1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your new MAGIC COLORM LED Lens Fog Lights with Angel Eye DRL, designed specifically for Audi A4 B6 Sedan models from 2001 to 2005. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Safety & Warnings
Important Safety Information
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Warning: Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not expose to water or moisture during installation or if not properly sealed.
3. Product Overview
The MAGIC COLORM LED Lens Fog Lights are designed to provide superior illumination and enhance the aesthetic appeal of your Audi A4 B6 Sedan. They feature a durable construction and advanced lighting technology.
Key Features:
- Superior Illumination: High-quality LED lens delivers focused, anti-glare light with strong penetration, improving night and bad weather driving safety.
- Durable Build: High-grade ABS housing + high-transmittance PC lens, IP67 waterproof, dustproof, shock-resistant, and anti-aging for long-term use.
- Plug-and-Play Installation: No drilling or modification required, connects directly to the original vehicle wiring harness for quick and easy setup.
- Enhanced Style: The angel eye DRL design upgrades the front look, giving your Audi a modern and aggressive appearance.
- Stable Performance: Built-in circuit protection prevents short circuits, overcurrent, and overheating, ensuring safe and reliable operation.



4. Specifications
| Attribute | Value |
|---|---|
| Brand Name | MAGIC COLORM |
| Item Type | Fog Lamp Assembly |
| Voltage | DC 12V |
| Lumens | 800LM |
| OEM NO. | 8E0941700, 8E0941699 |
| Material | ABS+LED |
| Waterproof Rate | IP67 |
| Light Color | White |
| Certification | CCC, ECE, Dot |
| Dimensions (approx.) | Height: 8.3cm (3.27 inches), Width: 12cm (4.72 inches) |

5. Installation & Setup
Step 1: Preparation Work (Safety First)
- Power Off: Park the car steadily and engage the handbrake. Disconnect the negative cable of the battery to prevent electrical hazards.
Step 2: Remove the Old Light
- Access: Open the tailgate (if applicable for rear lights, for front fog lights, access is typically from the front bumper area or wheel well liner). Find and remove the tail light repair cover from the inside (or relevant access panel for fog lights).
- Disconnection: Disconnect the electrical plug, unscrew any fixing nuts or bolts, and carefully pull out the old lamp from its mounting position.
Step 3: Install the New Light (Test First, Then Fix)
- Pre-testing: First, connect the new light's plug to the original car harness. Reconnect the battery temporarily. Turn on the power and test whether the brake lights, turn signals, reverse lights, and driving lights (including fog lights and DRLs) are all lit up normally.
- Formal Fixing: After confirming that the function is normal, disconnect the battery again. Align the new light with its position and install it. Tighten all fixing nuts or bolts from the inside. Finally, securely connect the electrical plug and replace any removed maintenance covers or panels.

6. Operating Instructions
Once installed, the LED Lens Fog Lights operate in conjunction with your vehicle's existing lighting system. The Angel Eye DRL (Daytime Running Light) feature will typically activate automatically when the vehicle is running, providing enhanced visibility during the day.
- Fog Light Activation: Refer to your Audi A4 B6 Sedan's owner's manual for specific instructions on how to activate the front fog lights. This is usually done via a switch or stalk control on the dashboard or steering column.
- DRL Function: The Angel Eye DRLs are designed to be on whenever the vehicle is in operation, improving daytime visibility.

Video demonstrating the product display and various lighting effects of the fog lights.
7. Maintenance
Final Inspection
- Function Review: After installation and reconnecting the battery, perform a final check of all lighting functions (fog lights, DRLs, turn signals, brake lights, reverse lights) to ensure they operate correctly.
- Sealing Inspection: After washing the car or exposing it to water, check the inside of the lamp for any severe water ingress or fogging. Slight fogging can occur and should dissipate and dry normally. Persistent water ingress indicates a sealing issue that needs to be addressed.
Regularly clean the lens with a soft cloth and mild cleaner to maintain optimal light output. Avoid abrasive materials that could scratch the lens.
8. Troubleshooting
Common Issues and Solutions:
- Lights Not Working:
- Check electrical connections to ensure they are secure.
- Verify the vehicle's fuses related to the fog lights are intact.
- Ensure the battery is properly connected and charged.
- Water Ingress/Persistent Fogging:
- While slight temporary fogging is normal, persistent water inside the lamp indicates a sealing issue. Re-check the installation for any gaps or improper seating.
- Ensure all seals and gaskets are correctly positioned and undamaged.
- Uneven Lighting/Flickering:
- Check for loose wiring connections.
- Ensure the light unit is securely mounted and not vibrating.
If issues persist after attempting these troubleshooting steps, please contact customer support.
9. User Tips
- Always perform a functional test of the lights before fully securing them to ensure all connections are correct.
- When disconnecting the battery, ensure you have any necessary radio codes or system reset procedures for your vehicle.
- Consider applying a thin bead of automotive-grade silicone sealant around the edges of the light housing during installation for an extra layer of moisture protection, especially if operating in harsh weather conditions.
10. Warranty & Support
For detailed warranty information and support, please refer to the official user manual PDF provided by the manufacturer. A digital version of the user manual is available for download.
Manufacturer: Guangzhou Camel Technology Co., Ltd.
EU Authorized Representative: MJCM SAR
If you encounter any issues such as product damage, mismatch, or missing parts, please contact the store customer service for a satisfactory solution.

For further assistance, you may refer to the comprehensive user manual available in PDF format: View User Manual (PDF)