1. Introduction
Thank you for choosing the fenvi WiFi 7 BE200 BT5.4 M.2 Wireless WiFi Adapter. This high-performance adapter provides cutting-edge Wi-Fi 7 (802.11BE) connectivity and Bluetooth 5.4 capabilities for your compatible system. Please read this manual carefully before installation and use to ensure optimal performance and safety.
2. Product Features
- Wi-Fi 7 (802.11BE) Support: Experience the latest generation of Wi-Fi technology for faster speeds and improved efficiency.
- Tri-Band Connectivity: Operates across 2.4 GHz, 5 GHz, and 6 GHz bands for versatile and robust wireless connections.
- Ultra-Fast Speeds: Achieves a maximum throughput of up to 5.8 Gbps (2x2, 320 MHz, 4K QAM).
- Bluetooth 5.4: Advanced Bluetooth connectivity for seamless pairing with your devices.
- M.2 Interface: Designed for NGFF (M.2) slots.
- Advanced Technologies: Supports MU-MIMO and OFDMA for enhanced network performance.
- System Compatibility: Exclusively designed for Windows 10/11 64-bit operating systems.
3. Package Contents
Please verify that all items are present in your package:
- BE200 WiFi Card
- Antenna Set (may vary based on purchased variant: 12DB set, 6DB set, or laptop set)
- Antenna Cables
- Mounting Bracket/Adapter (if purchasing a desktop set)


4. Specifications
| Attribute | Value |
|---|---|
| Brand Name | fenvi |
| Model | BE200NGW |
| Item Type | Wireless WiFi Card |
| Wireless Communication Standard | 802.11.be (WiFi 7) |
| Frequency Band Class | Tri-Band (2.4GHz, 5GHz, 6GHz) |
| Max Wireless Transmission Rate | Up to 5.8 Gbps (5800Mbps) |
| Bluetooth Protocol | Bluetooth 5.4 |
| Interface Type | M.2 |
| Application | Laptop (and Desktop with adapter) |
| Applicable Network Type | Ethernet (Wireless) |
| Heat Dissipation | No support (passive cooling) |
| Supported Operating Systems | Windows 10/11 64-bit |

5. Compatibility
The fenvi BE200 WiFi card is compatible with a range of systems from manufacturers such as Samsung, Dell, Sony, ACER, ASUS, MSI, Clevo, Terransforce, and Hasee.
Important Note: This product does NOT support AMD, IBM, Thinkpad, Lenovo, or HP laptop/desktop systems.


6. Installation Guide
Safety First: Always ensure your PC is completely powered off and unplugged before installing the WiFi card. Failure to do so may result in short circuits or damage to your components.
6.1. Hardware Installation
Follow these steps to install your fenvi BE200 WiFi card:
- Prepare your PC: Power off your computer and disconnect all cables. Open your PC case to access the motherboard.
- Locate M.2 Slot: Identify an available M.2 NVME slot (Key E) on your motherboard.
- Insert WiFi Card: Gently insert the BE200 WiFi card into the M.2 slot at an angle. Push down until it clicks into place.
- Secure the Card: Use the provided screw to secure the WiFi card to the motherboard.
- Connect Antenna Cables: Carefully connect the antenna cables to the corresponding 'MAIN' and 'AUX' ports on the WiFi card.
- Install Antennas: If using a desktop adapter, attach the external antennas to the adapter's connectors. If using laptop antennas, ensure they are properly routed and secured within your laptop chassis.
- Close PC Case: Once the card and antennas are securely installed, close your PC case and reconnect all cables.
6.2. Bluetooth Functionality Note
If the Bluetooth functionality does not work after installation, it may be necessary to shield a specific pin on the wireless network card. This involves carefully applying tape to shield a pin, as shown in some product diagrams. Exercise extreme caution to avoid damaging the card or other components.
7. Driver Installation
After hardware installation, you will need to install the appropriate drivers for your operating system (Windows 10/11 64-bit).
- Download Drivers: You can download the latest drivers from either the Fenvi website or Intel's official website:
- Fenvi Website: https://www.fenvi.com/drive.html?keyword=BE200NGW
- Intel Official Website: https://www.intel.com/content/www/us/en/products/sku/230078/intel-wifi-7-be200/downloads.html
- Clean Previous Drivers (if applicable): If you are replacing an existing wireless card, it is recommended to check for and disable all previous wireless drivers before installing new ones. You may need to enable 'Show hidden devices' in Device Manager to see all drivers.
- Install Drivers: Run the downloaded driver installer and follow the on-screen prompts.
- Restart PC: After the driver installation is complete, restart your computer.
8. Operating Instructions
8.1. Connecting to Wi-Fi
- After successful driver installation and PC restart, click on the Wi-Fi icon in your system tray.
- Select your desired Wi-Fi network from the list of available networks.
- Enter the network password if prompted and click 'Connect'.
8.2. Pairing Bluetooth Devices
- Ensure Bluetooth is enabled on your computer (check Windows Settings > Devices > Bluetooth & other devices).
- Put your Bluetooth device into pairing mode.
- On your computer, click 'Add Bluetooth or other device' and select 'Bluetooth'.
- Choose your device from the list and follow any on-screen instructions to complete pairing.
9. Troubleshooting
9.1. No Wi-Fi Signal or Connection Issues
- Check Card Insertion: Ensure the network adapter is securely inserted into its M.2 slot. If there is any looseness, carefully reinsert it.
- Inspect Gold Fingers: Verify that the gold contacts (gold fingers) of the network card are clean and making good contact with the motherboard socket. If foreign objects are present, gently wipe them away before reinserting the adapter.
- Driver Status: Open Device Manager (search in Windows) and check if the Intel Wi-Fi 7 BE200 device is listed without any error symbols (e.g., yellow exclamation mark). If there are errors, try reinstalling the drivers.
- Antenna Connection: Ensure all antenna cables are firmly connected to the WiFi card and the external antennas (if applicable) are properly attached.
9.2. Bluetooth Not Working
- Driver Status: In Device Manager, check if the Intel Bluetooth device is listed without any error symbols. Reinstall Bluetooth drivers if necessary.
- Pin Shielding: As mentioned in the installation guide, if Bluetooth is not detected or functioning, you may need to apply tape to shield a specific pin on the wireless network card. Refer to product diagrams for guidance on which pin to shield.
10. User Tips
- Users report that the fenvi BE200 WiFi 7 card works very well as described, providing reliable and fast wireless connectivity.
- For optimal performance, always ensure you have the latest drivers installed from the official Fenvi or Intel websites.
11. Maintenance
- Keep Drivers Updated: Regularly check for and install the latest Wi-Fi and Bluetooth drivers from the official Fenvi or Intel websites to ensure optimal performance and security.
- Physical Inspection: Periodically inspect the card and antenna connections to ensure they are secure and free from dust or debris.
- Cleaning: If necessary, gently clean the card and surrounding area with compressed air to remove dust buildup.
12. Warranty and Support
For any technical issues, warranty claims, or further assistance, please contact the seller or manufacturer directly. A detailed user manual in PDF format may also be available for download: View User Manual (PDF).