Fredorch F7S Automatic Sex Machine User Manual

Introduction

Thank you for choosing the Fredorch F7S Automatic Sex Machine. This manual provides detailed instructions for the safe and effective use of your device. Please read it thoroughly before assembly and operation to ensure optimal performance and user satisfaction.

Specifications

Package Contents

The basic package includes:

• 1 X Host principal (main machine unit)
• 2 X T-Bar (Frame support)
• 2 X Tie rods with "quick joint", one shorter (30cm), the other longer (50cm)
• 1 X Power supplier package (with appropriate plug for your country)
• 1 X Wired speed controller (Included with Wired or Wired Wireless versions)
• 1 X Wireless remote (Included with Wired Wireless or App Voice versions)
• 1 X Instructions and hidden packaging

Note: The number of accessories may vary based on the specific version purchased. What you see in the product image is what you will receive.

Setup Instructions

Follow these steps to assemble your Fredorch F7S Automatic Sex Machine:

1. Installation of 2-tube bracket: Insert the long pipe into the short pipe clamp and reinforce it by twisting the screw clockwise with the inner hexagonal wrench.

   

2. Assembly of main engine and pipe bracket: Reversely loosen the quick pipe clamp wrench, insert the pipe bracket into the fast pipe clamp and pull the fast pipe clamp wrench to lock it.
3. Install the self-locking fast joint on the sucker rod: Joints and rods are threaded joints. Joints are twisted clockwise into rod threads, butterfly screw is counterclockwise reinforced joints.

   

4. Install the sucker rod on the main engine: One end of the extension rod thread is inserted into the main engine through the main engine casing and connected with the sliding block in the main engine, and then screwed into the sliding block thread hole clockwise.
5. Install Power Supply and Speed Regulator: Install the power plug and governor into the corresponding plug of the control box.
6. Installation of self-locking joints and appliances: The small screw can adjust the tightness of the quick pipe clamp and adjust itself according to the need.

Video Guide: Assembly and Basic Operation

This video demonstrates the assembly process, including attaching the extension rods and adjusting the machine's components.

Operating Modes

The Fredorch F7S offers three versions of control:

1. Wired Version: Basic version, controlled by a wired speed controller.

   

2. Wired and Wireless Version: Includes both wired speed controller and a wireless remote control.

   

3. Wireless APP Voice Version: The most upgraded version, featuring wireless remote control and APP mobile phone function with voice control.

   APP Installation (Zhenyi APP)

   1. Download Software: Scan the QR code below with your mobile phone to download the software. Open it in your browser, and the download will be completed. Find the APP icon on your phone's home screen and click to open it.

      

   2. Account Registration and Login: Apple mobile phone users can directly log in with their ID. Other users need to register an account by entering their email and password.
   3. Connect the Device: Turn on Bluetooth, enter the main interface, and click "Add Device". Scan the device code or enter the binding code 1150009. Once "Connection Successful" is displayed, the device can be used.
   4. Configure Wireless Network: For the machine, enter the password of the current wireless network. If the machine is successfully connected to the network, the device will be found. If not, repeat step 4. After configuration, click Next and then Finish to enter the main screen.

   APP Operating Modes

   • Official Mode: A pre-set frequency conversion mode by the system. Click on the mode to switch between different frequency conversion frequencies.
   • Swipe Mode: Slide your finger up and down to change the machine's extension speed. Sliding down sets a low speed, while sliding up sets a high speed. For a satisfactory mode, click the save button in the upper right corner. You can save and name modes for quick access.
   • Remote Mode: You can remotely control the machine. After clicking "Invite to Join", an invitation code will be generated. The other party can download the APP, accept the invitation, and enter the invitation code to control the machine.
   • Voice Control Mode: Click to turn on the voice control switch. The machine accepts voice volume instructions. The louder the voice, the faster the machine runs.

     

     Voice Command Instructions:

     • Call out "Xiao Yi, Xiao Yi" to activate voice control.
     • "Move": Machine starts (say "Move" once to switch to a different mode).
     • "Stop": Machine stops.
     • "Faster": Machine accelerates.
     • "Slower": Machine decelerates.
     • "Gentle Mode": Low-speed variable frequency mode.
     • "Flirtatious Mode": Medium-speed variable frequency mode.
     • "Macho Mode": Medium-high speed variable frequency mode.
     • "Crazy Mode": High-speed variable frequency mode.

