Introduction
Welcome to the user manual for your SoundPEATS Q40 HD Neckband Bluetooth Headphones. This guide provides detailed instructions on how to set up, operate, maintain, and troubleshoot your device to ensure the best audio experience. Please read this manual carefully before using your headphones.

SoundPEATS Q40 HD Neckband Bluetooth Headphones.
Package Contents
Please check the package for the following items:

All items included in the SoundPEATS Q40 HD package.
- SoundPEATS Q40 HD Wireless Earbuds
- User Manual
- Charging Case
- USB Type-C Charging Cable
- Replaceable Ear Pads Set (XL, L, M, S, XS sizes)
- Replaceable Ear Supports Set (L, M, S sizes)
Understanding the Headphones
Familiarize yourself with the different parts and controls of your SoundPEATS Q40 HD headphones.

Labeled diagram of the SoundPEATS Q40 HD headphones.
- Type-C charging port
- Volume+/Next song button
- Multi-function button
- Microphone hole
- LED indicator light
- Volume-/Previous song button
Setup
Wearing Instructions
For optimal sound quality and comfort, ensure the headphones are worn correctly.

Proper wearing of the SoundPEATS Q40 HD headphones.
- Confirm the left/right earphone.
- Insert the earphone head into the ear canal, adjust the ear support to find the best angle, so that the earphone fits tightly in the ear and the ear cap can seal the ear canal.
Charging the Earphones
Before first use, ensure your headphones are fully charged.

Charging the SoundPEATS Q40 HD headphones.
- Open the rubber plug of the USB charging port on the headphone control box.
- Connect the USB Type-C charging cable to the port and a power source.
- The LED indicator light will show charging status.
Important Notes on Charging:
- When opening the charging cover, do not use excessive force to stretch it to prevent the charging cover from falling off.
- After charging, please close the charging cover tightly to prevent liquid from entering.
- The power delivered by the charger must be between 2 Watts (minimum) and 5 Watts (maximum) to achieve optimal charging speed.
Pairing
Follow these steps to pair your headphones with a device:
- Press and hold the multi-function button on the headset for 3 seconds to turn on the headset. The blue indicator light will turn on once, accompanied by a "power on" prompt sound.
- The red and blue lights will then flash alternately, indicating the headset has entered pairing mode.
- On your device, enable Bluetooth, search for "SOUNDPEATS Q40 HD" in the list of available devices, and select it to connect.
- Once successfully connected, the blue LED indicator will remain steady. The headset will automatically reconnect to the last paired device when turned on subsequently.
Pairing Notes:
- If the headset is already connected to a device, you can simultaneously press the "Volume +" and "Volume -" buttons for 3 seconds to disconnect from the current device and re-enter pairing mode.
- If no device is connected to the SoundPEATS Q40 HD headphones within 3 minutes while in pairing mode, the headphones will automatically shut down.
Multi-Device Connection
Your SoundPEATS Q40 HD headphones support connecting to two devices simultaneously. This feature is off by default if LDAC is enabled. To use multi-device connection, you must disable LDAC in the app settings first.

