I. Warning & Safety Information
- Do not operate the wipers without water to avoid damaging the rubber blade.
- Avoid forcibly bending the wiper arm to prevent deformation.
- Do not touch the rubber blade with sharp objects.
II. Setup & Installation
This section guides you through the process of replacing your rear wiper blade.
- Prepare the Wiper Arm: Lift the rear wiper arm away from the rear window until it locks into an upright position.
- Remove Old Blade: Carefully detach the old wiper blade from the wiper arm. This usually involves pressing a release tab or sliding the blade off the hook/clip.
- Install New Blade: Align the locking clip of the new J-Leslie wiper blade with the wiper arm's attachment point. Gently press the blade onto the arm until you hear a click, indicating it is securely fastened.
- Test Operation: Carefully lower the wiper arm back onto the window. Activate the rear wiper switch to test for proper operation and ensure it cleans the window effectively without obstruction.

III. Operating Instructions
Your J-Leslie rear wiper blade is designed for efficient clearing of your rear windshield.
- Ensure the rear windshield is wet with water or washer fluid before operating the wiper to prevent damage to the blade and glass.
- Activate the rear wiper via your vehicle's control stalk or button, typically located near the steering wheel.
- Use in conjunction with your vehicle's rear washer fluid system for optimal cleaning of dirt and debris.

IV. Maintenance
Proper maintenance extends the life and performance of your wiper blade.
- After Each Use: Gently tap the rubber blade to dislodge any accumulated debris, such as leaves, insects, or dirt.
- Cleaning: Periodically clean the rubber blade with a soft cloth and mild soap and water to remove road film and grime.
- Environmental Exposure: Avoid prolonged exposure to direct sunlight or high-temperature environments when the vehicle is parked, as this can degrade the rubber.
- Winter Care: Do not force-start the wipers when ice is present on the windshield. Allow the defroster to melt the ice first to prevent damage to the blade and wiper motor.
V. Troubleshooting
Common issues and their solutions:
- Wiper does not operate:
- Check the vehicle's power supply to the wiper motor and inspect the wiper motor itself for any issues.
- Incomplete cleaning (streaking or missed spots):
- This often indicates an aged or damaged rubber blade. Replace the wiper blade with a new one.
- Excessive noise (squeaking or chattering):
- The wiper arm angle might be incorrect, causing uneven pressure. Try adjusting the wiper arm angle. If the noise persists, the wiper blade components may need replacement.
VI. Specifications
| Product Name | Windshield Wiper |
| Brand | J-Leslie |
| Type | Rear Windshield Wiper |
| Length | 14 inches (360mm) |
| Material | Natural rubber + High-strength plastic |
| Color | Black |
| Fitment | For Porsche Cayenne MK3 9YA (2018-2023) |
| Package Dimensions | Approx. 45cm x 20cm |


VII. User Tips
- Upon receiving your wiper blade, inspect the material quality to ensure it meets your expectations for durability.
- Ensure the wiper blade is installed correctly and securely to maximize its lifespan and cleaning effectiveness. A proper fit prevents premature wear and noise.
VIII. Warranty & Support
Return & Exchange Policy: Defective products are eligible for return or exchange. Please contact your seller directly for specific instructions and support regarding any product issues or warranty claims.