1. Product Overview
The JONSBO NF-2 Memory Cooler is designed to provide active cooling for DDR4 and DDR5 RAM modules, addressing high temperatures associated with overclocking and intensive use. It features dual 5020 fans and 5V 3PIN ARGB lighting for synchronized light effects with compatible motherboards.
2. Safety Information
- Ensure your PC is powered off and unplugged from the wall outlet before installation.
- Handle components with care to avoid damage to the cooler or your motherboard.
- Do not attempt to modify the cooler or its wiring, as this may void the warranty and cause damage.
- Keep out of reach of children.
3. Package Contents
The NF-2 Memory Cooler package typically includes:
- 1 x NF-2 Memory Cooler (Black or White, ARGB luminous version)
- Mounting screws
- 5020 fan (pre-installed)
- Mounting bracket
- Iron mesh cover (pre-installed)
- Adapter pillars (for 6-32 studs)
- Fixing screws
4. Installation Guide
This memory cooler is designed for easy and quick installation with screw fixation. It is recommended for use with water cooling setups under ATX and MATX motherboards.
4.1 Pre-Installation Check
- Ensure your motherboard has sufficient clearance for the cooler. The height of the memory is limited to 54mm. If using an adapter, the height will increase by 8mm.
- Verify compatibility with your motherboard's ARGB control software (ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync).
4.2 Installation Steps
- Carefully place the memory cooler over your RAM modules.
- Align the mounting bracket with the corresponding motherboard fixing holes.
- Insert the provided fixing screws through the mounting bracket and into the motherboard fixing holes.
- Tighten the fixing screws securely.
- For cases with 6-32 studs: First, screw the adapter copper column into the fixed screw, then screw the assembly into the motherboard copper column holes. This ensures convenient and efficient maintenance.
- Connect the 4Pin PWM cable to an available fan header on your motherboard.
- Connect the 5V 3PIN ARGB cable to an available 5V ARGB header on your motherboard.
5. Operating Instructions
5.1 Fan Operation (PWM)
The NF-2 Memory Cooler features dual 5020 fans with a 4Pin PWM interface. This allows your motherboard to automatically adjust fan speed (600-3600 RPM ±10%) based on temperature, ensuring optimal cooling and noise levels. Connect the 4Pin PWM cable to a compatible fan header on your motherboard.
5.2 ARGB Lighting Control
The cooler supports 5V 3PIN ARGB synchronization, offering 16.8 million colors and various lighting effects. Connect the 5V 3PIN ARGB cable to a compatible ARGB header on your motherboard. You can then control and customize the lighting using your motherboard manufacturer's software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync).
6. Maintenance
Regular maintenance helps ensure optimal performance and longevity of your NF-2 Memory Cooler.
- Dust Cleaning: Periodically use compressed air to remove dust buildup from the fans and heatsink fins. Ensure the fans are not spinning during cleaning to prevent damage.
- Cable Management: Ensure all cables are properly routed and secured to prevent interference with fan blades or other components.
- Inspection: Occasionally inspect the cooler for any signs of wear or damage.
7. Troubleshooting
- Fans not spinning:
- Check if the 4Pin PWM cable is securely connected to the motherboard fan header.
- Ensure the motherboard fan header is enabled in BIOS/UEFI settings.
- ARGB lights not working or incorrect colors:
- Verify the 5V 3PIN ARGB cable is correctly connected to a 5V ARGB header (not a 12V RGB header, which can damage the LEDs).
- Ensure your motherboard's ARGB software is installed and configured correctly.
- Note that due to monitor and light effects, the actual color of the item might appear slightly different from pictures.
- Poor cooling performance:
- Check for dust buildup on the heatsink and fans and clean if necessary.
- Ensure proper airflow within your PC case.
- Verify that the fans are spinning at appropriate speeds (can be monitored via motherboard software).
8. Specifications
| Feature | Specification |
|---|---|
| Origin | Mainland China |
| Model Number | NF-2 |
| Type | Memory Cooler |
| Material | Aluminum |
| RGB Support | A-RGB |
| Power Interface | 4PIN (PWM), 5V-3PIN (ARGB) |
| Product Version | ARGB luminous version |
| Product Color | Black, White (optional) |
| Fan Speed | 600-3600RPM (±10%) |
| Fan Airflow | (1.30-9.11)*2 CFM (MAX) |
| Fan Air Pressure | 0.17-1.6 mmH2O (MAX) |
| Fan Noise | 22.4 dB(A) (MAX) |
| Fan Bearing | Hydraulic Bearing |
| Lifespan | ≥20000h @25℃ |
| Rated Voltage | Fan 12V, LED 5V |
| Rated Current | Fan 0.06A, LED 0.24A |
| Power Consumption | Fan 0.72W (MAX), LED 1.2W |
| Fan Size | 50mm x 50mm x 20mm |
| Heat Sink Size | 146mm x 65mm x 28mm / 5.75 x 2.56 x 1.1 inch |
| Product Weight | 220g |
| Application | Recommended with water cooling under ATX and MATX motherboards. |
9. Warranty and Support
This product is covered by a free returns policy within 90 days. For specific warranty details, technical support, or service inquiries, please contact the seller or refer to the official product documentation.
An official user manual in PDF format is available for download: View User Manual (PDF).
10. User Tips
Based on general practices for PC components, here are some tips for optimizing your experience with the NF-2 Memory Cooler:
- Check Motherboard Compatibility: Always ensure your motherboard has the necessary 4Pin PWM and 5V 3PIN ARGB headers before purchase and installation.
- Optimal Airflow: For best cooling results, ensure your PC case has good overall airflow to dissipate heat effectively.
- Software Control: Utilize your motherboard's dedicated software for precise control over fan speeds and ARGB lighting effects to match your system's aesthetics and performance needs.
- Height Clearance: Double-check the height clearance in your PC case, especially if you have a large CPU cooler or other components that might interfere with the memory cooler's dimensions.