Jaxcam TDYDUTUY-7

Contents

Jaxcam 15MP Tri-Lens PTZ IP Camera User Manual

Model: TDYDUTUY-7

1. Safety Information & Disclaimer

Please read this instruction manual carefully before using the product and keep it properly for future reference.

⚠️ Camera products can only be used for purposes permissible under applicable law and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.

1.2. FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and may radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and back on, the user is encouraged to attempt to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for assistance.

Important: Changes or modifications not expressly approved by the manufacturer responsible for compliance may void the user's authority to operate the equipment.

2. Product Overview

The Jaxcam TDYDUTUY-7 is a 15MP Tri-Lens PTZ IP Camera designed for comprehensive outdoor and indoor surveillance. It features three independent lenses providing multiple perspectives simultaneously, advanced AI functions, and robust weatherproofing.

Jaxcam 15MP Tri-Lens PTZ IP Camera

Figure 2.1: Jaxcam 15MP Tri-Lens PTZ IP Camera with key features highlighted: 15MP Ultra HD, Works with iCSee APP, Motion Detection, Color Night Vision, IP66 Weatherproof, PTZ Control, Two Way Audio, Cloud storage.

2.1. Key Features

  • Tri-Lens System: Monitors three areas simultaneously, displaying three images on the mobile app.
  • High Resolution: 5MP per lens, totaling 15MP for comprehensive coverage.
  • Remote PTZ Control: Pan (0-355°), Tilt (0-90°) for the main lens, and manual Pan (270°), Tilt (90°) for side lenses.
  • Two-Way Audio: Built-in microphone and speaker for real-time communication.
  • AI Functions: Human/Motion Detection and AI Automatic Tracking.
  • Night Vision: Infrared and Full-Color Night Vision modes.
  • Storage Options: Supports local storage via TF card (up to 128GB, not included) and cloud storage (subscription may be required).
  • Connectivity: 2.4GHz WiFi and RJ45 wired networking.
  • Durability: IP66 dustproof and waterproof rating, operating temperature from -35°C to 55°C (-31°F to 131°F).
  • Multi-Platform Access: Supports PC and mobile app (iCSee) remote control, real-time viewing by multiple users.
  • Video Compression: H.264, H.265.
Jaxcam Camera Features Icons

Figure 2.2: Visual summary of camera features including HD 3 Lens 15MP, WiFi Camera, 3-Screen Display, 2-Way Audio, Weatherproof, AI Human Detect, Night Vision, and PTZ Control.

3. Specifications

FeatureSpecification
Model NumberTDYDUTUY-7
Brand NameJaxcam
Lens QuantityTri-Lens
Megapixels15MP (3 x 5MP lenses)
High Definition5.0 Megapixels (per lens)
Lens (mm)3.6mm
SensorCMOS (Sony Brand)
Viewing Angle360° (overall coverage)
Movement Range (Pan)0°-360° (main lens)
Movement Range (Tilt)-10°-180° (main lens)
ConnectivityWIFI (2.4GHz), RJ45 Ethernet Port
Supported WiFi2.4GHz (5GHz not supported)
Video Compression FormatH.264, H.265
Audio OutputTwo Way Audio (Built-in speaker and microphone)
AI FunctionsMotion Detection, Human Tracking
Color Night VisionYes
IR Distance30-50M
Minimum Illumination0.001lux
StorageTF Card (up to 128GB), Cloud Storage
Power Mode/SourceMains Electricity (Normal Power Supply)
Power Consumption<3W
IP RatingIP66
Working Temperature-35°C ~ 55°C (-31°F ~ 131°F)
SceneIndoor and outdoor
Supported Mobile SystemsAndroid, iOS
Supported Operating SystemsWindows Vista, 7, 8, 10, 2003, 2008, macOS
Alarm TypeLocal Alarm, FTP Photo, Email Photo
Shell MaterialPlastic
CertificationCE, FCC, RoHS

4. Setup Guide

4.1. Package Contents

Please check the package contents upon unboxing. If anything is missing or damaged, contact customer support.

  • Jaxcam 15MP Tri-Lens PTZ IP Camera
  • Power Adapter
  • Mounting Screws
  • User Manual (this document)

4.2. App Installation (iCSee)

  1. Download: Search for "iCSee" in your mobile device's App Store (iOS) or Google Play Store (Android). Alternatively, scan the QR code provided in the Quick Start Guide (page 3 of PDF manual) to download the app.
  2. Install: Follow the on-screen instructions to install the iCSee app on your smartphone.

