VEKOOTO 4PIN AHD 1080P Truck Side Rear View Camera

Contents

VEKOOTO 4PIN AHD 1080P Truck Side Rear View Camera

User Installation and Instructions Manual

1. Product Overview

The VEKOOTO 4PIN AHD 1080P Truck Side Rear View Camera is a high-definition surveillance solution designed for vehicles such as buses, vans, caravans, and trucks. It provides clear, wide-angle views to enhance safety during driving and maneuvering. Featuring advanced AHD technology, infrared night vision, and a robust waterproof design, this camera is built for durability and reliable performance in various conditions.

VEKOOTO AHD Camera with 4-pin connector

Figure 1: VEKOOTO AHD Camera with its 4-pin connector.

Key Features:

  • High Definition: 1920*1080P effective pixels with AHD 1080P technology.
  • Advanced Chipset: Equipped with a Top GC2053 AHD Chip for superior image processing.
  • Wide-Angle View: 140° wide-angle lens to minimize blind spots.
  • Night Vision: Infrared (IR) night vision for clear visibility in low-light or dark conditions.
  • Durable Construction: High-quality stainless steel and aluminum alloy body, anti-scratch, and IP68 waterproof rating.
  • Temperature Resilient: Operates reliably in temperatures ranging from -20°C to 65°C.
  • Standard Connection: Utilizes a 4-pin connector for secure and stable video transmission.

2. Setup and Installation

Before installation, ensure all components are present and undamaged. Refer to the detailed user manual PDF provided by the seller for comprehensive wiring diagrams and specific vehicle mounting instructions.

Package Contents:

Package contents: AHD Camera and Video Cable

Figure 2: Typical package contents including AHD Camera and Video Cable (length may vary).

  • AHD Camera Unit
  • Video Cable (length varies by model, e.g., 5M, 10M, 15M, 20M)
  • Mounting Hardware (if included)

Important Notes:

  • AHD Monitor Required: This AHD camera is only compatible with AHD monitors or MDVR/DVR systems that support AHD input. It will not work with standard analog (CVBS) monitors.
  • Power Supply: Ensure the camera receives a stable 12V DC power supply.

Installation Steps (General):

  1. Choose Mounting Location: Select a suitable location on your vehicle (side or rear) that provides the desired viewing angle and is free from obstructions. Ensure the camera is securely mounted to prevent vibration.
  2. Route Cables: Carefully route the video cable from the camera to your AHD monitor/MDVR/DVR unit. Ensure cables are protected from heat, sharp edges, and moving parts.
  3. Connect Camera: Connect the 4-pin connector from the camera to the corresponding 4-pin input on your AHD monitor/MDVR/DVR.
  4. Connect Power: Connect the power wires (usually integrated into the 4-pin cable or separate) to a suitable 12V DC power source in your vehicle. Ensure correct polarity.
  5. Test System: Before finalizing the installation, power on your vehicle and monitor to test the camera's functionality. Adjust the camera angle as needed for optimal view.
  6. Secure Wiring: Once tested, secure all wiring with cable ties or clips to prevent damage and ensure a tidy installation.

3. Operating Instructions

Once properly installed and powered, the camera operates automatically when the vehicle's ignition is on (or when connected to a switched power source).

Viewing the Feed:

  • The camera feed will be displayed on your connected AHD monitor or recorded by your MDVR/DVR system.
  • The 140° wide-angle lens provides a broad view, making it easier to observe surroundings and avoid obstacles.
140 degree wide-angle lens view

Figure 3: Illustration of the 140° wide-angle view provided by the camera.

Night Vision Function:

  • The camera automatically switches to infrared (IR) night vision mode in low-light or dark conditions.
  • Infrared light is actively projected by the camera, and the reflected light is used to form an image, providing clear black-and-white visuals even in complete darkness.
Night vision function demonstration

Figure 4: Demonstration of the camera's night vision capabilities.

4. Maintenance

The VEKOOTO camera is designed for durability and requires minimal maintenance.

  • Cleaning the Lens: Periodically clean the camera lens with a soft, damp cloth to remove dirt, dust, or water spots that may obscure the view. Avoid abrasive cleaners.
  • Checking Connections: Occasionally inspect the cable connections to ensure they are secure and free from corrosion or damage.
  • Housing: The camera's stainless steel and aluminum alloy housing is resistant to scratches and corrosion. No special maintenance is required for the housing.
  • Waterproof: The IP68 waterproof rating ensures protection against dust and water immersion. Avoid disassembling the camera, as this may compromise its waterproof seal.
Durable rear camera features

Figure 5: Durability features including IP68 waterproof rating and temperature resistance.

5. Troubleshooting

If you encounter issues with your camera, try the following troubleshooting steps:

Problem Possible Cause Solution
No image on monitor
  • Loose or disconnected cables
  • No power to camera/monitor
  • Incompatible monitor (not AHD)
  • Faulty camera/monitor
  • Check all 4-pin connections and power cables.
  • Ensure camera and monitor are receiving power.
  • Verify your monitor supports AHD input.
  • Test with another known working camera/monitor if available.
Poor image quality (blurry, distorted)
  • Dirty lens
  • Loose cable connection
  • Interference
  • Low power supply
  • Clean the camera lens with a soft cloth.
  • Secure all cable connections.
  • Ensure power supply is stable (12V DC).
  • Check for strong electromagnetic interference sources.
Night vision not working
  • Insufficient darkness for activation
  • Faulty IR LEDs
  • Test in complete darkness.
  • Contact support if IR LEDs are visibly not illuminating.

6. Specifications

Model 4PIN AHD 1080P Truck Side Rear View Camera
Brand VEKOOTO
Resolution 1920*1080P (AHD 1080P)
Effective Pixels 2,000,000 pixels
Chipset GC2053 AHD Chip
Lens Material Plastic + Glass
Viewing Angle 140° Wide-Angle
Night Vision Infrared (IR) Night Vision
Shell Material Stainless Steel + Aluminum Alloy
Waterproof Rating IP68
Operating Temperature -20°C to 65°C
Dimensions 46mm * 53mm (approx.)
Connection Type Wired (4-pin connector)
Video Cable Length Varies by SKU (e.g., 5M, 10M, 15M, 20M)

7. User Tips

  • Optimal Clarity: Always ensure the camera lens is clean and free from dirt, snow, or ice for the clearest possible image.
  • Pre-Mounting Test: Before permanently mounting the camera and routing all cables, perform a quick test to ensure everything is working correctly.
  • Cable Management: Use cable ties and protective conduits to secure wiring, preventing damage from vehicle movement, heat, or environmental factors.
  • Monitor Settings: Adjust your AHD monitor's brightness, contrast, and color settings to optimize the camera's display for your viewing preference.

8. Warranty and Support

For warranty information, technical support, or any product-related inquiries, please contact the seller directly through your purchase platform. Keep your order details handy for faster assistance.

A detailed user manual in PDF format is available from the seller for further installation and operational guidance.

© 2023 VEKOOTO. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.