise.

8. Troubleshooting

  • Device not powering on: Ensure it is securely plugged into a live wall socket. Check the wall socket with another appliance.
  • Power cuts off frequently: Check the connected appliance for faults or excessive power draw. Verify that the voltage and current settings (P3-P6, P9) are appropriate for your electrical environment and appliance.
  • Display is blank or flickering: Unplug the device, wait a few seconds, and plug it back in. If the issue persists, the device may be faulty.
  • Cannot adjust settings: Ensure the setup lock password (P19) is not active. If it is, enter the correct password to unlock settings.

9. User Tips

  • For sensitive electronics, consider setting slightly tighter overvoltage/undervoltage thresholds to provide an extra layer of protection.
  • Utilize the power-on delay (P1) for appliances that require a stable power supply before starting, such as refrigerators or air conditioners, to prevent damage from rapid power cycling.
  • If you experience frequent power fluctuations, consider enabling the energy-saving mode (P18) if available, to optimize power consumption during standby.
  • Regularly check the digital display to monitor your home's voltage and current, which can help identify potential electrical issues before they cause damage.

10. Warranty & Support

For warranty information or technical support, please refer to the official VaneAims website or contact your retailer. Keep your purchase receipt as proof of purchase.

A user manual in PDF format is available for download. Reference: User manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.