4.3. Account Registration & Login

  1. Open App: Launch the iCSee app.
  2. Sign Up: Tap "Sign Up" and follow the prompts to create a new account using your phone number or email address.
  3. Alternative Login: You can also log in using WeChat, Facebook, Line, or as a "Visitor". Note that some functions may not be available when logged in as a "Visitor".

4.4. Camera Connection

Ensure your mobile device is connected to your home's 2.4GHz Wi-Fi network before proceeding. This camera does not support 5GHz Wi-Fi.

  1. Preparation:
    • Connect the camera to its power supply.
    • Place the camera close to your mobile device and Wi-Fi router.
    • After powering on and self-check, long-press the "Reset" button for 8 seconds. Release it when you hear a prompt tone indicating a successful reset. Wait for 1 minute before proceeding.
  2. Connect via App:
    • Open the iCSee app. Tap the "+" icon in the upper right corner of the main interface.
    • Select "WiFiCamera" and follow the device's voice prompts (tap "Next").
    • On the "Router Setting" interface, select your Wi-Fi router and enter its password. Tap "Confirm" to proceed to the "Scan Code Pairing instruction" interface.
    • Once successfully connected, set a new password for your camera and tap "Confirm".
    • Add the device successfully, give it a name, and tap to open the real-time preview screen.

Method B: Bluetooth Connection (Alternative)

  1. Preparation:
    • Connect the camera to its power supply.
    • Place the camera close to your mobile device and Wi-Fi router.
    • After powering on and self-check, long-press the "Reset" button for 8 seconds. Release it when you hear a prompt tone indicating a successful reset. Wait for 1 minute before proceeding.
  2. Connect via App:
    • Ensure your phone's WLAN (Wi-Fi) is turned on, then pair and connect.
    • Open the iCSee app. Tap the "+" icon to enter the automatic device search interface.
    • Tap "Other distribution networks and adding methods", then select "Nearby Cameras".
    • Tap the searched camera to add it, then set the login name and password for the camera.

4.5. Mounting Instructions

The camera is designed for both indoor and outdoor use. Choose a mounting location that provides the desired viewing angle and is within Wi-Fi range or accessible for an Ethernet cable.

  1. Select Location: Identify a suitable wall or ceiling location. Ensure the surface is strong enough to support the camera.
  2. Mark Holes: Use the provided mounting template (if any) or the camera base to mark the positions for drilling.
  3. Drill Holes: Drill pilot holes at the marked positions.
  4. Secure Camera: Insert wall anchors (if needed) and secure the camera base to the surface using the provided screws.
  5. Adjust Angle: Once mounted, you can adjust the camera's pan and tilt angles as needed. The side lenses can be manually adjusted for optimal coverage.

5. Operating Instructions

5.1. Live View & Multi-Screen Display

After successfully connecting your camera, open the iCSee app to access the live view. The Tri-Lens system allows you to view three different camera feeds simultaneously on your mobile app screen.

Three Lens Three Screen Display

Figure 5.1: The camera's three lenses provide multiple perspectives, displayed simultaneously on the iCSee app for comprehensive monitoring.

5.2. PTZ Control

The main lens of the camera supports Pan, Tilt, and Zoom (PTZ) functions remotely via the iCSee app. The two side lenses offer manual adjustment.

Remote PTZ Control and Rotation Ranges

Figure 5.2: Remote control of camera rotation. Main lens: horizontal 0-355 degrees, vertical 0-90 degrees. Left and right PTZ cameras support 270° pan rotation (manual) and 90° tilt adjustment (manual).

5.3. Two-Way Audio

Use the two-way audio feature to communicate with people near the camera. This is useful for greeting visitors or deterring intruders.

  1. In the live view interface, tap the microphone icon to speak.
  2. Tap the speaker icon to listen to audio from the camera's vicinity.
Two-Way Audio Feature

Figure 5.3: Engage in two-way communication with individuals in front of the camera at any time, from anywhere.

5.4. Motion Detection & Alerts

The camera features advanced AI human detection and motion detection capabilities. When motion is detected, the camera can send instant app alarms and even trigger a siren.

