1. Introduction
Preface
Thank you for choosing this Intelligent Car Information System. Our product adds CarPlay and Android Auto to vehicles lacking these features, letting you use them for music, navigation, and more—all via your car's original screen. A seamless upgrade, it bridges your smartphone and in-car display, bringing familiar interfaces without altering your vehicle's factory setup. Easy to integrate, it enhances connectivity safely, turning your existing infotainment system into a smart, intuitive hub. Modernize your drive affordably, leveraging what your car already has.
Safety Precautions
- Install only by qualified professionals to avoid damaging vehicle electrical systems.
- Disconnect car battery before installation to prevent short circuits.
- Ensure all connections are secure and insulated to avoid fire hazards.
- Do not block airbags, driver visibility, or vehicle controls during installation.
- Avoid modifying essential vehicle safety systems or wiring.
- Operate connected devices only when parked; never distract from driving.
- Regularly check for loose connections or overheating during use.
- Stop using immediately if unusual smells, sounds, or malfunctions occur.
- Ensure product usage complies with local traffic laws and regulations.
- Keep product away from water, extreme temperatures, and direct sunlight when not in use.
2. Product Features

The Ezonetronics Wireless CarPlay Android Auto Retrofit Kit Decoder Box integrated into a BMW CIC system.
Key Functions
- Apple CarPlay: Connects iPhone users to car systems, mirroring key apps. Access navigation, music, calls, and messages via the car's screen or voice commands. Enables hands-free operation, syncing contacts and playlists, enhancing driving safety and convenience seamlessly. Supports both wired and wireless connections.
- Android Auto: Connects Android phones to car displays, bringing essential apps safely. Access navigation, music, calls, and messages via voice or touch. Prioritizes driving-focused features, enabling hands-free use to keep focus on the road, enhancing convenience and safety. Supports both wired and wireless connections.
- Front/Rear/360 Input: The intelligent module supports video decoding and can be equipped with front view, rear view (with intelligent dynamic trajectory display and radar support), as well as a 360° panoramic view.
- Original Car Functions Retention: Maintains control via steering wheel buttons and the central control panel. Long press the "MENU" button on the car knob to switch between the factory OEM car system and the CarPlay/Android Auto system.
- Online Navigation: Use your favorite navigation apps like Google Maps, Waze, and Apple Maps with live traffic information.
- Intelligent Voice Control: Utilize "Hey Siri" for Apple CarPlay or Google Assistant for Android Auto for hands-free operation, including playing music and making calls.
- Built-in DSP: Features a fully adjustable Audio EQ for optimal audio quality.
- RCA Inputs: Includes 2 RCA inputs, allowing for the addition of rear and right PAL, NTSC AHD cameras.
- Dynamic Guidance Lines & Parking Distance Control: Supports HD 360 panoramic cameras with dynamic guidance lines and OEM parking style parking distance control.
- Lossless Installation: Designed for plug-and-play, non-destructive installation without cutting wires.
Product overview video demonstrating the CarPlay and Android Auto features.

Visual representation of the Wireless CarPlay Smart Module's capabilities including Bluetooth, CarPlay, Android Auto, Factory Protocol, Lossless Installation, Voice Control, Live Map, and Online Entertainment.

Illustration showing how to switch between the factory OEM car system and the CarPlay/Android Auto system by long pressing the "MENU" button.

The system retains original car functions, allowing control via steering wheel buttons (volume, call) and the central control panel (long press MENU to switch).

Online navigation using your favorite apps for seamless travel.

Intelligent voice control with "Hey Siri" for CarPlay and Google Assistant for Android Auto, enabling safer driving.