Multi-device connection process.
- Turn on the headset and enter pairing state.
- Connect to Device A. After successful connection, turn off Bluetooth on Device A. The headset will re-enter pairing mode.
- Turn on Bluetooth on Device B and connect to "SOUNDPEATS Q40 HD" to complete pairing.
- Turn on Bluetooth on Device A again and click on the previously paired earphone name. The pairing will be successful, and the earphone will now be connected to both devices simultaneously.
Note: LDAC is enabled by default. To enable dual-device connection, please disable the LDAC option in the SoundPEATS app settings before activating the dual-device connection feature.
Operating Instructions
Basic Functions
| Function | Operation |
|---|---|
| Power On | Long press the multi-function button for 3 seconds (blue light turns on once) |
| Power Off | Long press the multi-function button for 3 seconds (red light turns on once) |
| Volume Up/Down | Short press the Volume +/- button once |
| Next Song/Previous Song | Long press the Volume +/- button for 2 seconds |
| Answer/End Call/Pause Music | Short press the multi-function button once |
| Reject Call | Press and hold the multi-function button for 1.5 seconds |
| Call Conversion (during a call) | Double-click the multi-function button to switch between multi-party calls |
| Voice Assistant | Double-click the multi-function button |
| Restore Factory Settings | While charging, press the multi-function button for 3 seconds (blue light flashes quickly) |
APP Features
The SoundPEATS app enhances your headphone experience with various customizable features.
Video demonstrating the SoundPEATS app features, including connection, game mode, dual device connection, movie mode, dynamic EQ, adaptive EQ, EQ presets, custom EQ, device information, firmware upgrade, reset, prompt tone language switch, prompt volume setting, and find my earbuds function.
To use the app features:
- Open the official SoundPEATS app (PEATSAUDIO), enter your registered email and password to log in.
- After logging in, go to the main interface and tap "Connect Device" to pair your earphones.
- Once connected, you will enter the SoundPEATS Q40 HD function interface.
Functional Operations within the App:
- Game Mode: Experience low-latency gaming mode.
- Dual Device Connection: This function conflicts with LDAC; you must disable LDAC to enable it.
- Movie Mode: Enjoy 360° surround sound.
- Dynamic EQ: Enables a more advanced 3-band equalization algorithm.
- EQ - Adaptive: Tests hearing sensitivity across different audio frequencies and automatically generates a personalized EQ.
- EQ - Presets: Choose from 9 professionally tuned preset EQ styles.
- EQ - Custom: Customize your own EQ based on your personal listening preferences.
- More Features: Tap "More Features" to enter the advanced function interface and explore additional options.
- Device Information: View detailed device information (Product name, Bluetooth address, Firmware version).
- Firmware Upgrade: Update the earphones' firmware.
- Reset: Restore factory settings.
- Switch Earphone Voice Prompts: Adjust the prompt language (English, Chinese, German, Japanese) according to your country.
- Prompt Volume Setting: Customize the volume of voice prompts.
- Find My Earbuds: When connected, tap to locate the L/R earbud—the earbud will emit sound to help you find it.
Maintenance
To ensure the longevity and optimal performance of your SoundPEATS Q40 HD headphones, follow these maintenance guidelines:
- Cleaning: Regularly clean the ear tips and the sound outlet of the earphones to prevent wax or debris buildup, which can affect sound quality. Use a soft, dry cloth. For stubborn debris in the sound outlet, a small brush or cotton swab can be used gently.
- Storage: When not in use, store the headphones in their charging case or a protective pouch to prevent tangling and damage. The magnetic suction design helps keep the earbuds together.
- Avoid Extreme Conditions: Do not expose the headphones to extreme temperatures, humidity, or direct sunlight for extended periods.
- Water and Dust Resistance: While the headphones are IP67 rated for sweat and dust resistance, avoid submerging them in water. Ensure the charging port cover is tightly closed after charging to prevent liquid ingress.
- Charging Port: Keep the Type-C charging port clean and free of dust or debris.
Troubleshooting
If you encounter any issues with your SoundPEATS Q40 HD headphones, refer to the table below for common problems and solutions.
| Problem | Possible Cause / Solution |
|---|---|
| Cannot charge the charging case |
|
| Earphones not charging |
|
| Cannot power on |
|
| Cannot connect via TWS |
|
| Cannot pair |
|
| No sound |
|
| Low sound volume |
|
| Noise or intermittent sound |
|
Specifications
Here are the technical specifications for your SoundPEATS Q40 HD headphones:
| Feature | Specification |
|---|---|
| Brand Name | SoundPEATS |
| Model | SoundPEATS Q40 HD |
| Material | ABS |
| Battery Capacity | 60mAh*2 |
| Battery Life (playback) | Up to 20 hours |
| Sound Isolating | Yes |