     Note: If the device is idle for less than one minute, there is no need to call out "Xiao Yi" again. If it has been idle for more than one minute, you need to call out "Xiao Yi" again. Long press on the remote control to gradually adjust the speed, and short press once for a sudden change in speed. Combining these can achieve stepless speed adjustment.

   • Video Mode: In this mode, you can call up the mobile phone video and run the machine while watching the video.

Accessories

The Fredorch F7S is compatible with a range of accessories to enhance your experience:

• Extension Rods: Short (30cm) and long (50cm) poles can be used on both sides or single sides.

  

• Dual Head Vacuum Lock Interface (F026): Allows the machine to access an additional accessory. Both interfaces are vacuum lock interfaces.

  

• Extension Bar (F024): Can cushion the vibration brought by the machine and extend the distance.

  

• Spring Extension Bar (F021): Can extend the length of the telescopic rod and reduce the shock caused by the machine.

  

• Triple Plug Adapter (F020): Allows triple plug accessories to be used on the vacuum-lock interface of the machine.

  

• Large Vacuum Lock Plug (F025BK): Allows for the conversion of larger dildos. Allows dildos to be used on machines with vacuum lock plugs.

  

• Double-ended Vacuum Lock Coupling (F027bk): Allows modification of large dildos or two larger dildos. Allows dildos to be used on machines with vacuum lock connectors.

  

• Suction Cup (F022S-YS): Suction cup dildo can be attached to the vacuum lock machine. Allows adsorption dildo diameter 0-9cm.

  

• Various Dildos and Masturbation Cups: The machine is compatible with a range of dildos and masturbation cups, including those with specific dimensions and weights.
  • Dildo 1: 18cm length, 3.54cm width, 235g.

    

  • Men's Masturbation Cup: 24.5cm length, 6cm width.

    

  • Dildo 2: 20.5cm length, 3.8cm width, 310g.

    

  • Dildo 3: 20cm length, 3.6cm width, 340g.

    

  • Dildo 4: 20cm length, 3.5cm width, 275g.

    

  • Dildo 5: 28cm length, 4.4cm width, 620g.

    

  • Dildo 6: 18cm length, 2.5cm/4.1cm/4.6cm width, 260g.

    

Maintenance

• Cleaning: After each use, disconnect the machine from power. Clean all accessories and contact surfaces with a damp cloth and mild soap. Rinse thoroughly with water and dry completely before storage. Do not immerse the main unit in water.
• Lubrication: Always use a water-based lubricant with the machine and its accessories to ensure smooth operation and prevent damage to materials.
• Storage: Store the machine and its accessories in a cool, dry place away from direct sunlight and extreme temperatures. Keep out of reach of children.

Troubleshooting

• Automatic Jump Protection (Cable Version): Ensure the governor is properly installed and turned on before operating the cable version. Failure to do so will activate automatic jump protection.
• Safety Precautions: Avoid placing hands or limbs on the rotating rocker arm during operation. Do not use the machine to support glassware or any objects that could cause harm.
• Overcurrent Protection: The machine is equipped with overcurrent protection. If the machine stops running unexpectedly, unplug the power supply for 30 seconds, then plug it back in and turn it on again.
• Unusual Noises or Malfunctions: If you experience any unusual noises, vibrations, or the machine fails to operate as expected, immediately turn off and unplug the device. Consult the user manual or contact customer support.
• Inefficient Voice Recognition (APP Version): Ensure you complete the speaking instructions and maintain standard pronunciation for optimal voice control. Otherwise, speech recognition may be relatively inefficient.

User Tips

• Experiment with Settings: The F7S offers adjustable stroke length (1-15cm) and angle (-45° to +90°). Experiment with these settings to find what is most comfortable and pleasurable for you.
• Start Slow: When trying new accessories or settings, always start with the slowest speed and gradually increase to your desired intensity.
• Secure Attachments: Always ensure all accessories are securely attached to the quick-plug interfaces before starting the machine to prevent accidental detachment during use.
• Explore APP Features: If you have the Wireless APP Voice version, take advantage of the various pre-set modes, swipe control, and voice commands for a hands-free experience.

Warranty and Support

For any questions, technical support, or warranty claims, please contact the seller directly. You may also refer to the official user manual PDF for additional details and diagrams:

View User Manual (PDF)