Android Auto interface showing music and navigation apps.
3. Compatibility
This retrofit kit is specifically designed for BMW vehicles equipped with the CIC system. Please verify your car's system and LVDS port type before installation.
Applicable Car Models and Screen Sizes (BMW CIC System)
| Car Model | Year | Screen Size |
|---|---|---|
| 1 Series (E87) | 2008-2012 | 6.5/8.8/10.25 inch |
| 3 Series (E90/E91/E92/E93) | 2009-2012 | 6.5/8.8/10.25 inch |
| 5 Series (E60/E61) | 2008-2009 | 6.5/8.8/10.25 inch |
| 6 Series (F12/F13) | 2010-2012 | 6.5/8.8/10.25 inch |
| 7 Series (F01/F02) | 2011-2012 | 8.8/10.25 inch |
| X1 (E84) | 2009-2014 | 6.5/8.8/10.25 inch |
| X3 (F25) | 2011-2013 | 6.5/8.8/10.25 inch |
| X5 (F70) | 2009-2013 | 6.5/8.8/10.25 inch |
| X6 (E71/E72) | 2009-2013 | 6.5/8.8/10.25 inch |
| Z4 (E89) | 2009-2013 | 8.8/10.25 inch |
| MINI (R55/R56/R60) | 2008-2012 | 6.5inch |

Step 1: Verify your original car radio homescreen menu picture to confirm it's a CIC System (not NBT, EVO ID5, or EVO ID6). Step 2: Check the LVDS port on the back of the OEM car screen; it must be a 4-PIN connector, not 6-PIN.

Table of suitable BMW and MINI models with their respective years and screen sizes.
4. Setup and Installation
Installation should only be performed by qualified professionals. Always disconnect the car battery before starting the installation process.
Package Contents
- 1 x CIC CarPlay box
- 1 x Power Harness
- 2 x LVDS Cable
- 1 x USB Cable
- 1 x User Manual (this document)
- 1 x External Microphone
- 1 x RCA & USB cable

Contents of the product package, including the main unit, power cable, LVDS cables, external microphone, and RCA/USB cable. Dimensions of the main unit are 146mm x 99mm x 27mm.
Wiring Diagram

Detailed wiring diagram showing connections for Factory LVDS Harness, Low CAN, High CAN, AUX, and Factory Buttons (10-pin and 4-pin options). Note: If there is any noise, unplug the wire connected to "Low CAN" and "High CAN" labeled "if there is any noise unplug this wire".
DIP Settings
The DIP switches configure the decoder for your specific car model and screen size. Since screen configuration cannot be obtained directly from the original system, all DIP options are provided. Try them one by one in order. After switching the DIP, be sure to restart the decoder for the changes to take effect. The dial should be set to "ON".
| Car Model | Year | Screen Size | DIP Setting |
|---|---|---|---|
| X1/X3/X5/X6/MINI/1/3/5 Series | 2009-2012 | 6.5 inch | 1358 ON |
| X1/X3/X5/X6/Z4/1/3/5 Series | 2009-2012 | 8.8/10.25 inch | 1458/2358 ON |
| 7 Series | 2009-2012 | 8.8/10.25 inch | 1258/358/458/12358 ON |
AUX Sound Output Configuration
If your original vehicle does not have Bluetooth, audio can be output through the vehicle's auxiliary input. Please choose it before pairing CarPlay or Android Auto.
- Connect the AUX cable to the factory system and plug the external microphone into the CarPlay Box. Select "AUX" from the factory CIC system's audio output options.
- In the box's settings, navigate to: Settings > Factory Settings > Phone link Settings > Disable phone link audio (ON). Then go back and save. A reboot is necessary for changes to take effect.

Diagram showing the connection of the external microphone and AUX OUT. The screen displays "AUX front" as the selected audio source.
Camera Input Configuration
This CarPlay interface supports camera input for clear rear view imagery.
- Enter the system settings: Click "Factory mode" > "Advanced mode" > Enter the password "888888" > "MCUsetup" > Uncheck "A0" option.
- Return to the previous level and click "Restart system" to successfully enable the reversing rear view function.
- If you want to connect the front camera, please choose the "A3" option.

Display of an optional AHD rear view camera with dynamic guidance lines.
Radar and Trajectory Settings
If your aftermarket camera supports reversing trajectory lines, uncheck the A1 box in the MCU Setup to display them. The A2 box is for the aftermarket radar option; uncheck it to use.

