1. Introduction
Thank you for choosing the YOSOO Car Rear View Reverse Camera. This device is designed to enhance your driving safety by providing a clear view of the area behind your vehicle, especially when reversing. It features advanced imaging technology and robust construction for reliable performance in various conditions.
- Superior Image Quality: Offers super low-light performance, high resolution, high sensitivity, and an excellent signal-to-noise ratio for clear visuals.
- Durable Design: Shockproof with an IP67 waterproof rating, providing anti-interference capabilities and resistance to extreme temperatures.
- Wide Viewing Angle: Features a 170-degree wide viewing angle for comprehensive coverage behind your vehicle.
- Advanced Processing: Built-in DSP digital chip ensures high clarity images without distortion.
- Collision Prevention: Provides a full sight of the back of your car to help protect against collisions with invisible obstacles.

2. Safety Warnings
- WARNING: To avoid danger of suffocation, keep any plastic packaging bags away from babies and children.
- Ensure all electrical connections are secure and properly insulated to prevent short circuits or electrical hazards.
- Professional installation is recommended for optimal performance and safety.
- Always test the camera functionality before fully reassembling vehicle components.
3. Package Contents
Please check the package for the following items:
- 1 x Rear View Reverse Camera Unit
- 1 x Power Cable (for 12V DC connection)
- 1 x Video RCA Cable (for connecting to display monitor)

4. Specifications
| Feature | Specification |
|---|---|
| Voltage | 12V DC |
| Current Consumption | 130mA |
| Effective Pixels | NTSC: 628(H)x535(V) |
| Resolution | 480 TV lines |
| Minimum Illumination | 3Lux/F1.2 (0Lux when infrared LED on) |
| Lens Angle | 170 degrees |
| S/N Ratio | More than 48db |
| Electronic Shutter | 1/50/1/60-1/15,000 seconds |
| Video Output | RCA connector, 1.0vp-p, 75ohm |
| Operating Temperature | -30 to 60℃ RH95% Maximum |
| Storage Temperature | -35 to 70℃ RH95% Maximum |
| Waterproof Rating | IP67 |
| Other Features | Automatic white balance, AGC and BLC |
5. Setup and Installation
This camera is designed for embedded mounting, typically replacing a license plate light housing or similar rear vehicle component. Ensure your vehicle is compatible before installation.
5.1 Compatibility
This camera is compatible with the following vehicle models:
- CADDY: 2004-2015
- TOURAN: 2003-2015
- T5, T5.1 TRANSPORTER: 2003-2015
- SUPERB: 2002-2008
Note: Compatibility is for reference only. Please ensure the item physically fits your vehicle's specific model and year.
5.2 Installation Steps
- Prepare Vehicle: Ensure the vehicle's ignition is off and the parking brake is engaged. Disconnect the negative terminal of the car battery for safety.
- Mount Camera: Carefully remove the existing component (e.g., license plate light) where the camera will be installed. Mount the camera unit securely in its designated position.
- Adjust Lens: Once mounted, adjust the lens of the camera to its optimal viewing angle. This may require temporary power to the camera to check the view on a monitor.
- Connect Power: Connect the camera's power cable (red wire to 12V positive, black wire to ground). Typically, the positive wire is connected to the vehicle's reverse light power source so the camera activates when reverse gear is engaged.
- Connect Video: Connect the camera's video RCA cable to your vehicle's display monitor or head unit that supports video input.
- Test Functionality: Reconnect the car battery. Turn on the vehicle and engage reverse gear to test the camera's operation and image display. Adjust as necessary.
- Secure Wiring: Route and secure all cables to prevent pinching, abrasion, or interference with vehicle operations.


5.3 Product Variations
Please note that the camera may come in slightly different designs (New Type vs. Old Type) which are shipped randomly. Functionality remains the same.

6. Operating Instructions
The YOSOO Car Rear View Reverse Camera operates automatically:
- When your vehicle is shifted into reverse gear, the camera will automatically power on.
- The video feed from the camera will then be displayed on your connected monitor or head unit.
- Shift out of reverse gear, and the camera will power off, and the display will return to its previous state.
Always use your mirrors and perform head checks in conjunction with the camera for maximum safety.
7. Maintenance
- Lens Cleaning: Periodically clean the camera lens with a soft, damp cloth to ensure a clear view. Avoid abrasive cleaners that could scratch the lens.
- Connection Check: Occasionally inspect the power and video cable connections to ensure they are secure and free from corrosion or damage.
- Housing Inspection: Check the camera housing for any signs of damage, especially after extreme weather conditions or impacts.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No image on display | No power to camera; Loose video connection; Faulty display. | Check power connections (12V DC and ground); Ensure video RCA cable is securely connected; Test display with another video source if possible. |
| Flickering or distorted image | Unstable power supply; Poor ground connection; Video interference. | Verify stable 12V power; Ensure ground connection is solid; Check for nearby electrical interference (e.g., from other vehicle electronics). |
| Poor image quality (blurry, dark) | Dirty lens; Insufficient lighting; Incorrect lens adjustment. | Clean the camera lens; Ensure adequate ambient light (camera has low-light capability but extreme darkness will affect clarity); Re-adjust lens angle. |
| Camera not activating in reverse | Power wire not connected to reverse light circuit; Faulty reverse light switch. | Confirm power wire is correctly tapped into the reverse light circuit; Check if reverse lights are functioning. |
9. User Tips
No specific user tips were available from customer reviews or Q&A for this product.
10. Warranty and Support
For technical support, warranty claims, or further inquiries, please contact the manufacturer or their authorized representative:
Manufacturer Information:
Company Name: Guangzhou Botai Electronics Co., Ltd.
Full Address: B102, 9th Floor, No. 7, Huangzhuang South Road, Dayuan, Taihe Town, Baiyun District, Guangzhou, Guangdong, China
Email: 17169840595@163.com
Telephone: +86-17169840595
EU Authorized Representative:
AR Company Name: Kequ Technology s.r.o.
Full Address: Pražákova 1008/69, Štýřice, 63900 Brno, Jihomoravský kraj, Czech Republic
Email: christopher25106@outlook.com
Telephone: +420-123456789