| Category | Earphones & Headphones |
| Earcups Type | Semi-open |
| Charging Method | Charging case |
| Driver Diameter | 11mm |
| Impedance Range | up to 32 Ω |
| Bluetooth Version | Other (Specific version not provided, but supports LDAC) |
| Features | Dual Connection, Waterproof, With microphone, Support 360° Spatial Audio, Support AI Call Noise Cancelling, LDAC & Hi-Res Audio Certified |
| Codecs | AAC, SBC, LDAC |
| With Microphone | Yes |
| Wireless | Yes |
| Support APP | Yes |
| Waterproof Rating | IP67 |
| Frequency Response Range | 20 - 40000Hz |
| Sensitivity | 103dB |
| Plug Type | Line Type |
| Active Noise-Cancellation | No |
| Volume Control | Yes |
| Control Button | Yes |
| Vocalism Principle | Dynamic |
| Wireless Type | Bluetooth |
| Connectors | Type C |
| Communication | True wireless |
| Style | Neckband headphones |
| Certification | CE, FCC, RoHS, KC |
| Origin | Mainland China |
Additional Features:
- 11mm dual-magnet moving coil unit (PU + LCP) for layered sound quality.
- APP can open the specially tuned Dynamic EQ algorithm to restore lost high-frequency sound.
- 360 Pro Sound Spatial Sound Technology for an immersive music experience.
- LDAC (Hi-Res Certified) for 24-bit/96kHz high-fidelity audio transmission at up to 990kbps.
- AI Call Noise Reduction with high sensitivity microphone and deep learning neural network algorithms for clear calls.
- 0.07s low latency for gaming.
- Neck-hanging design with adjustable silicone neck-hanging adjusting bean for comfortable wear.
- Convenient 3-button in-line control for easy song playback and call management.
- Left and right ear magnetic suction design for easy carrying and storage.
- Dual-color mold injection molding for enhanced feel, durability, and comfortable button design.
User Tips
Based on user feedback, here are some tips to enhance your experience:
- For the best sound quality, especially with LDAC, ensure your device supports it. Android devices generally support LDAC, but iOS devices do not.
- If you experience noise or intermittent sound, try to reduce obstacles between your headphones and the connected device, and avoid environments with strong electromagnetic interference.
- To optimize volume, set your smartphone's Bluetooth volume to maximum and adjust the headphone volume directly. Some users recommend turning off volume synchronization in phone settings.
- Experiment with the "adaptive equalizer" in the SoundPEATS app for a personalized sound profile.
- The included variety of ear pads and ear supports are crucial for finding the most comfortable and secure fit, which also impacts sound isolation and quality.
- Regularly clean the ear tips and sound outlets to maintain clear audio and prevent earwax buildup.
Safety and Compliance Information
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. The distance between user and products should be no less than 20cm. The EUT is for indoor use only.
ISED Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
This device complies with ISED RF radiation exposure limits set forth for an uncontrolled environment.
Waste Disposal and Recycling
The crossed-out wheeled bin symbol on batteries or accumulators indicates that they must not be disposed of with household waste at the end of their service life. If batteries or accumulators contain mercury (Hg), cadmium (Cd), or lead (Pb), the corresponding chemical symbol will be found below the crossed-out wheeled bin symbol. You are legally obliged to return used batteries and accumulators. You can do this free of charge at retail stores or other collection points near you.
Electrical and electronic equipment that has become waste is referred to as old equipment. Owners of old equipment must ensure that it is collected separately and not mixed with unsorted household waste. Old equipment should not be disposed of in household waste but should be taken to special collection and return systems.
Old equipment often contains sensitive personal data, particularly information and telecommunications equipment such as computers and smartphones. In your own interest, please note that each end-user is responsible for deleting data on old equipment to be disposed of.
Warranty and Support
12-Month Quality Assurance Service
This product is covered by a 12-month warranty from the date of purchase against initial defects. Within the warranty period, we offer returns, exchanges, or refunds for all quality-related issues.
*The warranty does not cover product damage or malfunction due to improper operation by the purchaser, or purchases from other retailers or sellers.
If you have any questions or concerns, please feel free to contact us via email. We aim to respond within 24 hours.
Support Email: support@soundpeats.com
Official Website: www.soundpeats.com
Manufacturer Information
Shenzhen SoundSOUL Information Technology Company Limited
Room 1308-1309, Building B, Huihai Square, Chuangye Road,
Longhua District, Shenzhen, China. 518109
For a comprehensive user manual in PDF format, please refer to the official document available at: SoundPEATS Q40 HD User Manual (PDF)