MCU Setup interface showing options for radar and trajectory lines (A1, A2 boxes).
5. Operation
Button Control
The system integrates with your vehicle's existing controls for seamless operation.
| Button | Operation | Function |
|---|---|---|
| Call button (Steering Wheel) | Short press | Answer the phone |
| Volume "+" button (Steering Wheel) | Short press | Increase the volume |
| Volume "-" button (Steering Wheel) | Short press | Decrease the volume |
| MENU button (Central Control) | Long press | Switch between OEM screen and interface screen |
| Hazard Light button (Central Control) | Double Click | Switch between OEM screen and interface screen |
| Rotary Controller (Central Control) | Swipe/Click | Control function |

Illustrations of steering wheel buttons for volume and call control, and the central control panel with the MENU button for switching systems.
6. Wireless Connection
The system supports wireless CarPlay and Android Auto. Before using the wireless connection, pair your device via Bluetooth and ensure the vehicle's audio system is set to Bluetooth music mode for optimal connection and audio performance.
6.1 Wireless CarPlay Connection Steps
- Turn on your iPhone's Bluetooth and Wi-Fi, and keep them on.
- Go to the Bluetooth settings of the Smart Box.
- Select the Bluetooth Device name as "CAR Audio_XXXX".
- Pair your iPhone with the device.
- When a request window pops up, select "Pair" and "Use CarPlay".

Screenshots illustrating the steps to connect Wireless CarPlay via Bluetooth pairing on an iPhone.
6.2 Wireless Android Auto Connection Steps
- Turn on your Android phone's Bluetooth and Wi-Fi, and keep them on.
- Go to the Bluetooth settings of the Smart Box.
- Select the Bluetooth Device name as "CAR Audio_XXXX".
- Pair your Android phone with the device.
- After successful Bluetooth pairing, follow the on-screen Android Auto connection process.

Prompt on the Android Auto screen to connect via Bluetooth or insert a USB cable.
Audio Source Verification
After connecting, please check on your iPhone or Android device whether the sound source is correctly set to the original car radio's AUX input or Bluetooth audio.
7. Specifications
| Parameter | Value |
|---|---|
| Operating Voltage | 9-16V, 14.4V (rated) |
| Storage Temperature | -30°C ~ +85°C |
| Operating Temperature | -30°C ~ +75°C |
| Ambient Humidity | ≤98% (at 45°C), 65±5% (rated) |
| Power Consumption Current | 1A (rated), 3A (Max) |
| Shutdown Current | Current: 300mA (Clock is on) |
| Quiescent Current | Less than 3mA |
| Charging Current | ≤2A. When the USB charging current >1A, the host machine should activate the circuit protect function to control the current within 15A and avoid products burning. |
8. Troubleshooting
8.1 Why does the Box's Bluetooth disconnect?
The wireless CarPlay system establishes a Wi-Fi connection to transmit data after device information is confirmed through Bluetooth pairing. To avoid interference, the Bluetooth connection will be disconnected. This is a normal phenomenon.
8.2 Cannot connect to CarPlay, but Bluetooth is already paired?
Please forget the device's Bluetooth connection and reset Wi-Fi on your iPhone (Settings > General > Transfer or Reset [Device] > Reset > Reset Network Settings).
8.3 Why is the wireless CarPlay connection not stable?
- Ensure that the mounted position of the CarPlay box is not blocked by metal components, as this may impair Wi-Fi signal transmission.
- Switch the Wi-Fi channel: Enter the CarPlay box settings: Factory Mode > Connectivity Settings > Hot spot Band. Select channel 1, 6, or 11, depending on the current region.
9. User Tips
- For optimal audio quality, ensure your car's audio system is set to AUX input or Bluetooth music mode before connecting CarPlay/Android Auto.
- If experiencing any noise during installation, check the CAN bus wiring and consider unplugging the designated noise-reducing wire if present.
- Always restart the decoder after making DIP switch changes to ensure the settings are applied correctly.
10. Warranty and Support
For any technical issues or support inquiries, please contact: techsupport@anyfar.com.
For more detailed information, please refer to the official user manual PDF: User Manual (PDF).
You can also visit the manufacturer's website for additional resources: www.anyfar.com.