  1. Enable Detection: Go to camera settings in the iCSee app and enable "Motion Detection" or "Human Detection".
  2. Configure Alerts: Set up notification preferences, such as push notifications to your phone or email alerts.
  3. AI Automatic Tracking: If enabled, the camera will automatically track the movement of detected humans within its field of view.
Motion Detection Alert

Figure 5.4: The camera supports motion detection and will send an instant app alarm when motion is detected. It also supports a siren alarm for deterrence.

AI Automatic Tracking

Figure 5.5: Once motion is detected, the camera will automatically follow the movement of the detected subject.

5.5. Night Vision Modes

The camera supports both infrared (black and white) and full-color night vision. The smart IR-Cut filter automatically switches between day and night modes.

Full Color Night Vision

Figure 5.6: Comparison of day view, standard night view (black and white), and full-color night vision.

5.6. Recording & Storage

The camera supports continuous recording or event-triggered recording to a local TF (Micro SD) card or to cloud storage.

  1. TF Card Storage: Insert a Micro SD card (up to 128GB, not included) into the camera's external SD card slot. The camera will automatically begin recording based on your settings.
  2. Cloud Storage: The camera also supports cloud storage services. Refer to the iCSee app for subscription details and activation.
TF Card & Cloud Storage

Figure 5.7: The camera offers flexible storage options including an external SD card slot for local storage (up to 128GB) and support for cloud services.

5.7. Multi-User Viewing

You can share access to your camera's live feed with family members or trusted individuals through the iCSee app.

Multi-User Viewing

Figure 5.8: Multiple users can simultaneously view the camera's live feed on various devices, enhancing shared security.

Video 5.1: Product demonstration showcasing PTZ control, three-screen display, human tracking, night vision capabilities, two-way audio, and IP66 weather resistance.

6. Maintenance

6.1. Cleaning

To ensure optimal performance and image clarity, periodically clean the camera's lenses and housing.

  • Use a soft, dry cloth to wipe the camera body.
  • For lenses, use a lens cleaning cloth and a specialized lens cleaning solution. Avoid abrasive materials or harsh chemicals.

6.2. Firmware Updates

Keep your camera's firmware updated to ensure the latest features, security patches, and performance improvements. Check for updates periodically through the iCSee app settings.

7. Troubleshooting

7.1. Device Cannot Connect to Router

  • Check Wi-Fi Network: Ensure your Wi-Fi network is working correctly (test with your mobile phone).
  • Verify Password: Double-check that the Wi-Fi password is entered correctly.
  • SSID/Password Characters: Ensure your router's Wi-Fi password and SSID do not contain special characters (e.g., @#$%).
  • Distance: The distance between the camera, router, and mobile phone should be within 1.5 meters (5 feet).
  • Router Configuration: The camera only supports 2.4GHz Wi-Fi. If you have a dual-band router, ensure the 5GHz band is turned off during setup.
  • Try Another Device: Attempt connection using a different Android/iOS phone.
  • Reset Camera: Perform a factory reset on the camera (see 7.3).

7.2. How to Recover Camera Password

If you forget the camera's password, you must reset the camera to its factory default settings and then reconfigure it.

7.3. How to Reset Camera to Factory Settings

  • If Camera is Online: You can find the reset option within the iCSee mobile app or PC software.
  • If Camera is Offline: Press and hold the reset button on the camera's connection line for 15-20 seconds.

7.4. Cannot Find Video File in Playback

  • Check TF Card Status: Verify the status of the TF card in the camera's settings (disk information).
  • Replace TF Card: Try replacing the TF card with a new one to see if the issue is resolved.

7.5. App Advertisements

You can turn off advertisements in the iCSee app by navigating to "Me" > "Tools" > "Ad".

8. User Tips

  • Wi-Fi Compatibility: Always ensure your router is set to 2.4GHz when connecting the camera, as it does not support 5GHz Wi-Fi. If you have a dual-band router, temporarily disable the 5GHz band during setup for easier connection.
  • Wired Connection: For the most stable connection, utilize the RJ45 Ethernet port if possible, especially in areas with weak Wi-Fi signals.
  • Optimal Placement: When mounting, consider both Wi-Fi signal strength and the desired coverage area. Test the live view from your intended mounting spot before final installation.

9. Warranty and Support

Your Jaxcam TDYDUTUY-7 camera comes with a manufacturer's warranty. Please refer to your purchase documentation for specific warranty terms and duration.

For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the manufacturer's customer service. Keep your proof of purchase handy when contacting support.

© Jaxcam. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.